NEWS

@@ -257,13 +257,13 @@ CHANGES WITH 245 in spe:
           permanent MAC address of a network device even if a randomized MAC
           address is used.
 
-        * systemd-logind will now validate access to the operation for changing
+       * systemd-logind will now validate access to the operation for changing
-          virtual terminals via a PolicyKit action. By default only users with
+         virtual terminals via a PolicyKit action. By default only users with
-          at least one session on a local VT will get access to the method call.
+         at least one session on a local VT will get access to the method call.
 
-        * When systemd sets up PAM sessions that invoked service processes shall
+       * When systemd sets up PAM sessions that invoked service processes shall
-          run in, the pam_setcred() API is now invoked, thus permitting PAM
+         run in, the pam_setcred() API is now invoked, thus permitting PAM
-          modules to set additional credentials for the processes.
+         modules to set additional credentials for the processes.
 
         …
 

TODO

@@ -44,9 +44,6 @@ Features:
 * cryptsetup: allow encoding key directly in /etc/crypttab, maybe with a
   "base64:" prefix. Useful in particular for pkcs11 mode.
 
-* cryptsetup: reimplement the mkswap/mke2fs in cryptsetup-generator to use
-  systemd-makefs.service instead.
-
 * socket units: allow creating a udev monitor socket with ListenDevices= or so,
   with matches, then actviate app thorugh that passing socket oveer
 

man/systemd.network.xml

@@ -1926,14 +1926,15 @@
         <term><varname>EmitDNS=</varname></term>
         <term><varname>DNS=</varname></term>
 
-        <listitem><para><varname>DNS=</varname> specifies a list of recursive DNS server IPv6 addresses
+        <listitem><para><varname>DNS=</varname> specifies a list of recursive
-        that are distributed via Router Advertisement messages when <varname>EmitDNS=</varname> is
+        DNS server IPv6 addresses that distributed via Router Advertisement
-        true. <varname>DNS=</varname> also takes special value <literal>_link_local</literal>; in that
+        messages when <varname>EmitDNS=</varname> is true. If <varname>DNS=
-        case the IPv6 link local address is distributed. If <varname>DNS=</varname> is empty, DNS
+        </varname> is empty, DNS servers are read from the
-        servers are read from the <literal>[Network]</literal> section. If the
+        <literal>[Network]</literal> section. If the
-        <literal>[Network]</literal> section does not contain any DNS servers either, DNS servers from
+        <literal>[Network]</literal> section does not contain any DNS servers
-        the uplink with the highest priority default route are used. When <varname>EmitDNS=</varname>
+        either, DNS servers from the uplink with the highest priority default
-        is false, no DNS server information is sent in Router Advertisement messages.
+        route are used. When <varname>EmitDNS=</varname> is false, no DNS server
+        information is sent in Router Advertisement messages.
         <varname>EmitDNS=</varname> defaults to true.
         </para></listitem>
       </varlistentry>

man/systemd.special.xml

@@ -26,7 +26,6 @@
     <filename>cryptsetup-pre.target</filename>,
     <filename>cryptsetup.target</filename>,
     <filename>ctrl-alt-del.target</filename>,
-    <filename>blockdev@.target</filename>,
     <filename>boot-complete.target</filename>,
     <filename>default.target</filename>,
     <filename>emergency.target</filename>,
@@ -846,23 +845,6 @@
       not useful as only unit within a transaction.</para>
 
       <variablelist>
-        <varlistentry>
-          <term><filename>blockdev@.target</filename></term>
-          <listitem><para>This template unit may be used to order mount units and other consumers of block
-          devices against services that synthesize these block devices. This is intended to be used to order
-          storage services (such as
-          <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>)
-          that allocate and manage a virtual block device against mount units and other consumers of
-          it. Specifically, the storage services are supposed to be orderd before an instance of
-          <filename>blockdev@.target</filename>, and the mount unit (or other consuming unit, such as a swap
-          unit) after it. The ordering is particular relevant during shutdown, as it ensures that the mount
-          is deactivated first and the service backing the mount only deactivated after that completed. The
-          <filename>blockdev@.target</filename> instance should be pulled in via a <option>Wants=</option>
-          dependency of the storage daemon and thus generally not be part of any transaction unless a storage
-          daemon is used. The instance name for instances of this template unit is supposed to be the
-          properly escaped bock device node path, e.g. <filename>blockdev@dev-mapper-foobar.target</filename>
-          for a storage device <filename>/dev/mapper/foobar</filename>.</para></listitem>
-        </varlistentry>
         <varlistentry>
           <term><filename>cryptsetup-pre.target</filename></term>
           <listitem>

meson.build

@@ -3369,8 +3369,8 @@ if conf.get('ENABLE_EFI') == 1
                 status += [
                         'EFI machine type:                  @0@'.format(EFI_MACHINE_TYPE_NAME),
                         'EFI CC                             @0@'.format(' '.join(efi_cc)),
-                        'EFI lds:                           @0@'.format(efi_lds),
+                        'EFI lib directory:                 @0@'.format(efi_libdir),
-                        'EFI crt0:                          @0@'.format(efi_crt0),
+                        'EFI lds directory:                 @0@'.format(efi_ldsdir),
                         'EFI include directory:             @0@'.format(efi_incdir)]
         endif
 endif

