core: increment start limit counter only when we can start the unit

Otherwise, e.g. requesting to start a unit that is under stopping may
enter the failed state.

This makes
- rename .can_start() -> .test_startable(), and make it allow to return
  boolean and refuse to start units when it returns false,
- refuse earlier to start units that are in the deactivating state, so
  several redundant conditions in .start() can be dropped,
- move checks for unit states mapped to UNIT_ACTIVATING from .start() to
  .test_startable().

Fixes #39247.

src/core/automount.c

@@ -1039,7 +1039,7 @@ static bool automount_supported(void) {
         return supported;
 }
 
-static int automount_can_start(Unit *u) {
+static int automount_test_startable(Unit *u) {
         Automount *a = ASSERT_PTR(AUTOMOUNT(u));
         int r;
 
@@ -1049,7 +1049,7 @@ static int automount_can_start(Unit *u) {
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 static const char* const automount_result_table[_AUTOMOUNT_RESULT_MAX] = {
@@ -1115,5 +1115,5 @@ const UnitVTable automount_vtable = {
                 },
         },
 
-        .can_start = automount_can_start,
+        .test_startable = automount_test_startable,
 };

src/core/mount.c

@@ -1363,19 +1363,6 @@ static int mount_start(Unit *u) {
         Mount *m = ASSERT_PTR(MOUNT(u));
         int r;
 
-        /* We cannot fulfill this request right now, try again later
-         * please! */
-        if (IN_SET(m->state,
-                   MOUNT_UNMOUNTING,
-                   MOUNT_UNMOUNTING_SIGTERM,
-                   MOUNT_UNMOUNTING_SIGKILL,
-                   MOUNT_CLEANING))
-                return -EAGAIN;
-
-        /* Already on it! */
-        if (IN_SET(m->state, MOUNT_MOUNTING, MOUNT_MOUNTING_DONE))
-                return 0;
-
         assert(IN_SET(m->state, MOUNT_DEAD, MOUNT_FAILED));
 
         r = unit_acquire_invocation_id(u);
@@ -2382,10 +2369,14 @@ static int mount_can_clean(Unit *u, ExecCleanMask *ret) {
         return exec_context_get_clean_mask(&m->exec_context, ret);
 }
 
-static int mount_can_start(Unit *u) {
+static int mount_test_startable(Unit *u) {
         Mount *m = ASSERT_PTR(MOUNT(u));
         int r;
 
+        /* It is already being started. */
+        if (IN_SET(m->state, MOUNT_MOUNTING, MOUNT_MOUNTING_DONE))
+                return false;
+
         r = unit_test_start_limit(u);
         if (r < 0) {
                 mount_enter_dead(m, MOUNT_FAILURE_START_LIMIT_HIT, /* flush_result = */ false);
@@ -2395,7 +2386,7 @@ static int mount_can_start(Unit *u) {
         if (!get_mount_parameters_fragment(m))
                 return -ENOENT;
 
-        return 1;
+        return true;
 }
 
 static int mount_subsystem_ratelimited(Manager *m) {
@@ -2561,7 +2552,7 @@ const UnitVTable mount_vtable = {
                 },
         },
 
-        .can_start = mount_can_start,
+        .test_startable = mount_test_startable,
 
         .notify_plymouth = true,
 };

src/core/path.c

@@ -898,7 +898,7 @@ static void path_reset_failed(Unit *u) {
         p->result = PATH_SUCCESS;
 }
 
-static int path_can_start(Unit *u) {
+static int path_test_startable(Unit *u) {
         Path *p = ASSERT_PTR(PATH(u));
         int r;
 
@@ -908,7 +908,7 @@ static int path_can_start(Unit *u) {
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 static void activation_details_path_done(ActivationDetails *details) {
@@ -1042,7 +1042,7 @@ const UnitVTable path_vtable = {
 
         .bus_set_property = bus_path_set_property,
 
-        .can_start = path_can_start,
+        .test_startable = path_test_startable,
 };
 
 const ActivationDetailsVTable activation_details_path_vtable = {

src/core/service.c

@@ -2951,17 +2951,6 @@ static int service_start(Unit *u) {
         Service *s = ASSERT_PTR(SERVICE(u));
         int r;
 
-        /* We cannot fulfill this request right now, try again later
-         * please! */
-        if (IN_SET(s->state,
-                   SERVICE_STOP, SERVICE_STOP_WATCHDOG, SERVICE_STOP_SIGTERM, SERVICE_STOP_SIGKILL, SERVICE_STOP_POST,
-                   SERVICE_FINAL_WATCHDOG, SERVICE_FINAL_SIGTERM, SERVICE_FINAL_SIGKILL, SERVICE_CLEANING))
-                return -EAGAIN;
-
-        /* Already on it! */
-        if (IN_SET(s->state, SERVICE_CONDITION, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST))
-                return 0;
-
         if (s->state == SERVICE_AUTO_RESTART) {
                 /* As mentioned in unit_start(), we allow manual starts to act as "hurry up" signals
                  * for auto restart. We need to re-enqueue the job though, as the job type has changed
@@ -5558,10 +5547,17 @@ static const char* service_finished_job(Unit *u, JobType t, JobResult result) {
         return NULL;
 }
 
