NEWS

@@ -271,6 +271,36 @@ CHANGES WITH 250:
           monotonic clock even without RTC hardware and with some robustness
           against abnormal system shutdown.
 
+        * .network files gained a new UplinkInterface in the [IPv6SendRA]
+          section, for automatically propagating DNS settings from other
+          interfaces.
+
+        * The static lease DHCP server logic in systemd-networkd may now serve
+          IP addresses outside of the configured IP pool range for the server.
+
+        * CAN support in systemd-networkd gained four new settings Loopback=,
+          OneShot=, PresumeAck=, ClassicDataLengthCode= for tweaking CAN
+          control modes. It gained a number of further settings for tweaking
+          CAN timing quanta.
+
+        * The [CAN] section in .network file gained new TimeQuantaNSec=,
+          PropagationSegment=, PhaseBufferSegment1=, PhaseBufferSegment2=,
+          SyncJumpWidth=, DataTimeQuantaNSec=, DataPropagationSegment=,
+          DataPhaseBufferSegment1=, DataPhaseBufferSegment2=, and
+          DataSyncJumpWidth= settings to control bit-timing processed by the
+          CAN interface.
+
+        * DHCPv4 client support in systemd-networkd learnt a new Label= option
+          for configuring the address label to apply to configure IPv4
+          addresses.
+
+        * The various systemd-udevd "ethtool" buffer settings now understand
+          the special value "max" to configure the buffers to the maximum the
+          hardware supports.
+
+        * systemd-udevd's .link files may now configure a large variety of
+          NIC coalescing settings, plus more hardware offload settings.
+
         * systemd-analyze verify gained support for a pair of new --image= +
           --root= switches for verifying units below a specific root
           directory/image instead of on the host.
@@ -311,33 +341,40 @@ CHANGES WITH 250:
           including the build-id and other info described on:
           https://systemd.io/COREDUMP_PACKAGE_METADATA/
 
-        * .network files gained a new UplinkInterface= in the [IPv6SendRA]
-          section, for automatically propagating DNS settings from other
-          interfaces.
-
-        * The static lease DHCP server logic in systemd-networkd may now serve
-          IP addresses outside of the configured IP pool range for the server.
-
-        * CAN support in systemd-networkd gained four new settings Loopback=,
-          OneShot=, PresumeAck=, ClassicDataLengthCode= for tweaking CAN
-          control modes. It gained a number of further settings for tweaking
-          CAN timing quanta.
-
-        * The [CAN] section in .network file gained new TimeQuantaNSec=,
-          PropagationSegment=, PhaseBufferSegment1=, PhaseBufferSegment2=,
-          SyncJumpWidth=, DataTimeQuantaNSec=, DataPropagationSegment=,
-          DataPhaseBufferSegment1=, DataPhaseBufferSegment2=, and
-          DataSyncJumpWidth= settings to control bit-timing processed by the
-          CAN interface.
-
-        * DHCPv4 client support in systemd-networkd learnt a new Label= option
-          for configuring the address label to apply to configure IPv4
-          addresses.
-
         * The [IPv6AcceptRA] section of .network files gained support for a new
           UseMTU= setting that may be used to control whether to apply the
           announced MTU settings to the local interface.
 