meson_options.txt

@@ -323,6 +323,8 @@ option('efi-ld', type : 'string',
        description : 'the linker to use for EFI modules')
 option('efi-libdir', type : 'string',
        description : 'path to the EFI lib directory')
+option('efi-ldsdir', type : 'string',
+       description : 'path to the EFI lds directory')
 option('efi-includedir', type : 'string', value : '/usr/include/efi',
        description : 'path to the EFI header directory')
 option('tpm-pcrindex', type : 'integer', value : 8,

src/boot/efi/meson.build

@@ -64,19 +64,12 @@ if conf.get('ENABLE_EFI') == 1 and get_option('gnu-efi') != 'false'
 
         efi_libdir = get_option('efi-libdir')
         if efi_libdir == ''
-                # New location first introduced with gnu-efi 3.0.11
+                ret = run_command(efi_cc + ['-print-multi-os-directory'])
-                efi_libdir = join_paths('/usr/lib/gnuefi', EFI_MACHINE_TYPE_NAME)
+                if ret.returncode() == 0
-                cmd = run_command('test', '-e', efi_libdir)
+                        path = join_paths('/usr/lib', ret.stdout().strip())
-
+                        ret = run_command('realpath', '-e', path)
-                if cmd.returncode() != 0
+                        if ret.returncode() == 0
-                        # Fall back to the old approach
+                                efi_libdir = ret.stdout().strip()
-                        cmd = run_command(efi_cc + ['-print-multi-os-directory'])
-                        if cmd.returncode() == 0
-                                path = join_paths('/usr/lib', cmd.stdout().strip())
-                                cmd = run_command('realpath', '-e', path)
-                                if cmd.returncode() == 0
-                                        efi_libdir = cmd.stdout().strip()
-                                endif
                         endif
                 endif
         endif
@@ -102,35 +95,20 @@ if have_gnu_efi
 
         objcopy = find_program('objcopy')
 
-        efi_location_map = [
+        efi_ldsdir = get_option('efi-ldsdir')
-                # New locations first introduced with gnu-efi 3.0.11
+        arch_lds = 'elf_@0@_efi.lds'.format(gnu_efi_path_arch)
-                [join_paths(efi_libdir, 'efi.lds'),
+        if efi_ldsdir == ''
-                 join_paths(efi_libdir, 'crt0.o')],
+                efi_ldsdir = join_paths(efi_libdir, 'gnuefi')
-                # Older locations...
+                cmd = run_command('test', '-f', join_paths(efi_ldsdir, arch_lds))
-                [join_paths(efi_libdir, 'gnuefi', 'elf_@0@_efi.lds'.format(gnu_efi_path_arch)),
+                if cmd.returncode() != 0
-                 join_paths(efi_libdir, 'gnuefi', 'crt0-efi-@0@.o'.format(gnu_efi_path_arch))],
+                        efi_ldsdir = efi_libdir
-                [join_paths(efi_libdir, 'elf_@0@_efi.lds'.format(gnu_efi_path_arch)),
+                        cmd = run_command('test', '-f', join_paths(efi_ldsdir, arch_lds))
-                 join_paths(efi_libdir, 'crt0-efi-@0@.o'.format(gnu_efi_path_arch))]]
+                        if cmd.returncode() != 0
-        efi_lds = ''
+                               error('Cannot find @0@'.format(arch_lds))
-        foreach location : efi_location_map
-                if efi_lds == ''
-                        cmd = run_command('test', '-f', location[0])
-                        if cmd.returncode() == 0
-                                efi_lds = location[0]
-                                efi_crt0 = location[1]
                         endif
                 endif
-        endforeach
-        if efi_lds == ''
-                if get_option('gnu-efi') == 'true'
-                        error('gnu-efi support requested, but cannot find efi.lds')
-                else
-                        have_gnu_efi = false
-                endif
         endif
-endif
 
-if have_gnu_efi
         compile_args = ['-Wall',
                         '-Wextra',
                         '-std=gnu90',
@@ -167,13 +145,14 @@ if have_gnu_efi
                 compile_args += ['-O2']
         endif
 
-        efi_ldflags = ['-T', efi_lds,
+        efi_ldflags = ['-T',
+                       join_paths(efi_ldsdir, arch_lds),
                        '-shared',
                        '-Bsymbolic',
                        '-nostdlib',
                        '-znocombreloc',
                        '-L', efi_libdir,
-                       efi_crt0]
+                       join_paths(efi_ldsdir, 'crt0-efi-@0@.o'.format(gnu_efi_path_arch))]
         if efi_arch == 'aarch64' or efi_arch == 'arm'
                 # Aarch64 and ARM32 don't have an EFI capable objcopy. Use 'binary'
                 # instead, and add required symbols manually.
@@ -240,9 +219,11 @@ if have_gnu_efi
                 set_variable(tuple[0].underscorify(), so)
                 set_variable(tuple[0].underscorify() + '_stub', stub)
         endforeach
+endif
 
-        ############################################################
+############################################################
 
+if have_gnu_efi
         test_efi_disk_img = custom_target(
                 'test-efi-disk.img',
                 input : [systemd_boot_so, stub_so_stub],

src/core/dbus-job.c

@@ -3,7 +3,6 @@
 #include "sd-bus.h"
 
