Merge pull request #16344 from keszybz/update-utmp-erofs

Make update-utmp not fail if it only fails to write wtmp records

docs/USER_RECORD.md

@@ -628,7 +628,7 @@ hash to test this derived secret key against for authentication. It is
 generally recommended that for each entry in `fido2HmacSalt` there's also a
 matching one in `fido2HmacCredential`, and vice versa, with the same credential
 ID, appearing in the same order, but this should not be required by
-applications processing user recrods.
+applications processing user records.
 
 ## Fields in the `perMachine` section
 

hwdb.d/70-mouse.hwdb

@@ -381,6 +381,10 @@ mouse:usb:v046dp101b:name:Logitech M705:
 mouse:usb:v046dpc52b:name:Logitech Unifying Device. Wireless PID:101b:
  MOUSE_DPI=1000@125
 
+# Logitech M705 (newer version?)
+mouse:usb:v046dp406d:name:Logitech M705:
+ MOUSE_DPI=1000@167
+
 # Logitech M305 Wireless Optical Mouse
 mouse:usb:v046dpc52f:name:Logitech USB Receiver:
  MOUSE_DPI=1000@170

man/coredump.conf.xml

@@ -49,7 +49,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[Coredump]</literal> section:</para>
+    [Coredump] section:</para>
 
     <variablelist class='config-directives'>
 

man/coredumpctl.xml

@@ -52,8 +52,8 @@
         matching specified characteristics. If no command is
         specified, this is the implied default.</para>
 
-        <para>The output is designed to be human readable and contains list contains
-        a table with the following columns:</para>
+        <para>The output is designed to be human readable and contains a table with the following
+        columns:</para>
         <variablelist>
           <varlistentry>
             <term>TIME</term>

man/crypttab.xml

@@ -255,6 +255,7 @@
 
         <listitem><para>Perform encryption using the same cpu that IO was submitted on. The default is to use
         an unbound workqueue so that encryption work is automatically balanced between available CPUs.</para>
+
         <para>This requires kernel 4.0 or newer.</para>
         </listitem>
       </varlistentry>
@@ -263,9 +264,10 @@
         <term><option>submit-from-crypt-cpus</option></term>
 
         <listitem><para>Disable offloading writes to a separate thread after encryption. There are some
-        situations where offloading write bios from the encryption threads to a single thread degrades
-        performance significantly. The default is to offload write bios to the same thread because it benefits
-        CFQ to have writes submitted using the same context.</para>
+        situations where offloading write requests from the encryption threads to a dedicated thread degrades
+        performance significantly. The default is to offload write requests to a dedicated thread because it
+        benefits the CFQ scheduler to have writes submitted using the same context.</para>
+
         <para>This requires kernel 4.0 or newer.</para>
         </listitem>
       </varlistentry>
@@ -512,7 +514,8 @@ external   /dev/sda3       keyfile:LABEL=keydev keyfile-timeout=10s</programlist
 
       <para>The PKCS#11 logic allows hooking up any compatible security token that is capable of storing RSA
       decryption keys. Here's an example how to set up a Yubikey security token for this purpose, using
-      <command>ykman</command> from the yubikey-manager project:</para>
+      <citerefentry project='debian'><refentrytitle>ykmap</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+      from the yubikey-manager project:</para>
 
 <programlisting><xi:include href="yubikey-crypttab.sh" parse="text" /></programlisting>
 

man/daemon.xml

@@ -357,7 +357,7 @@
       special target unit <filename>sockets.target</filename>. It is
       recommended to place a
       <varname>WantedBy=sockets.target</varname> directive in the
-      <literal>[Install]</literal> section to automatically add such a
+      [Install] section to automatically add such a
       dependency on installation of a socket unit. Unless
       <varname>DefaultDependencies=no</varname> is set, the necessary
       ordering dependencies are implicitly created for all socket
@@ -520,7 +520,7 @@
         operating system-independent.</para></listitem>
 
         <listitem><para>Make sure to include an
-        <literal>[Install]</literal> section including installation
+        [Install] section including installation
         information for the unit file. See
         <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         for details. To activate your service on boot, make sure to

man/file-hierarchy.xml

@@ -648,7 +648,7 @@
     <filename>/usr/share/</filename> hierarchy to the locations
     defined by the various relevant specifications.</para>
 
-    <para>During runtime, and for local configuration and state,
+    <para>During runtime, and for local configuration and runtime state,
     additional directories are defined:</para>
 
     <table>

man/homectl.xml

@@ -119,9 +119,9 @@
         <term><option>--identity=</option><replaceable>FILE</replaceable></term>
 