+        * systemd-networkd now ships with new default .network files:
+          80-container-vb.network which matches host-side network bridge device
+          created by systemd-nspawn's --network-bridge or --network-zone
+          switch, and 80-6rd-tunnel.network which matches automatically created
+          sit tunnel with 6rd prefix when the DHCP 6RD option is received.
+
+        * systemd-networkd and systemd-udevd now support IP over InfiniBand
+          interfaces. The Kind= setting in .netdev file accepts "ipoib". And
+          systemd.netdev files gained the [IPoIB] section.
+
+        * systemd-networkd and systemd-udevd now support net.ifname-policy=
+          option on the kernel command-line. This is implemented through the
+          systemd-network-generator service that automatically generates
+          appropriate .link, .network, and .netdev files.
+
+        * systemd-networkd's handling of Endpoint= resolution for WireGuard
+          interfaces has been improved.
+
+        * systemd-networkd will now automatically configure routes to addresses
+          specified in AllowedIPs=. This feature can be controlled via RouteTable=
+          and RouteMetric= settings in [WireGuard] or [WireGuardPeer] sections.
+
+        * systemd-networkd will now once again automatically generate persistent
+          MAC addresses for batadv and bridge interfaces. Users can disable this
+          by using MACAddress=none in .netdev files.
+
+        * .link files gained a new WakeOnLanPassword= setting in the [Link]
+          section that allows to specify a WoL "SecureOn" password on hardware
+          that supports this.
+
         * The [DHCPv4] section in .network file gained a new Use6RD= boolean
           setting to control whether the DHCPv4 client request and process the
           DHCP 6RD option.
@@ -364,6 +401,11 @@ CHANGES WITH 250:
           [IPv6AcceptRA] section to control when the DHCPv6 client is started
           and how the delegated prefixes are handled by the DHCPv6 client.
 
+        * The [CAKE] section of .network files gained various new settings
+          AutoRateIngress=, CompensationMode=, FlowIsolationMode=, NAT=,
+          MPUBytes=, PriorityQueueingPreset=, FirewallMark=, Wash=, SplitGSO=,
+          and UseRawPacketSize= for configuring CAKE.
+
         * The IPv6Token= section in the [Network] section is deprecated, and
           the [IPv6AcceptRA] section gained the Token= setting for its
           replacement. The [IPv6Prefix] section also gained the Token= setting.
@@ -383,49 +425,6 @@ CHANGES WITH 250:
         * The [DHCPServer] section of .network file gained a new Router=
           setting to specify the router address.
 
-        * The [CAKE] section of .network files gained various new settings
-          AutoRateIngress=, CompensationMode=, FlowIsolationMode=, NAT=,
-          MPUBytes=, PriorityQueueingPreset=, FirewallMark=, Wash=, SplitGSO=,
-          and UseRawPacketSize= for configuring CAKE.
-
-        * systemd-networkd now ships with new default .network files:
-          80-container-vb.network which matches host-side network bridge device
-          created by systemd-nspawn's --network-bridge or --network-zone
-          switch, and 80-6rd-tunnel.network which matches automatically created
-          sit tunnel with 6rd prefix when the DHCP 6RD option is received.
-
-        * systemd-networkd's handling of Endpoint= resolution for WireGuard
-          interfaces has been improved.
-
-        * systemd-networkd will now automatically configure routes to addresses
-          specified in AllowedIPs=. This feature can be controlled via
-          RouteTable= and RouteMetric= settings in [WireGuard] or
-          [WireGuardPeer] sections.
-
-        * systemd-networkd will now once again automatically generate persistent
-          MAC addresses for batadv and bridge interfaces. Users can disable this
-          by using MACAddress=none in .netdev files.
-
-        * systemd-networkd and systemd-udevd now support IP over InfiniBand
-          interfaces. The Kind= setting in .netdev file accepts "ipoib". And
-          systemd.netdev files gained the [IPoIB] section.
-
-        * systemd-networkd and systemd-udevd now support net.ifname-policy=
-          option on the kernel command-line. This is implemented through the
-          systemd-network-generator service that automatically generates
-          appropriate .link, .network, and .netdev files.
-
-        * The various systemd-udevd "ethtool" buffer settings now understand
-          the special value "max" to configure the buffers to the maximum the
-          hardware supports.
-
-        * systemd-udevd's .link files may now configure a large variety of
-          NIC coalescing settings, plus more hardware offload settings.
-
-        * .link files gained a new WakeOnLanPassword= setting in the [Link]
-          section that allows to specify a WoL "SecureOn" password on hardware
-          that supports this.
-
         * systemd-nspawn's --setenv= switch now supports an additional syntax:
           if only a variable name is specified (i.e. without being suffixed by
           a '=' character and a value) the current value of the environment

TODO

@@ -4,6 +4,9 @@ Bugfixes:
   manager or system manager can be always set. It would be better to reject
   them when parsing config.
 