 #include "alloc-util.h"
-#include "bus-util.h"
 #include "dbus-job.h"
 #include "dbus-unit.h"
 #include "dbus.h"

src/core/dbus-manager.c

@@ -9,7 +9,6 @@
 #include "architecture.h"
 #include "build.h"
 #include "bus-common-errors.h"
-#include "bus-util.h"
 #include "dbus-cgroup.h"
 #include "dbus-execute.h"
 #include "dbus-job.h"

src/core/dbus-unit.c

@@ -6,7 +6,6 @@
 #include "bpf-firewall.h"
 #include "bus-common-errors.h"
 #include "bus-polkit.h"
-#include "bus-util.h"
 #include "cgroup-util.h"
 #include "condition.h"
 #include "dbus-job.h"

src/core/dbus.c

@@ -11,7 +11,6 @@
 #include "bus-error.h"
 #include "bus-internal.h"
 #include "bus-polkit.h"
-#include "bus-util.h"
 #include "dbus-automount.h"
 #include "dbus-cgroup.h"
 #include "dbus-device.h"

src/core/mount.c

@@ -217,7 +217,7 @@ static void mount_done(Unit *u) {
         m->timer_event_source = sd_event_source_unref(m->timer_event_source);
 }
 
-static MountParameters* get_mount_parameters_fragment(Mount *m) {
+_pure_ static MountParameters* get_mount_parameters_fragment(Mount *m) {
         assert(m);
 
         if (m->from_fragment)
@@ -226,7 +226,7 @@ static MountParameters* get_mount_parameters_fragment(Mount *m) {
         return NULL;
 }
 
-static MountParameters* get_mount_parameters(Mount *m) {
+_pure_ static MountParameters* get_mount_parameters(Mount *m) {
         assert(m);
 
         if (m->from_proc_self_mountinfo)
@@ -342,18 +342,20 @@ static int mount_add_device_dependencies(Mount *m) {
         if (!is_device_path(p->what))
                 return 0;
 
-        /* /dev/root is a really weird thing, it's not a real device, but just a path the kernel exports for
+        /* /dev/root is a really weird thing, it's not a real device,
-         * the root file system specified on the kernel command line. Ignore it here. */
+         * but just a path the kernel exports for the root file system
-        if (PATH_IN_SET(p->what, "/dev/root", "/dev/nfs"))
+         * specified on the kernel command line. Ignore it here. */
+        if (path_equal(p->what, "/dev/root"))
                 return 0;
 
         if (path_equal(m->where, "/"))
                 return 0;
 
-        /* Mount units from /proc/self/mountinfo are not bound to devices by default since they're subject to
+        /* Mount units from /proc/self/mountinfo are not bound to devices
-         * races when devices are unplugged. But the user can still force this dep with an appropriate option
+         * by default since they're subject to races when devices are
-         * (or udev property) so the mount units are automatically stopped when the device disappears
+         * unplugged. But the user can still force this dep with an
-         * suddenly. */
+         * appropriate option (or udev property) so the mount units are
+         * automatically stopped when the device disappears suddenly. */
         dep = mount_is_bound_to_device(m) ? UNIT_BINDS_TO : UNIT_REQUIRES;
 
         /* We always use 'what' from /proc/self/mountinfo if mounted */
@@ -363,7 +365,7 @@ static int mount_add_device_dependencies(Mount *m) {
         if (r < 0)
                 return r;
 
-        return unit_add_blockdev_dependency(UNIT(m), p->what, mask);
+        return 0;
 }
 
 static int mount_add_quota_dependencies(Mount *m) {

src/core/selinux-access.h

@@ -3,6 +3,7 @@
 
 #include "sd-bus.h"
 
+#include "bus-util.h"
 #include "manager.h"
 
 int mac_selinux_generic_access_check(sd_bus_message *message, const char *path, const char *permission, sd_bus_error *error);

src/core/swap.c

@@ -184,45 +184,21 @@ static int swap_arm_timer(Swap *s, usec_t usec) {
         return 0;
 }
 
-static SwapParameters* swap_get_parameters(Swap *s) {
-        assert(s);
-
-        if (s->from_proc_swaps)
-                return &s->parameters_proc_swaps;
-
-        if (s->from_fragment)
-                return &s->parameters_fragment;
-
-        return NULL;
-}
-
 static int swap_add_device_dependencies(Swap *s) {
-        UnitDependencyMask mask;
-        SwapParameters *p;
-        int r;
-
         assert(s);
 
         if (!s->what)
                 return 0;
 
-        p = swap_get_parameters(s);
+        if (!s->from_fragment)
-        if (!p)
                 return 0;
 
-        mask = s->from_proc_swaps ? UNIT_DEPENDENCY_PROC_SWAP : UNIT_DEPENDENCY_FILE;
+        if (is_device_path(s->what))
+                return unit_add_node_dependency(UNIT(s), s->what, UNIT_BINDS_TO, UNIT_DEPENDENCY_FILE);
 