-static int service_can_start(Unit *u) {
+static int service_test_startable(Unit *u) {
         Service *s = ASSERT_PTR(SERVICE(u));
         int r;
 
+        /* First check the state, and do not increment start limit counter if the service cannot start due to
+         * that e.g. it is already being started. Note, the service states mapped to UNIT_ACTIVE,
+         * UNIT_RELOADING, UNIT_DEACTIVATING, UNIT_MAINTENANCE, and UNIT_REFRESHING are already filtered in
+         * unit_start(). Hence, here we only need to check states that mapped to UNIT_ACTIVATING. */
+        if (IN_SET(s->state, SERVICE_CONDITION, SERVICE_START_PRE, SERVICE_START, SERVICE_START_POST))
+                return false;
+
         /* Make sure we don't enter a busy loop of some kind. */
         r = unit_test_start_limit(u);
         if (r < 0) {
@@ -5569,7 +5565,7 @@ static int service_can_start(Unit *u) {
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 static void service_release_resources(Unit *u) {
@@ -5851,7 +5847,7 @@ const UnitVTable service_vtable = {
                 .finished_job = service_finished_job,
         },
 
-        .can_start = service_can_start,
+        .test_startable = service_test_startable,
 
         .notify_plymouth = true,
 

src/core/socket.c

@@ -2623,26 +2623,6 @@ static int socket_start(Unit *u) {
         Socket *s = ASSERT_PTR(SOCKET(u));
         int r;
 
-        /* We cannot fulfill this request right now, try again later
-         * please! */
-        if (IN_SET(s->state,
-                   SOCKET_STOP_PRE,
-                   SOCKET_STOP_PRE_SIGKILL,
-                   SOCKET_STOP_PRE_SIGTERM,
-                   SOCKET_STOP_POST,
-                   SOCKET_FINAL_SIGTERM,
-                   SOCKET_FINAL_SIGKILL,
-                   SOCKET_CLEANING))
-                return -EAGAIN;
-
-        /* Already on it! */
-        if (IN_SET(s->state,
-                   SOCKET_START_PRE,
-                   SOCKET_START_OPEN,
-                   SOCKET_START_CHOWN,
-                   SOCKET_START_POST))
-                return 0;
-
         /* Cannot run this without the service being around */
         if (UNIT_ISSET(s->service)) {
                 Service *service = ASSERT_PTR(SERVICE(UNIT_DEREF(s->service)));
@@ -3650,17 +3630,25 @@ static int socket_can_clean(Unit *u, ExecCleanMask *ret) {
         return exec_context_get_clean_mask(&s->exec_context, ret);
 }
 
-static int socket_can_start(Unit *u) {
+static int socket_test_startable(Unit *u) {
         Socket *s = ASSERT_PTR(SOCKET(u));
         int r;
 
+        /* It is already being started. */
+        if (IN_SET(s->state,
+                   SOCKET_START_PRE,
+                   SOCKET_START_OPEN,
+                   SOCKET_START_CHOWN,
+                   SOCKET_START_POST))
+                return false;
+
         r = unit_test_start_limit(u);
         if (r < 0) {
                 socket_enter_dead(s, SOCKET_FAILURE_START_LIMIT_HIT);
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 static const char* const socket_exec_command_table[_SOCKET_EXEC_COMMAND_MAX] = {
@@ -3801,5 +3789,5 @@ const UnitVTable socket_vtable = {
                 },
         },
 
-        .can_start = socket_can_start,
+        .test_startable = socket_test_startable,
 };

src/core/swap.c

@@ -864,19 +864,6 @@ static int swap_start(Unit *u) {
         int r;
 
         assert(s);
-
-        /* We cannot fulfill this request right now, try again later please! */
-        if (IN_SET(s->state,
-                   SWAP_DEACTIVATING,
-                   SWAP_DEACTIVATING_SIGTERM,
-                   SWAP_DEACTIVATING_SIGKILL,
-                   SWAP_CLEANING))
-                return -EAGAIN;
-
-        /* Already on it! */
-        if (s->state == SWAP_ACTIVATING)
-                return 0;
-
         assert(IN_SET(s->state, SWAP_DEAD, SWAP_FAILED));
 
         if (detect_container() > 0)
@@ -1521,17 +1508,21 @@ static int swap_can_clean(Unit *u, ExecCleanMask *ret) {
         return exec_context_get_clean_mask(&s->exec_context, ret);
 }
 
-static int swap_can_start(Unit *u) {
+static int swap_test_startable(Unit *u) {
         Swap *s = ASSERT_PTR(SWAP(u));
         int r;
 
+        /* It is already being started. */
+        if (s->state == SWAP_ACTIVATING)
+                return false;
+
         r = unit_test_start_limit(u);
         if (r < 0) {
                 swap_enter_dead(s, SWAP_FAILURE_START_LIMIT_HIT);
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 int swap_get_priority(const Swap *s) {
@@ -1652,7 +1643,7 @@ const UnitVTable swap_vtable = {
                 },
         },
 