         <listitem><para>Read the user's JSON record from the specified file. If passed as
-        <literal>-</literal> reads the user record from standard input. The supplied JSON object must follow
-        the structure documented on <ulink url="https://systemd.io/USER_RECORDS">JSON User
-        Records</ulink>. This option may be used in conjunction with the <command>create</command> and
+        <literal>-</literal> read the user record from standard input. The supplied JSON object must follow
+        the structure documented on <ulink url="https://systemd.io/USER_RECORD">JSON User Records</ulink>.
+        This option may be used in conjunction with the <command>create</command> and
         <command>update</command> commands (see below), where it allows configuring the user record in JSON
         as-is, instead of setting the individual user record properties (see below).</para></listitem>
       </varlistentry>
@@ -247,10 +247,9 @@
         different system and the configured UID is taken by another user there, then
         <command>systemd-homed</command> may assign the user a different UID on that system. The specified
         UID must be outside of the system user range. It is recommended to use the 60001…60513 UID range for
-        this purpose. If not specified the UID is automatically picked. When logging in and the home
-        directory is found to be owned by a UID not matching the user's assigned one the home directory and
-        all files and directories inside it will have their ownership changed automatically before login
-        completes.</para>
+        this purpose. If not specified, the UID is automatically picked. If the home directory is found to be
+        owned by a different UID when logging in, the home directory and everything underneath it will have
+        its ownership changed automatically before login completes.</para>
 
         <para>Note that users managed by <command>systemd-homed</command> always have a matching group
         associated with the same name as well as a GID matching the UID of the user. Thus, configuring the
@@ -266,19 +265,19 @@
         privileges. Note that <command>systemd-homed</command> does not manage any groups besides a group
         matching the user in name and numeric UID/GID. Thus any groups listed here must be registered
         independently, for example with <citerefentry
-        project='man-pages'><refentrytitle>groupadd</refentrytitle><manvolnum>8</manvolnum></citerefentry>. If
-        non-existent groups that are listed there are ignored. This option may be used more than once, in
-        which case all specified group lists are combined. If the user is currently a member of a group
-        which is not listed, the user will be removed from the group.</para></listitem>
+        project='man-pages'><refentrytitle>groupadd</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
+        Any non-existent groups are ignored. This option may be used more than once, in which case all
+        specified group lists are combined. If the user is currently a member of a group which is not listed,
+        the user will be removed from the group.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><option>--skel=</option><replaceable>PATH</replaceable></term>
 
         <listitem><para>Takes a file system path to a directory. Specifies the skeleton directory to
-        initialize the home directory with. All files and directories in the specified are copied into any
-        newly create home directory. If not specified defaults to
-        <filename>/etc/skel/</filename>.</para></listitem>
+        initialize the home directory with. All files and directories in the specified path are copied into
+        any newly create home directory. If not specified defaults to <filename>/etc/skel/</filename>.
+        </para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -313,7 +312,7 @@
         <listitem><para>Takes a specifier indicating the preferred language of the user. The
         <varname>$LANG</varname> environment variable is initialized from this value on login, and thus a
         value suitable for this environment variable is accepted here, for example
-        <option>--language=de_DE.UTF8</option></para></listitem>
+        <option>--language=de_DE.UTF8</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -331,8 +330,8 @@
         security token with exactly one pair of X.509 certificate and private key. A random secret key is
         then generated, encrypted with the public key of the X.509 certificate, and stored as part of the
         user record. At login time it is decrypted with the PKCS#11 module and then used to unlock the
-        account and associated resources. See below for an example how to set up authentication with security
-        token.</para>
+        account and associated resources. See below for an example how to set up authentication with a
+        security token.</para>
 
         <para>Instead of a valid PKCS#11 URI, the special strings <literal>list</literal> and
         <literal>auto</literal> may be specified. If <literal>list</literal> is passed, a brief table of
@@ -439,19 +438,19 @@
         <listitem><para>Each of these options takes a time span specification as argument (in the syntax
         documented in
         <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>5</manvolnum></citerefentry>) and
-        configure various aspects of the user's password expiration policy. Specifically,
+        configures various aspects of the user's password expiration policy. Specifically,
         <option>--password-change-min=</option> configures how much time has to pass after changing the
         password of the user until the password may be changed again. If the user tries to change their
         password before this time passes the attempt is refused. <option>--password-change-max=</option>
-        configures how much time has to pass after the password is changed until the password expires and
-        needs to be changed again. After this time passes any attempts to log in may only proceed after the
-        password is changed. <option>--password-change-warn=</option> specifies how much earlier than then
-        the time configured with <option>--password-change-max=</option> the user is warned at login to
-        change their password as it will expire soon. Finally <option>--password-change-inactive=</option>
-        configures the time which has to pass after the password as expired until the user is not permitted
-        to log in or change the password anymore. Note that these options only apply to password
-        authentication, and do not apply to other forms of authentication, for example PKCS#11-based security
-        token authentication.</para></listitem>
+        configures how soon after it has been changed the password expires and needs to be changed again.
+        After this time passes logging in may only proceed after the password is changed.
+        <option>--password-change-warn=</option> specifies how much earlier than then the time configured
+        with <option>--password-change-max=</option> the user is warned at login to change their password as
+        it will expire soon. Finally <option>--password-change-inactive=</option> configures the time which
+        has to pass after the password as expired until the user is not permitted to log in or change the
+        password anymore. Note that these options only apply to password authentication, and do not apply to
+        other forms of authentication, for example PKCS#11-based security token
+        authentication.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -695,8 +694,8 @@
         <para>Activation of a home directory involves various operations that depend on the selected storage
         mechanism. If the LUKS2 mechanism is used, this generally involves: inquiring the user for a
         password, setting up a loopback device, validating and activating the LUKS2 volume, checking the file
-        system, mounting the file system, and potentiatlly changing the ownership of all included files to
-        the correct UID/GID.</para></listitem>
+        system, mounting the file system, and potentially changing the ownership of all included files to the
+        correct UID/GID.</para></listitem>
       </varlistentry>
 