-        if (is_device_path(p->what)) {
+        /* File based swap devices need to be ordered after systemd-remount-fs.service,
-                r = unit_add_node_dependency(UNIT(s), p->what, UNIT_REQUIRES, mask);
+         * since they might need a writable file system. */
-                if (r < 0)
+        return unit_add_dependency_by_name(UNIT(s), UNIT_AFTER, SPECIAL_REMOUNT_FS_SERVICE, true, UNIT_DEPENDENCY_FILE);
-                        return r;
-
-                return unit_add_blockdev_dependency(UNIT(s), p->what, mask);
-        }
-
-        /* File based swap devices need to be ordered after systemd-remount-fs.service, since they might need
-         * a writable file system. */
-        return unit_add_dependency_by_name(UNIT(s), UNIT_AFTER, SPECIAL_REMOUNT_FS_SERVICE, true, mask);
 }
 
 static int swap_add_default_dependencies(Swap *s) {

src/core/unit.c

@@ -3866,8 +3866,8 @@ int unit_deserialize_skip(FILE *f) {
 }
 
 int unit_add_node_dependency(Unit *u, const char *what, UnitDependency dep, UnitDependencyMask mask) {
-        _cleanup_free_ char *e = NULL;
         Unit *device;
+        _cleanup_free_ char *e = NULL;
         int r;
 
         assert(u);
@@ -3879,7 +3879,8 @@ int unit_add_node_dependency(Unit *u, const char *what, UnitDependency dep, Unit
         if (!is_device_path(what))
                 return 0;
 
-        /* When device units aren't supported (such as in a container), don't create dependencies on them. */
+        /* When device units aren't supported (such as in a
+         * container), don't create dependencies on them. */
         if (!unit_type_supported(UNIT_DEVICE))
                 return 0;
 
@@ -3899,33 +3900,6 @@ int unit_add_node_dependency(Unit *u, const char *what, UnitDependency dep, Unit
                                          device, true, mask);
 }
 
-int unit_add_blockdev_dependency(Unit *u, const char *what, UnitDependencyMask mask) {
-        _cleanup_free_ char *escaped = NULL, *target = NULL;
-        int r;
-
-        assert(u);
-
-        if (isempty(what))
-                return 0;
-
-        if (!path_startswith(what, "/dev/"))
-                return 0;
-
-        /* If we don't support devices, then also don't bother with blockdev@.target */
-        if (!unit_type_supported(UNIT_DEVICE))
-                return 0;
-
-        r = unit_name_path_escape(what, &escaped);
-        if (r < 0)
-                return r;
-
-        r = unit_name_build("blockdev", escaped, ".target", &target);
-        if (r < 0)
-                return r;
-
-        return unit_add_dependency_by_name(u, UNIT_AFTER, target, true, mask);
-}
-
 int unit_coldplug(Unit *u) {
         int r = 0, q;
         char **i;
@@ -5803,11 +5777,9 @@ bool unit_needs_console(Unit *u) {
         return exec_context_may_touch_console(ec);
 }
 
-const char *unit_label_path(const Unit *u) {
+const char *unit_label_path(Unit *u) {
         const char *p;
 
-        assert(u);
-
         /* Returns the file system path to use for MAC access decisions, i.e. the file to read the SELinux label off
          * when validating access checks. */
 

src/core/unit.h

@@ -743,7 +743,6 @@ int unit_deserialize(Unit *u, FILE *f, FDSet *fds);
 int unit_deserialize_skip(FILE *f);
 
 int unit_add_node_dependency(Unit *u, const char *what, UnitDependency d, UnitDependencyMask mask);
-int unit_add_blockdev_dependency(Unit *u, const char *what, UnitDependencyMask mask);
 
 int unit_coldplug(Unit *u);
 void unit_catchup(Unit *u);
@@ -842,7 +841,7 @@ int unit_warn_leftover_processes(Unit *u);
 
 bool unit_needs_console(Unit *u);
 
-const char *unit_label_path(const Unit *u);
+const char *unit_label_path(Unit *u);
 
 int unit_pid_attachable(Unit *unit, pid_t pid, sd_bus_error *error);
 

src/cryptsetup/cryptsetup-generator.c

@@ -99,14 +99,7 @@ static int split_keyspec(const char *keyspec, char **ret_keyfile, char **ret_key
         return 0;
 }
 
-static int generate_keydev_mount(
+static int generate_keydev_mount(const char *name, const char *keydev, const char *keydev_timeout, bool canfail, char **unit, char **mount) {
-                const char *name,
-                const char *keydev,
-                const char *keydev_timeout,
-                bool canfail,
-                char **unit,
-                char **mount) {
-
         _cleanup_free_ char *u = NULL, *where = NULL, *name_escaped = NULL, *device_unit = NULL;
         _cleanup_fclose_ FILE *f = NULL;
         int r;
@@ -230,8 +223,8 @@ static int create_disk(
                 const char *options) {
 
         _cleanup_free_ char *n = NULL, *d = NULL, *u = NULL, *e = NULL,
-                *keydev_mount = NULL, *keyfile_timeout_value = NULL,
+                *keydev_mount = NULL, *keyfile_timeout_value = NULL, *password_escaped = NULL,
-                *filtered = NULL, *u_escaped = NULL, *name_escaped = NULL, *header_path = NULL, *password_buffer = NULL;
+                *filtered = NULL, *u_escaped = NULL, *filtered_escaped = NULL, *name_escaped = NULL, *header_path = NULL;
         _cleanup_fclose_ FILE *f = NULL;
         const char *dmname;
         bool noauto, nofail, tmp, swap, netdev, attach_in_initrd;
@@ -292,29 +285,39 @@ static int create_disk(
         if (r < 0)
                 return r;
 