+* userdbctl: "Password OK: yes" is shown even when there are no passwords
+  or the password is locked.
+
 * Jun 01 09:43:02 krowka systemd[1]: Unit user@1000.service has alias user@.service.
   Jun 01 09:43:02 krowka systemd[1]: Unit user@6.service has alias user@.service.
   Jun 01 09:43:02 krowka systemd[1]: Unit user-runtime-dir@6.service has alias user-runtime-dir@.service.

man/sd_event_add_inotify.xml

@@ -81,7 +81,7 @@
     further information.</para>
 
     <para>The <parameter>handler</parameter> must reference a function to call when the inode changes or
-    <constant>NULL</constant>. The handler function will be passed the <parameter>userdata</parameter> pointer,
+    <contant>NULL</contant>. The handler function will be passed the <parameter>userdata</parameter> pointer,
     which may be chosen freely by the caller. The handler also receives a pointer to a <structname>struct
     inotify_event</structname> structure containing information about the inode event. The handler may return
     negative to signal an error (see below), other return values are ignored. If

src/basic/user-util.h

@@ -114,10 +114,6 @@ int is_this_me(const char *username);
 
 const char *get_home_root(void);
 
-static inline bool hashed_password_is_locked_or_invalid(const char *password) {
-        return password && password[0] != '$';
-}
-
 /* A locked *and* invalid password for "struct spwd"'s .sp_pwdp and "struct passwd"'s .pw_passwd field */
 #define PASSWORD_LOCKED_AND_INVALID "!*"
 

src/shared/user-record-show.c

@@ -132,28 +132,10 @@ void user_record_show(UserRecord *hr, bool show_full_group_info) {
                         break;
                 }
 
-                if (strv_isempty(hr->hashed_password)) {
-                        if (hr->incomplete) /* Record might be incomplete, due to privs */
-                                break;
-                        printf(" Password OK: %sno%s (none set)\n", ansi_highlight(), ansi_normal());
-                        break;
-                }
-                if (strv_contains(hr->hashed_password, "")) {
-                        printf(" Password OK: %sno%s (empty set)\n", ansi_highlight_red(), ansi_normal());
-                        break;
-                }
-                bool has_valid_passwords = false;
-                char **p;
-                STRV_FOREACH(p, hr->hashed_password)
-                        if (!hashed_password_is_locked_or_invalid(*p)) {
-                                has_valid_passwords = true;
-                                break;
-                        }
-                if (has_valid_passwords)
-                        printf(" Password OK: %syes%s\n", ansi_highlight_green(), ansi_normal());
-                else
-                        printf(" Password OK: %sno%s (locked)\n", ansi_highlight(), ansi_normal());
+                printf(" Password OK: %syes%s\n", ansi_highlight_green(), ansi_normal());
+                break;
         }
+
         if (uid_is_valid(hr->uid))
                 printf("         UID: " UID_FMT "\n", hr->uid);
         if (gid_is_valid(hr->gid)) {

tools/debug-sd-boot.sh

@@ -21,7 +21,7 @@ if [[ $# -lt 2 ]]; then
     echo "    (gdb) source GDBSCRIPT"
     echo "    (gdb) target remote :1234"
     echo
-    echo "Example usage:"
+    echo "Exmaple usage:"
     echo "    mkfifo /tmp/sdboot.{in,out}"
     echo "    qemu-system-x86_64 [...] -s -serial pipe:/tmp/sdboot"
     echo "    ./tools/debug-sd-boot.sh ./build/src/boot/efi/systemd-bootx64.efi \\"