       <varlistentry>

man/homed.conf.xml

@@ -42,7 +42,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>The following options are available in the <literal>[Home]</literal> section:</para>
+    <para>The following options are available in the [Home] section:</para>
 
     <variablelist class='home-directives'>
 

man/journal-remote.conf.xml

@@ -49,7 +49,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[Remote]</literal> section:</para>
+    [Remote] section:</para>
 
     <variablelist class='config-directives'>
       <varlistentry>

man/journal-upload.conf.xml

@@ -43,7 +43,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>All options are configured in the <literal>[Upload]</literal> section:</para>
+    <para>All options are configured in the [Upload] section:</para>
 
     <variablelist class='config-directives'>
       <varlistentry>

man/journalctl.xml

@@ -555,7 +555,7 @@
         is also added for <literal>_SYSTEMD_SLICE=<replaceable>UNIT</replaceable></literal>,
         such that if the provided <replaceable>UNIT</replaceable> is a
         <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>
-        unit, all logs of the children of the slice will be logged.
+        unit, all logs of children of the slice will be shown.
        </para>
 
         <para>This parameter can be specified multiple times.</para>
@@ -574,7 +574,7 @@
         is also added for <literal>_SYSTEMD_USER_SLICE=<replaceable>UNIT</replaceable></literal>,
         such that if the provided <replaceable>UNIT</replaceable> is a
         <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>
-        unit, all logs of the children of the unit will be logged.</para>
+        unit, all logs of children of the unit will be shown.</para>
 
         <para>This parameter can be specified multiple times.</para>
         </listitem>
@@ -761,8 +761,8 @@
         underneath the specified directory instead of the root
         directory (e.g. <option>--update-catalog</option> will create
         <filename><replaceable>ROOT</replaceable>/var/lib/systemd/catalog/database</filename>,
-        and journal files under <filename><replaceable>ROOT</replaceable>/run/journal</filename>
-        or <filename><replaceable>ROOT</replaceable>/var/log/journal</filename> will be displayed).
+        and journal files under <filename><replaceable>ROOT</replaceable>/run/journal/</filename>
+        or <filename><replaceable>ROOT</replaceable>/var/log/journal/</filename> will be displayed).
         </para></listitem>
       </varlistentry>
 
@@ -929,10 +929,10 @@
         <filename>/run/log/journal/</filename> into <filename>/var/log/journal/</filename>, if persistent
         storage is enabled. This call does not return until the operation is complete. Note that this call is
         idempotent: the data is only flushed from <filename>/run/log/journal/</filename> into
-        <filename>/var/log/journal</filename> once during system runtime (but see
+        <filename>/var/log/journal/</filename> once during system runtime (but see
         <option>--relinquish-var</option> below), and this command exits cleanly without executing any
         operation if this has already happened. This command effectively guarantees that all data is flushed
-        to <filename>/var/log/journal</filename> at the time it returns.</para></listitem>
+        to <filename>/var/log/journal/</filename> at the time it returns.</para></listitem>
       </varlistentry>
 
       <varlistentry>

man/journald.conf.xml

@@ -53,7 +53,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[Journal]</literal> section:</para>
+    [Journal] section:</para>
 
     <variablelist class='config-directives'>
 

man/kernel-install.xml

@@ -36,7 +36,7 @@
     <title>Description</title>
     <para><command>kernel-install</command> is used to install and remove kernel and initramfs images to and
     from the boot loader partition, referred to as <varname>$BOOT</varname> here. It will usually be one of
-    <filename>/boot</filename>, <filename>/efi</filename>, or <filename>/boot/efi</filename>, see below.
+    <filename>/boot/</filename>, <filename>/efi/</filename>, or <filename>/boot/efi/</filename>, see below.
     </para>
 
     <para><command>kernel-install</command> will execute the files
@@ -137,7 +137,7 @@
     <para>The partition where the kernels and <ulink url="https://systemd.io/BOOT_LOADER_SPECIFICATION">Boot
     Loader Specification</ulink> snippets are located is called <varname>$BOOT</varname>.
     <command>kernel-install</command> determines the location of this partition by checking
-    <filename>/efi/</filename>, <filename>/boot/</filename>, and <filename>/boot/efi</filename>
+    <filename>/efi/</filename>, <filename>/boot/</filename>, and <filename>/boot/efi/</filename>
     in turn. The first location where <filename>$BOOT/loader/entries/</filename> or
     <filename>$BOOT/$MACHINE_ID/</filename> exists is used.</para>
   </refsect1>

man/logind.conf.xml

@@ -46,7 +46,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[Login]</literal> section:</para>
+    [Login] section:</para>
 
     <variablelist class='config-directives'>
 
@@ -277,7 +277,7 @@
       <varlistentry>
         <term><varname>HoldoffTimeoutSec=</varname></term>
 