-        r = generator_write_cryptsetup_unit_section(f, arg_crypttab);
+        fprintf(f,
-        if (r < 0)
+                "[Unit]\n"
-                return r;
+                "Description=Cryptography Setup for %%I\n"
-
+                "Documentation=man:crypttab(5) man:systemd-cryptsetup-generator(8) man:systemd-cryptsetup@.service(8)\n"
-        if (netdev)
+                "SourcePath=%s\n"
-                fprintf(f, "After=remote-fs-pre.target\n");
+                "DefaultDependencies=no\n"
+                "IgnoreOnIsolate=true\n"
+                "After=%s\n",
+                arg_crypttab,
+                netdev ? "remote-fs-pre.target" : "cryptsetup-pre.target");
 
         /* If initrd takes care of attaching the disk then it should also detach it during shutdown. */
         if (!attach_in_initrd)
                 fprintf(f, "Conflicts=umount.target\n");
 
+        if (password) {
+                password_escaped = specifier_escape(password);
+                if (!password_escaped)
+                        return log_oom();
+        }
+
         if (keydev) {
-                _cleanup_free_ char *unit = NULL;
+                _cleanup_free_ char *unit = NULL, *p = NULL;
 
                 r = generate_keydev_mount(name, keydev, keyfile_timeout_value, keyfile_can_timeout > 0, &unit, &keydev_mount);
                 if (r < 0)
                         return log_error_errno(r, "Failed to generate keydev mount unit: %m");
 
-                password_buffer = path_join(keydev_mount, password);
+                p = path_join(keydev_mount, password_escaped);
-                if (!password_buffer)
+                if (!p)
                         return log_oom();
 
-                password = password_buffer;
+                free_and_replace(password_escaped, p);
 
                 fprintf(f, "After=%s\n", unit);
                 if (keyfile_can_timeout > 0)
@@ -341,13 +344,17 @@ static int create_disk(
                         return r;
         }
 
-        if (path_startswith(u, "/dev/"))
+        if (path_startswith(u, "/dev/")) {
                 fprintf(f,
                         "BindsTo=%s\n"
                         "After=%s\n"
                         "Before=umount.target\n",
                         d, d);
-        else
+
+                if (swap)
+                        fputs("Before=dev-mapper-%i.swap\n",
+                              f);
+        } else
                 /* For loopback devices, add systemd-tmpfiles-setup-dev.service
                    dependency to ensure that loopback support is available in
                    the kernel (/dev/loop-control needs to exist) */
@@ -361,9 +368,23 @@ static int create_disk(
         if (r < 0)
                 log_warning_errno(r, "Failed to write device timeout drop-in: %m");
 
-        r = generator_write_cryptsetup_service_section(f, name, u, password, filtered);
+        if (filtered) {
-        if (r < 0)
+                filtered_escaped = specifier_escape(filtered);
-                return r;
+                if (!filtered_escaped)
+                        return log_oom();
+        }
+
+        fprintf(f,
+                "\n[Service]\n"
+                "Type=oneshot\n"
+                "RemainAfterExit=yes\n"
+                "TimeoutSec=0\n" /* the binary handles timeouts anyway */
+                "KeyringMode=shared\n" /* make sure we can share cached keys among instances */
+                "OOMScoreAdjust=500\n" /* unlocking can allocate a lot of memory if Argon2 is used */
+                "ExecStart=" SYSTEMD_CRYPTSETUP_PATH " attach '%s' '%s' '%s' '%s'\n"
+                "ExecStop=" SYSTEMD_CRYPTSETUP_PATH " detach '%s'\n",
+                name_escaped, u_escaped, strempty(password_escaped), strempty(filtered_escaped),
+                name_escaped);
 
         if (tmp)
                 fprintf(f,

src/fstab-generator/fstab-generator.c

@@ -118,18 +118,11 @@ static int add_swap(
 
         fprintf(f,
                 "[Unit]\n"
-                "Documentation=man:fstab(5) man:systemd-fstab-generator(8)\n"
+                "SourcePath=%s\n"
-                "SourcePath=%s\n",
+                "Documentation=man:fstab(5) man:systemd-fstab-generator(8)\n\n"
+                "[Swap]\n",
                 fstab_path());
 
-        r = generator_write_blockdev_dependency(f, what);
-        if (r < 0)
-                return r;
-
-        fprintf(f,
-                "\n"
-                "[Swap]\n");
-
         r = write_what(f, what);
         if (r < 0)
                 return r;
@@ -181,13 +174,8 @@ static bool mount_in_initrd(struct mntent *me) {
                streq(me->mnt_dir, "/usr");
 }
 
-static int write_timeout(
+static int write_timeout(FILE *f, const char *where, const char *opts,
-                FILE *f,
+                         const char *filter, const char *variable) {
-                const char *where,
-                const char *opts,
-                const char *filter,
-                const char *variable) {
-
         _cleanup_free_ char *timeout = NULL;
         char timespan[FORMAT_TIMESPAN_MAX];
         usec_t u;
@@ -220,12 +208,8 @@ static int write_mount_timeout(FILE *f, const char *where, const char *opts) {
                              "x-systemd.mount-timeout\0", "TimeoutSec");
 }
 