-        .can_start = swap_can_start,
+        .test_startable = swap_test_startable,
 
         .notify_plymouth = true,
 };

src/core/timer.c

@@ -906,7 +906,7 @@ static int timer_can_clean(Unit *u, ExecCleanMask *ret) {
         return 0;
 }
 
-static int timer_can_start(Unit *u) {
+static int timer_test_startable(Unit *u) {
         Timer *t = ASSERT_PTR(TIMER(u));
         int r;
 
@@ -916,7 +916,7 @@ static int timer_can_start(Unit *u) {
                 return r;
         }
 
-        return 1;
+        return true;
 }
 
 static void activation_details_timer_serialize(const ActivationDetails *details, FILE *f) {
@@ -1093,7 +1093,7 @@ const UnitVTable timer_vtable = {
 
         .bus_set_property = bus_timer_set_property,
 
-        .can_start = timer_can_start,
+        .test_startable = timer_test_startable,
 };
 
 const ActivationDetailsVTable activation_details_timer_vtable = {

src/core/unit.c

@@ -1936,7 +1936,7 @@ int unit_start(Unit *u, ActivationDetails *details) {
         state = unit_active_state(u);
         if (UNIT_IS_ACTIVE_OR_RELOADING(state))
                 return -EALREADY;
-        if (state == UNIT_MAINTENANCE)
+        if (IN_SET(state, UNIT_DEACTIVATING, UNIT_MAINTENANCE))
                 return -EAGAIN;
 
         /* Units that aren't loaded cannot be started */
@@ -1983,10 +1983,11 @@ int unit_start(Unit *u, ActivationDetails *details) {
         if (u->freezer_state != FREEZER_RUNNING)
                 return -EDEADLK;
 
-        /* Check our ability to start early so that failure conditions don't cause us to enter a busy loop. */
+        /* Check our ability to start early so that ratelimited or already starting/started units don't
-        if (UNIT_VTABLE(u)->can_start) {
+         * cause us to enter a busy loop. */
-                r = UNIT_VTABLE(u)->can_start(u);
+        if (UNIT_VTABLE(u)->test_startable) {
-                if (r < 0)
+                r = UNIT_VTABLE(u)->test_startable(u);
+                if (r <= 0)
                         return r;
         }
 

src/core/unit.h

@@ -726,8 +726,8 @@ typedef struct UnitVTable {
         bool (*supported)(void);
 
         /* If this function is set, it's invoked first as part of starting a unit to allow start rate
-         * limiting checks to occur before we do anything else. */
+         * limiting checks and unit state checks to occur before we do anything else. */
-        int (*can_start)(Unit *u);
+        int (*test_startable)(Unit *u);
 
         /* Returns > 0 if the whole subsystem is ratelimited, and new start operations should not be started
          * for this unit type right now. */

test/units/TEST-07-PID1.start-limit.sh

@@ -0,0 +1,42 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eux
+set -o pipefail
+
+# For issue #39247.
+
+at_exit() {
+    set +e
+
+    rm -rf /run/systemd/system/systemd-resolved.service.d/
+    systemctl daemon-reload
+    systemctl restart systemd-resolved.service
+}
+
+trap at_exit EXIT
+
+mkdir -p /run/systemd/system/systemd-resolved.service.d/
+cat >/run/systemd/system/systemd-resolved.service.d/99-start-limit.conf <<EOF
+[Unit]
+StartLimitBurst=5
+StartLimitInterval=30
+
+[Service]
+ExecStopPost=sleep 10
+EOF
+
+systemctl daemon-reload
+systemctl restart systemd-resolved.service
+systemctl reset-failed systemd-resolved.service
+systemctl status --no-pager systemd-resolved.service
+systemctl show systemd-resolved.service | grep StartLimit
+
+for i in {1..5}; do
+    echo "Start #$i"
+
+    systemctl stop --no-block systemd-resolved.service
+    if ! resolvectl; then
+        journalctl -o short-monotonic --no-hostname --no-pager -u systemd-resolved.service -n 15
+        exit 1
+    fi
+done

test/units/TEST-74-AUX-UTILS.socket-activate.sh

@@ -11,7 +11,7 @@ assert_in systemd-socket "$(cat /proc/"$PID"/comm)"
 assert_eq "$(echo -n hello | socat - 'TCP:localhost:1234')" hello
 assert_in systemd-socket "$(cat /proc/"$PID"/comm)"
 kill "$PID"
-wait "$PID" || :
+tail --pid="$PID" -f /dev/null
 
 PID=$(systemd-notify --fork -- systemd-socket-activate -l 1234 --now socat ACCEPT-FD:3 PIPE)
 for _ in {1..100}; do
@@ -24,7 +24,7 @@ for _ in {1..100}; do
 
     if [[ "$(cat /proc/"$PID"/comm || :)" =~ socat ]]; then
         assert_eq "$(echo -n bye | socat - 'TCP:localhost:1234')" bye
-        wait "$PID" || :
+        tail --pid="$PID" -f /dev/null
         break
     fi
 done