-        <listitem><para>Specifies the timeout after system startup or
+        <listitem><para>Specifies a period of time after system startup or
         system resume in which systemd will hold off on reacting to
         lid events. This is required for the system to properly
         detect any hotplugged devices so systemd can ignore lid events

man/machine-id.xml

@@ -39,7 +39,7 @@
 
     <para>The machine ID may be set, for example when network booting, with the
     <varname>systemd.machine_id=</varname> kernel command line parameter or by passing the
-    option <option>--machine-id=</option> to systemd. An ID is specified in this manner
+    option <option>--machine-id=</option> to systemd. An ID specified in this manner
     has higher priority and will be used instead of the ID stored in
     <filename>/etc/machine-id</filename>.</para>
 

man/machinectl.xml

@@ -320,7 +320,7 @@
 
         <listitem><para>Copies files or directories from a container
         into the host system. Takes a container name, followed by the
-        source path in the container the destination path on the host.
+        source path in the container and the destination path on the host.
         If the destination path is omitted, the same as the source path
         is used.</para>
 

man/networkd.conf.xml

@@ -45,7 +45,7 @@
   <refsect1>
     <title>[Network] Section Options</title>
 
-    <para>The following options are available in the <literal>[Network]</literal> section:</para>
+    <para>The following options are available in the [Network] section:</para>
 
     <variablelist class='network-directives'>
       <varlistentry>

man/nss-myhostname.xml

@@ -18,8 +18,7 @@
   <refnamediv>
     <refname>nss-myhostname</refname>
     <refname>libnss_myhostname.so.2</refname>
-    <refpurpose>Provide hostname resolution for the locally
-    configured system hostname.</refpurpose>
+    <refpurpose>Hostname resolution for the locally configured system hostname</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/nss-mymachines.xml

@@ -18,8 +18,7 @@
   <refnamediv>
     <refname>nss-mymachines</refname>
     <refname>libnss_mymachines.so.2</refname>
-    <refpurpose>Provide hostname resolution for local
-    container instances.</refpurpose>
+    <refpurpose>Hostname resolution for local container instances</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/nss-resolve.xml

@@ -18,7 +18,7 @@
   <refnamediv>
     <refname>nss-resolve</refname>
     <refname>libnss_resolve.so.2</refname>
-    <refpurpose>Provide hostname resolution via <filename>systemd-resolved.service</filename></refpurpose>
+    <refpurpose>Hostname resolution via <filename>systemd-resolved.service</filename></refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/nss-systemd.xml

@@ -18,7 +18,7 @@
   <refnamediv>
     <refname>nss-systemd</refname>
     <refname>libnss_systemd.so.2</refname>
-    <refpurpose>Provide UNIX user and group name resolution for user/group lookup via Varlink</refpurpose>
+    <refpurpose>UNIX user and group name resolution for user/group lookup via Varlink</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/pam_systemd.xml

@@ -153,7 +153,7 @@
         hence be used to uniquely label files or other resources of this session. Combine this ID with the boot
         identifier, as returned by
         <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry>, for a
-        globally unique identifier for the current session.</para></listitem>
+        globally unique identifier.</para></listitem>
       </varlistentry>
 
       <varlistentry>

man/portablectl.xml

@@ -118,7 +118,7 @@
 
         <para>By default all unit files whose names start with a prefix generated from the image's file name are copied
         out. Specifically, the prefix is determined from the image file name with any suffix such as
-        <filename>.raw</filename> removed, truncated at the first occurrence of and underscore character
+        <filename>.raw</filename> removed, truncated at the first occurrence of an underscore character
         (<literal>_</literal>), if there is one. The underscore logic is supposed to be used to versioning so that the
         an image file <filename>foobar_47.11.raw</filename> will result in a unit file matching prefix of
         <filename>foobar</filename>. This prefix is then compared with all unit files names contained in the image in
@@ -403,7 +403,7 @@
       </tgroup>
     </table>
 
-    <para>For details on this profiles, and their effects please have a look at their precise definitions,
+    <para>For details on these profiles and their effects see their precise definitions,
     e.g. <filename>/usr/lib/systemd/portable/profile/default/service.conf</filename> and similar.</para>
   </refsect1>
 

man/pstore.conf.xml

@@ -44,7 +44,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[PStore]</literal> section:</para>
+    [PStore] section:</para>
 
     <variablelist class='config-directives'>
 
@@ -82,7 +82,7 @@
   <refsect1>
     <title>See Also</title>
     <para>
-      <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
     </para>
   </refsect1>
 

man/resolved.conf.xml

@@ -41,7 +41,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>The following options are available in the <literal>[Resolve]</literal> section:</para>
+    <para>The following options are available in the [Resolve] section:</para>
 
     <variablelist class='network-directives'>
 

man/sd_bus_enqueue_for_read.xml

@@ -19,7 +19,7 @@
   <refnamediv>
     <refname>sd_bus_enqueue_for_read</refname>
 
-    <refpurpose>Re-enqueue a bus message on a bus connection, for reading.</refpurpose>
+    <refpurpose>Re-enqueue a bus message on a bus connection, for reading</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_bus_is_open.xml

@@ -20,7 +20,7 @@
     <refname>sd_bus_is_open</refname>
     <refname>sd_bus_is_ready</refname>
 