-static int write_dependency(
+static int write_dependency(FILE *f, const char *opts,
-                FILE *f,
+                const char *filter, const char *format) {
-                const char *opts,
-                const char *filter,
-                const char *format) {
-
         _cleanup_strv_free_ char **names = NULL, **units = NULL;
         _cleanup_free_ char *res = NULL;
         char **s;
@@ -246,7 +230,6 @@ static int write_dependency(
                 r = unit_name_mangle_with_suffix(*s, "as dependency", 0, ".mount", &x);
                 if (r < 0)
                         return log_error_errno(r, "Failed to generate unit name: %m");
-
                 r = strv_consume(&units, x);
                 if (r < 0)
                         return log_oom();
@@ -266,8 +249,7 @@ static int write_dependency(
 }
 
 static int write_after(FILE *f, const char *opts) {
-        return write_dependency(f, opts,
+        return write_dependency(f, opts, "x-systemd.after", "After=%1$s\n");
-                                "x-systemd.after", "After=%1$s\n");
 }
 
 static int write_requires_after(FILE *f, const char *opts) {
@@ -381,8 +363,8 @@ static int add_mount(
 
         fprintf(f,
                 "[Unit]\n"
-                "Documentation=man:fstab(5) man:systemd-fstab-generator(8)\n"
+                "SourcePath=%s\n"
-                "SourcePath=%s\n",
+                "Documentation=man:fstab(5) man:systemd-fstab-generator(8)\n",
                 source);
 
         /* All mounts under /sysroot need to happen later, at initrd-fs.target time. IOW, it's not
@@ -429,14 +411,7 @@ static int add_mount(
                         return r;
         }
 
-        r = generator_write_blockdev_dependency(f, what);
+        fprintf(f, "\n[Mount]\n");
-        if (r < 0)
-                return r;
-
-        fprintf(f,
-                "\n"
-                "[Mount]\n");
-
         if (original_where)
                 fprintf(f, "# Canonicalized from %s\n", original_where);
 

src/gpt-auto-generator/gpt-auto-generator.c

@@ -105,8 +105,9 @@ static int open_parent_block_device(dev_t devnum, int *ret_fd) {
 }
 
 static int add_cryptsetup(const char *id, const char *what, bool rw, bool require, char **device) {
-        _cleanup_free_ char *e = NULL, *n = NULL, *d = NULL;
+        _cleanup_free_ char *e = NULL, *n = NULL, *d = NULL, *id_escaped = NULL, *what_escaped = NULL;
         _cleanup_fclose_ FILE *f = NULL;
+        const char *p;
         int r;
 
         assert(id);
@@ -124,28 +125,44 @@ static int add_cryptsetup(const char *id, const char *what, bool rw, bool requir
         if (r < 0)
                 return log_error_errno(r, "Failed to generate unit name: %m");
 
-        r = generator_open_unit_file(arg_dest, NULL, n, &f);
+        id_escaped = specifier_escape(id);
-        if (r < 0)
+        if (!id_escaped)
-                return r;
+                return log_oom();
 
-        r = generator_write_cryptsetup_unit_section(f, NULL);
+        what_escaped = specifier_escape(what);
-        if (r < 0)
+        if (!what_escaped)
-                return r;
+                return log_oom();
+
+        p = prefix_roota(arg_dest, n);
+        f = fopen(p, "wxe");
+        if (!f)
+                return log_error_errno(errno, "Failed to create unit file %s: %m", p);
 
         fprintf(f,
-                "Before=umount.target cryptsetup.target\n"
+                "# Automatically generated by systemd-gpt-auto-generator\n\n"
+                "[Unit]\n"
+                "Description=Cryptography Setup for %%I\n"
+                "Documentation=man:systemd-gpt-auto-generator(8) man:systemd-cryptsetup@.service(8)\n"
+                "DefaultDependencies=no\n"
                 "Conflicts=umount.target\n"
-                "BindsTo=%s\n"
+                "BindsTo=dev-mapper-%%i.device %s\n"
-                "After=%s\n",
+                "Before=umount.target cryptsetup.target\n"
-                d, d);
+                "After=%s\n"
-
+                "IgnoreOnIsolate=true\n"
-        r = generator_write_cryptsetup_service_section(f, id, what, NULL, rw ? NULL : "read-only");
+                "[Service]\n"
-        if (r < 0)
+                "Type=oneshot\n"
-                return r;
+                "RemainAfterExit=yes\n"
+                "TimeoutSec=0\n" /* the binary handles timeouts anyway */
+                "KeyringMode=shared\n" /* make sure we can share cached keys among instances */
+                "ExecStart=" SYSTEMD_CRYPTSETUP_PATH " attach '%s' '%s' '' '%s'\n"
+                "ExecStop=" SYSTEMD_CRYPTSETUP_PATH " detach '%s'\n",
+                d, d,
+                id_escaped, what_escaped, rw ? "" : "read-only",
+                id_escaped);
 
         r = fflush_and_check(f);
         if (r < 0)
-                return log_error_errno(r, "Failed to write file %s: %m", n);
+                return log_error_errno(r, "Failed to write file %s: %m", p);
 
         r = generator_add_symlink(arg_dest, d, "wants", n);
         if (r < 0)
@@ -210,6 +227,7 @@ static int add_mount(
         log_debug("Adding %s: %s fstype=%s", where, what, fstype ?: "(any)");
 
         if (streq_ptr(fstype, "crypto_LUKS")) {
+
                 r = add_cryptsetup(id, what, rw, true, &crypto_what);
                 if (r < 0)
                         return r;
@@ -244,10 +262,6 @@ static int add_mount(
         if (r < 0)
                 return r;
 