-    <refpurpose>Check whether the a bus connection is open or ready.</refpurpose>
+    <refpurpose>Check whether the bus connection is open or ready</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_bus_message_new_method_error.xml

@@ -22,7 +22,7 @@
     <refname>sd_bus_message_new_method_errno</refname>
     <refname>sd_bus_message_new_method_errnof</refname>
 
-    <refpurpose>Create a an error reply for a method call</refpurpose>
+    <refpurpose>Create an error reply for a method call</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_bus_set_connected_signal.xml

@@ -20,7 +20,7 @@
     <refname>sd_bus_set_connected_signal</refname>
     <refname>sd_bus_get_connected_signal</refname>
 
-    <refpurpose>Control emmission of local connection establishment signal on bus connections</refpurpose>
+    <refpurpose>Control emission of local connection establishment signal on bus connections</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_bus_slot_set_destroy_callback.xml

@@ -23,7 +23,7 @@
     <refname>sd_bus_track_get_destroy_callback</refname>
     <refname>sd_bus_destroy_t</refname>
 
-    <refpurpose>Define the callback function for resource cleanup.</refpurpose>
+    <refpurpose>Define the callback function for resource cleanup</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_bus_slot_set_floating.xml

@@ -19,7 +19,7 @@
     <refname>sd_bus_slot_set_floating</refname>
     <refname>sd_bus_slot_get_floating</refname>
 
-    <refpurpose>Control whether a bus slot object is "floating".</refpurpose>
+    <refpurpose>Control whether a bus slot object is "floating"</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_event_source_set_destroy_callback.xml

@@ -21,7 +21,7 @@
     <refname>sd_event_source_get_destroy_callback</refname>
     <refname>sd_event_destroy_t</refname>
 
-    <refpurpose>Define the callback function for resource cleanup.</refpurpose>
+    <refpurpose>Define the callback function for resource cleanup</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_journal_has_runtime_files.xml

@@ -21,7 +21,7 @@
   <refnamediv>
     <refname>sd_journal_has_runtime_files</refname>
     <refname>sd_journal_has_persistent_files</refname>
-    <refpurpose>Query availability of runtime or persistent journal files.</refpurpose>
+    <refpurpose>Query availability of runtime or persistent journal files</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_machine_get_class.xml

@@ -19,7 +19,7 @@
     <refname>sd_machine_get_class</refname>
     <refname>sd_machine_get_ifindices</refname>
     <refpurpose>Determine the class and network interface indices of a
-    locally running virtual machine or container.</refpurpose>
+    locally running virtual machine or container</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sd_pid_get_owner_uid.xml

@@ -35,7 +35,7 @@
     <refname>sd_peer_get_cgroup</refname>
     <refpurpose>Determine the owner uid of the user unit or session,
     or the session, user unit, system unit, container/VM or slice that
-    a specific PID or socket peer belongs to.</refpurpose>
+    a specific PID or socket peer belongs to</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/sysctl.d.xml

@@ -70,11 +70,11 @@ key.pattern.overridden.with.glob = custom
     followed by <literal>=</literal>, see SYNOPSIS.</para>
 
     <para>Any access permission errors and attempts to write variables not present on the local system are
-    logged, but do not cause the service to fail. Debug log level is used, which means that the message will
-    not show up at all by default. Moreover, if a variable assignment is prefixed with a single
-    <literal>-</literal> character, any failure to set the variable will be logged at debug level, but will
-    not cause the service to fail. All other errors when setting variables are logged with higher priority
-    and cause the service to return failure at the end (other variables are still processed).</para>
+    logged at debug level and do not cause the service to fail. Moreover, if a variable assignment is
+    prefixed with a single <literal>-</literal> character, failure to set the variable for other reasons will
+    be logged at debug level and will not cause the service to fail. In other cases, errors when setting
+    variables are logged with higher priority and cause the service to return failure at the end (after
+    processing other variables).</para>
 
     <para>The settings configured with <filename>sysctl.d</filename> files will be applied early on boot. The
     network interface-specific options will also be applied individually for each network interface as it

man/systemctl.xml

@@ -412,7 +412,7 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
 
             <para>The "Loaded:" line in the output will show <literal>loaded</literal> if the unit has been loaded into
             memory. Other possible values for "Loaded:" include: <literal>error</literal> if there was a problem
-            loading it, <literal>not-found</literal> if not unit file was found for this unit,
+            loading it, <literal>not-found</literal> if no unit file was found for this unit,
             <literal>bad-setting</literal> if an essential unit file setting could not be parsed and
             <literal>masked</literal> if the unit file has been masked. Along with showing the path to the unit file,
             this line will also show the enablement state.  Enabled commands start at boot.  See the full table of
@@ -582,7 +582,7 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
 
           <listitem>
             <para>Enable one or more units or unit instances. This will create a set of symlinks, as encoded in the
-            <literal>[Install]</literal> sections of the indicated unit files. After the symlinks have been created,
+            [Install] sections of the indicated unit files. After the symlinks have been created,
             the system manager configuration is reloaded (in a way equivalent to <command>daemon-reload</command>), in
             order to ensure the changes are taken into account immediately. Note that this does
             <emphasis>not</emphasis> have the effect of also starting any of the units being enabled. If this is
@@ -605,7 +605,7 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
             <option>--quiet</option>.
             </para>
 