-        r = generator_write_blockdev_dependency(f, what);
-        if (r < 0)
-                return r;
-
         fprintf(f,
                 "\n"
                 "[Mount]\n"
@@ -356,14 +370,7 @@ static int add_swap(const char *path) {
                 "# Automatically generated by systemd-gpt-auto-generator\n\n"
                 "[Unit]\n"
                 "Description=Swap Partition\n"
-                "Documentation=man:systemd-gpt-auto-generator(8)\n");
+                "Documentation=man:systemd-gpt-auto-generator(8)\n\n"
-
-        r = generator_write_blockdev_dependency(f, path);
-        if (r < 0)
-                return r;
-
-        fprintf(f,
-                "\n"
                 "[Swap]\n"
                 "What=%s\n",
                 path);

src/network/networkd-link.c

@@ -1514,10 +1514,6 @@ static int link_acquire_ipv6_conf(Link *link) {
 
                 log_link_debug(link, "Starting IPv6 Router Advertisements");
 
-                r = radv_emit_dns(link);
-                if (r < 0)
-                        return log_link_warning_errno(link, r, "Failed to configure DNS or Domains in IPv6 Router Advertisement: %m");
-
                 r = sd_radv_start(link->radv);
                 if (r < 0 && r != -EBUSY)
                         return log_link_warning_errno(link, r, "Could not start IPv6 Router Advertisement: %m");

src/network/networkd-radv.c

@@ -443,29 +443,20 @@ static int radv_get_ip6dns(Network *network, struct in6_addr **dns,
 
 static int radv_set_dns(Link *link, Link *uplink) {
         _cleanup_free_ struct in6_addr *dns = NULL;
-        usec_t lifetime_usec;
         size_t n_dns;
+        usec_t lifetime_usec;
         int r;
 
         if (!link->network->router_emit_dns)
                 return 0;
 
         if (link->network->router_dns) {
-                struct in6_addr *p;
+                dns = newdup(struct in6_addr, link->network->router_dns,
-
+                             link->network->n_router_dns);
-                dns = new(struct in6_addr, link->network->n_router_dns);
                 if (!dns)
                         return -ENOMEM;
 
-                p = dns;
+                n_dns = link->network->n_router_dns;
-                for (size_t i = 0; i < link->network->n_router_dns; i++)
-                        if (IN6_IS_ADDR_UNSPECIFIED(&link->network->router_dns[i])) {
-                                if (!IN6_IS_ADDR_UNSPECIFIED(&link->ipv6ll_address))
-                                        *(p++) = link->ipv6ll_address;
-                        } else
-                                *(p++) = link->network->router_dns[i];
-
-                n_dns = p - dns;
                 lifetime_usec = link->network->router_dns_lifetime_usec;
 
                 goto set_dns;
@@ -629,7 +620,7 @@ int radv_configure(Link *link) {
 
         }
 
-        return 0;
+        return radv_emit_dns(link);
 }
 
 int config_parse_radv_dns(
@@ -667,30 +658,19 @@ int config_parse_radv_dns(
                 if (r == 0)
                         break;
 
-                if (streq(w, "_link_local"))
+                if (in_addr_from_string(AF_INET6, w, &a) >= 0) {
-                        a = IN_ADDR_NULL;
+                        struct in6_addr *m;
-                else {
-                        r = in_addr_from_string(AF_INET6, w, &a);
-                        if (r < 0) {
-                                log_syntax(unit, LOG_ERR, filename, line, r,
-                                           "Failed to parse DNS server address, ignoring: %s", w);
-                                continue;
-                        }
 
-                        if (in_addr_is_null(AF_INET6, &a)) {
+                        m = reallocarray(n->router_dns, n->n_router_dns + 1, sizeof(struct in6_addr));
-                                log_syntax(unit, LOG_ERR, filename, line, 0,
+                        if (!m)
-                                           "DNS server address is null, ignoring: %s", w);
+                                return log_oom();
-                                continue;
-                        }
-                }
 
-                struct in6_addr *m;
+                        m[n->n_router_dns++] = a.in6;
-                m = reallocarray(n->router_dns, n->n_router_dns + 1, sizeof(struct in6_addr));
+                        n->router_dns = m;
-                if (!m)
-                        return log_oom();
 
-                m[n->n_router_dns++] = a.in6;
+                } else
-                n->router_dns = m;
+                        log_syntax(unit, LOG_ERR, filename, line, 0,
+                                   "Failed to parse DNS server address, ignoring: %s", w);
         }
 
         return 0;

src/shared/generator.c

@@ -519,103 +519,6 @@ int generator_enable_remount_fs_service(const char *dir) {
                                      SYSTEM_DATA_UNIT_PATH "/" SPECIAL_REMOUNT_FS_SERVICE);
 }
 