-            <para>Note that this operation creates only the symlinks suggested in the <literal>[Install]</literal>
+            <para>Note that this operation creates only the symlinks suggested in the [Install]
             section of the unit files. While this command is the recommended way to manipulate the unit configuration
             directory, the administrator is free to make additional changes manually by placing or removing symlinks
             below this directory. This is particularly useful to create configurations that deviate from the suggested
@@ -645,7 +645,7 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
             <para>This command expects valid unit names only, it does not accept paths to unit files.</para>
 
             <para>In addition to the units specified as arguments, all units are disabled that are listed in the
-            <varname>Also=</varname> setting contained in the <literal>[Install]</literal> section of any of the unit
+            <varname>Also=</varname> setting contained in the [Install] section of any of the unit
             files being operated on.</para>
 
             <para>This command implicitly reloads the system manager configuration after completing the operation. Note
@@ -668,7 +668,7 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
           <listitem>
             <para>Reenable one or more units, as specified on the command line. This is a combination of
             <command>disable</command> and <command>enable</command> and is useful to reset the symlinks a unit file is
-            enabled with to the defaults configured in its <literal>[Install]</literal> section. This command expects
+            enabled with to the defaults configured in its [Install] section. This command expects
             a unit name only, it does not accept paths to unit files.</para>
           </listitem>
         </varlistentry>
@@ -768,17 +768,17 @@ Jan 12 10:46:45 example.com bluetoothd[8900]: gatt-time-server: Input/output err
                   </row>
                   <row>
                     <entry><literal>static</literal></entry>
-                    <entry>The unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> unit file section.</entry>
+                    <entry>The unit file is not enabled, and has no provisions for enabling in the [Install] unit file section.</entry>
                     <entry>0</entry>
                   </row>
                   <row>
                     <entry><literal>indirect</literal></entry>
-                    <entry>The unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> unit file section, listing other unit files that might be enabled, or it has an alias under a different name through a symlink that is not specified in <varname>Also=</varname>. For template unit file, an instance different than the one specified in <varname>DefaultInstance=</varname> is enabled.</entry>
+                    <entry>The unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the [Install] unit file section, listing other unit files that might be enabled, or it has an alias under a different name through a symlink that is not specified in <varname>Also=</varname>. For template unit files, an instance different than the one specified in <varname>DefaultInstance=</varname> is enabled.</entry>
                     <entry>0</entry>
                   </row>
                   <row>
                     <entry><literal>disabled</literal></entry>
-                    <entry>The unit file is not enabled, but contains an <literal>[Install]</literal> section with installation instructions.</entry>
+                    <entry>The unit file is not enabled, but contains an [Install] section with installation instructions.</entry>
                     <entry>&gt; 0</entry>
                   </row>
                   <row>

man/systemd-analyze.xml

@@ -509,9 +509,9 @@ NAutoVTs=8
       <para>This command will load unit files and print warnings if any errors are detected. Files specified
       on the command line will be loaded, but also any other units referenced by them. The full unit search
       path is formed by combining the directories for all command line arguments, and the usual unit load
-      paths (variable <varname>$SYSTEMD_UNIT_PATH</varname> is supported, and may be used to replace or
+      paths. The variable <varname>$SYSTEMD_UNIT_PATH</varname> is supported, and may be used to replace or
       augment the compiled in set of unit load paths; see
-      <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>).  All
+      <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. All
       units files present in the directories containing the command line arguments will be used in preference
       to the other paths.</para>
 
@@ -700,9 +700,9 @@ Service b@0.service not loaded, b.socket cannot be started.
       <varlistentry>
         <term><option>--man=no</option></term>
 
-        <listitem><para>Do not invoke man to verify the existence of
-        man pages listed in <varname>Documentation=</varname>.
-        </para></listitem>
+        <listitem><para>Do not invoke
+        <citerefentry project='man-pages'><refentrytitle>man</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        to verify the existence of man pages listed in <varname>Documentation=</varname>.</para></listitem>
       </varlistentry>
 
       <varlistentry>

man/systemd-bless-boot-generator.xml

@@ -17,7 +17,7 @@
 
   <refnamediv>
     <refname>systemd-bless-boot-generator</refname>
-    <refpurpose>Pull <filename>systemd-bless-boot.service</filename> into the initial boot transaction when boot counting is in effect.</refpurpose>
+    <refpurpose>Pull <filename>systemd-bless-boot.service</filename> into the initial boot transaction when boot counting is in effect</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/systemd-boot.xml

@@ -91,7 +91,7 @@
 
       <listitem><para>The boot manager optionally reads a random seed from the ESP partition, combines it
       with a 'system token' stored in a persistent EFI variable and derives a random seed to use by the OS as
-      entropy pool initializaton, providing a full entropy pool during early boot.</para></listitem>
+      entropy pool initialization, providing a full entropy pool during early boot.</para></listitem>
     </itemizedlist>
 
     <para><citerefentry><refentrytitle>bootctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
@@ -313,7 +313,7 @@
         is maintained persistently, while <varname>LoaderConfigTimeoutOneShot</varname> is a one-time override which is
         read once (in which case it takes precedence over <varname>LoaderConfigTimeout</varname>) and then
         removed. <varname>LoaderConfigTimeout</varname> may be manipulated with the
-        <keycap>t</keycap>/<keycap>T</keycap> keys, see above.)</para></listitem>
+        <keycap>t</keycap>/<keycap>T</keycap> keys, see above.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -422,9 +422,9 @@
       <varlistentry>
         <term><varname>LoaderSystemToken</varname></term>
 
-        <listitem><para>A binary random data field, that is used for generating the random see to pass to the
-        OS (see above). Note that this random data is generally only generated once, during OS installation,
-        and is then never updated again.</para></listitem>
+        <listitem><para>A binary random data field, that is used for generating the random seed to pass to
+        the OS (see above). Note that this random data is generally only generated once, during OS
+        installation, and is then never updated again.</para></listitem>
       </varlistentry>
     </variablelist>
 

man/systemd-gpt-auto-generator.xml

@@ -19,7 +19,7 @@
     <refname>systemd-gpt-auto-generator</refname>
     <refpurpose>Generator for automatically discovering and mounting root, <filename>/home/</filename>,
     <filename>/srv/</filename>, <filename>/var/</filename> and <filename>/var/tmp/</filename> partitions, as
-    well as discovering and enabling swap partitions, based on GPT partition type GUIDs.</refpurpose>
+    well as discovering and enabling swap partitions, based on GPT partition type GUIDs</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/systemd-journal-gatewayd.service.xml

@@ -217,9 +217,9 @@
     </para>
 
     <para>where
-      <option>cursor</option> is a cursor string,
-      <option>num_skip</option> is an integer,
-      <option>num_entries</option> is an unsigned integer.
+      <replaceable>cursor</replaceable> is a cursor string,
+      <replaceable>num_skip</replaceable> is an integer,
+      <replaceable>num_entries</replaceable> is an unsigned integer.
     </para>
 
     <para>Range defaults to all available events.</para>

man/systemd-journal-upload.service.xml

@@ -267,7 +267,7 @@ openssl ca -batch -config ca.conf -notext -in $CLIENT.csr -out $CLIENT.pem
       those files can be specified using
       <varname>TrustedCertificateFile=</varname>,
       <varname>ServerCertificateFile=</varname>,
-      <varname>ServerKeyFile=</varname>, in
+      and <varname>ServerKeyFile=</varname> in
       <filename>/etc/systemd/journal-remote.conf</filename> and
       <filename>/etc/systemd/journal-upload.conf</filename>,
       respectively. The default locations can be queried by using

man/systemd-logind.service.xml

@@ -103,7 +103,7 @@
       <citerefentry><refentrytitle>systemd-user-sessions.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+      <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>
     </para>
   </refsect1>

man/systemd-mount.xml

@@ -50,10 +50,11 @@
     <replaceable>WHERE</replaceable>.</para>
 
     <para>In many ways, <command>systemd-mount</command> is similar to the lower-level
-    <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> command, however instead
-    of executing the mount operation directly and immediately, <command>systemd-mount</command> schedules it through
-    the service manager job queue, so that it may pull in further dependencies (such as parent mounts, or a file system
-    checker to execute a priori), and may make use of the auto-mounting logic.</para>
+    <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+    command, however instead of executing the mount operation directly and immediately,
+    <command>systemd-mount</command> schedules it through the service manager job queue, so that it may pull
+    in further dependencies (such as parent mounts, or a file system checker to execute a priori), and may
+    make use of the auto-mounting logic.</para>
 
     <para>The command takes either one or two arguments. If only one argument is specified it should refer to
     a block device or regular file containing a file system (e.g. <literal>/dev/sdb1</literal> or
@@ -61,15 +62,15 @@
     label and other metadata, and is mounted to a directory below <filename>/run/media/system/</filename>
     whose name is generated from the file system label. In this mode the block device or image file must
     exist at the time of invocation of the command, so that it may be probed. If the device is found to be a
-    removable block device (e.g. a USB stick) an automount point instead of a regular mount point is created
+    removable block device (e.g. a USB stick), an automount point is created instead of a regular mount point
     (i.e. the <option>--automount=</option> option is implied, see below).</para>
 
-    <para>If two arguments are specified the first indicates the mount source (the <replaceable>WHAT</replaceable>) and
-    the second indicates the path to mount it on (the <replaceable>WHERE</replaceable>). In this mode no probing of the
-    source is attempted, and a backing device node doesn't have to exist yet. However, if this mode is combined with
-    <option>--discover</option>, device node probing for additional metadata is enabled, and – much like in the
-    single-argument case discussed above – the specified device has to exist at the time of invocation of the
-    command.</para>
+    <para>If two arguments are specified, the first indicates the mount source (the
+    <replaceable>WHAT</replaceable>) and the second indicates the path to mount it on (the
+    <replaceable>WHERE</replaceable>). In this mode no probing of the source is attempted, and a backing
+    device node doesn't have to exist. However, if this mode is combined with <option>--discover</option>,
+    device node probing for additional metadata is enabled, and – much like in the single-argument case
+    discussed above – the specified device has to exist at the time of invocation of the command.</para>
 