-int generator_write_blockdev_dependency(
-                FILE *f,
-                const char *what) {
-
-        _cleanup_free_ char *escaped = NULL;
-        int r;
-
-        assert(f);
-        assert(what);
-
-        if (!path_startswith(what, "/dev/"))
-                return 0;
-
-        r = unit_name_path_escape(what, &escaped);
-        if (r < 0)
-                return log_error_errno(r, "Failed to escape device node path %s: %m", what);
-
-        fprintf(f,
-                "After=blockdev@%s.target\n",
-                escaped);
-
-        return 0;
-}
-
-int generator_write_cryptsetup_unit_section(
-                FILE *f,
-                const char *source) {
-
-        assert(f);
-
-        fprintf(f,
-                "[Unit]\n"
-                "Description=Cryptography Setup for %%I\n"
-                "Documentation=man:crypttab(5) man:systemd-cryptsetup-generator(8) man:systemd-cryptsetup@.service(8)\n");
-
-        if (source)
-                fprintf(f, "SourcePath=%s\n", source);
-
-        fprintf(f,
-                "DefaultDependencies=no\n"
-                "IgnoreOnIsolate=true\n"
-                "After=cryptsetup-pre.target\n"
-                "Before=blockdev@dev-mapper-%%i.target\n"
-                "Wants=blockdev@dev-mapper-%%i.target\n");
-
-        return 0;
-}
-
-int generator_write_cryptsetup_service_section(
-                FILE *f,
-                const char *name,
-                const char *what,
-                const char *password,
-                const char *options) {
-
-        _cleanup_free_ char *name_escaped = NULL, *what_escaped = NULL, *password_escaped = NULL, *options_escaped = NULL;
-
-        assert(f);
-        assert(name);
-        assert(what);
-
-        name_escaped = specifier_escape(name);
-        if (!name_escaped)
-                return log_oom();
-
-        what_escaped = specifier_escape(what);
-        if (!what_escaped)
-                return log_oom();
-
-        if (password) {
-                password_escaped = specifier_escape(password);
-                if (!password_escaped)
-                        return log_oom();
-        }
-
-        if (options) {
-                options_escaped = specifier_escape(options);
-                if (!options_escaped)
-                        return log_oom();
-        }
-
-        fprintf(f,
-                "\n"
-                "[Service]\n"
-                "Type=oneshot\n"
-                "RemainAfterExit=yes\n"
-                "TimeoutSec=0\n"          /* The binary handles timeouts on its own */
-                "KeyringMode=shared\n"    /* Make sure we can share cached keys among instances */
-                "OOMScoreAdjust=500\n"    /* Unlocking can allocate a lot of memory if Argon2 is used */
-                "ExecStart=" SYSTEMD_CRYPTSETUP_PATH " attach '%s' '%s' '%s' '%s'\n"
-                "ExecStop=" SYSTEMD_CRYPTSETUP_PATH " detach '%s'\n",
-                name_escaped, what_escaped, strempty(password_escaped), strempty(options_escaped),
-                name_escaped);
-
-        return 0;
-}
-
 void log_setup_generator(void) {
         log_set_prohibit_ipc(true);
         log_setup_service();

src/shared/generator.h

@@ -27,21 +27,6 @@ int generator_write_timeouts(
         const char *opts,
         char **filtered);
 
-int generator_write_blockdev_dependency(
-                FILE *f,
-                const char *what);
-
-int generator_write_cryptsetup_unit_section(
-                FILE *f,
-                const char *source);
-
-int generator_write_cryptsetup_service_section(
-                FILE *f,
-                const char *name,
-                const char *what,
-                const char *password,
-                const char *options);
-
 int generator_write_device_deps(
         const char *dir,
         const char *what,

test/test-network/conf/ipv6-prefix.network

@@ -4,10 +4,6 @@ Name=veth-peer
 [Network]
 IPv6PrefixDelegation=yes
 
-[IPv6PrefixDelegation]
-DNS=_link_local 2002:da8:1:0::1
-DNSLifetimeSec=1min
-
 [IPv6Prefix]
 Prefix=2002:da8:1:0::/64
 PreferredLifetimeSec=1000s

test/test-network/systemd-networkd-tests.py

@@ -2646,11 +2646,6 @@ class NetworkdRATests(unittest.TestCase, Utilities):
         start_networkd()
         self.wait_online(['veth99:routable', 'veth-peer:degraded'])
 
-        output = check_output(*resolvectl_cmd, 'dns', 'veth99', env=env)
-        print(output)
-        self.assertRegex(output, 'fe80::')
-        self.assertRegex(output, '2002:da8:1::1')
-
         output = check_output(*networkctl_cmd, '-n', '0', 'status', 'veth99', env=env)
         print(output)
         self.assertRegex(output, '2002:da8:1:0')

units/blockdev@.target

@@ -1,13 +0,0 @@
-#  SPDX-License-Identifier: LGPL-2.1+
-#
-#  This file is part of systemd.
-#
-#  systemd is free software; you can redistribute it and/or modify it
-#  under the terms of the GNU Lesser General Public License as published by
-#  the Free Software Foundation; either version 2.1 of the License, or
-#  (at your option) any later version.
-
-[Unit]
-Description=Block Device Preparation for %f
-Documentation=man:systemd.special(7)
-StopWhenUnneeded=yes

units/meson.build

@@ -2,7 +2,6 @@
 
 units = [
         ['basic.target',                        ''],
-        ['blockdev@.target',                    ''],
         ['bluetooth.target',                    ''],
         ['boot-complete.target',                ''],
         ['cryptsetup-pre.target',               'HAVE_LIBCRYPTSETUP'],