     <para>Use the <option>--list</option> command to show a terse table of all local, known block devices with file
     systems that may be mounted with this command.</para>

man/systemd-nspawn.xml

@@ -531,11 +531,9 @@
         <term><option>-u</option></term>
         <term><option>--user=</option></term>
 
-        <listitem><para>After transitioning into the container, change
-        to the specified user-defined in the container's user
-        database. Like all other systemd-nspawn features, this is not
-        a security feature and provides protection against accidental
-        destructive operations only.</para></listitem>
+        <listitem><para>After transitioning into the container, change to the specified user defined in the
+        container's user database. Like all other systemd-nspawn features, this is not a security feature and
+        provides protection against accidental destructive operations only.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -1167,10 +1165,9 @@
 
         <para>Finally, if set to <literal>auto</literal> the file is left as it is if private networking is
         turned on (see <option>--private-network</option>). Otherwise, if
-        <filename>systemd-resolved.service</filename> is connectible its stub
-        <filename>resolv.conf</filename> file is used, and if not the host's
-        <filename>/etc/resolv.conf</filename> file is used. In the latter cases the file is copied if the
-        image is writable, and bind mounted otherwise.</para>
+        <filename>systemd-resolved.service</filename> is running its stub <filename>resolv.conf</filename>
+        file is used, and if not the host's <filename>/etc/resolv.conf</filename> file. In the latter cases
+        the file is copied if the image is writable, and bind mounted otherwise.</para>
 
         <para>It's recommended to use <literal>copy-…</literal> or <literal>replace-…</literal> if the
         container shall be able to make changes to the DNS configuration on its own, deviating from the
@@ -1186,19 +1183,20 @@
       <varlistentry>
         <term><option>--timezone=</option></term>
 
-        <listitem><para>Configures how <filename>/etc/localtime</filename> inside of the container (i.e. local timezone
-        synchronization from host to container) shall be handled. Takes one of <literal>off</literal>,
-        <literal>copy</literal>, <literal>bind</literal>, <literal>symlink</literal>, <literal>delete</literal> or
-        <literal>auto</literal>. If set to <literal>off</literal> the <filename>/etc/localtime</filename> file in the
-        container is left as it is included in the image, and neither modified nor bind mounted over. If set to
-        <literal>copy</literal> the <filename>/etc/localtime</filename> file of the host is copied into the
-        container. Similar, if <literal>bind</literal> is used, it is bind mounted from the host into the container. If
-        set to <literal>symlink</literal> a symlink from <filename>/etc/localtime</filename> in the container is
-        created pointing to the matching the timezone file of the container that matches the timezone setting on the
-        host. If set to <literal>delete</literal> the file in the container is deleted, should it exist. If set to
-        <literal>auto</literal> and the <filename>/etc/localtime</filename> file of the host is a symlink, then
-        <literal>symlink</literal> mode is used, and <literal>copy</literal> otherwise, except if the image is
-        read-only in which case <literal>bind</literal> is used instead. Defaults to
+        <listitem><para>Configures how <filename>/etc/localtime</filename> inside of the container
+        (i.e. local timezone synchronization from host to container) shall be handled. Takes one of
+        <literal>off</literal>, <literal>copy</literal>, <literal>bind</literal>, <literal>symlink</literal>,
+        <literal>delete</literal> or <literal>auto</literal>. If set to <literal>off</literal> the
+        <filename>/etc/localtime</filename> file in the container is left as it is included in the image, and
+        neither modified nor bind mounted over. If set to <literal>copy</literal> the
+        <filename>/etc/localtime</filename> file of the host is copied into the container. Similarly, if
+        <literal>bind</literal> is used, the file is bind mounted from the host into the container. If set to
+        <literal>symlink</literal>, a symlink is created pointing from <filename>/etc/localtime</filename> in
+        the container to the timezone file in the container that matches the timezone setting on the host. If
+        set to <literal>delete</literal>, the file in the container is deleted, should it exist. If set to
+        <literal>auto</literal> and the <filename>/etc/localtime</filename> file of the host is a symlink,
+        then <literal>symlink</literal> mode is used, and <literal>copy</literal> otherwise, except if the
+        image is read-only in which case <literal>bind</literal> is used instead. Defaults to
         <literal>auto</literal>.</para></listitem>
       </varlistentry>
 
@@ -1441,7 +1439,7 @@
 
       <para>This installs a minimal Fedora distribution into the
       directory <filename index="false">/var/lib/machines/f&fedora_latest_version;</filename>
-      and then boots an OS in a namespace container in it. Because the installation
+      and then boots that OS in a namespace container. Because the installation
       is located underneath the standard <filename>/var/lib/machines/</filename>
       directory, it is also possible to start the machine using
       <command>systemd-nspawn -M f&fedora_latest_version;</command>.</para>
@@ -1455,7 +1453,7 @@
 
       <para>This installs a minimal Debian unstable distribution into
       the directory <filename>~/debian-tree/</filename> and then
-      spawns a shell in a namespace container in it.</para>
+      spawns a shell from this image in a namespace container.</para>
 
       <para><command>debootstrap</command> supports
       <ulink url="https://www.debian.org">Debian</ulink>,

man/systemd-random-seed.service.xml

@@ -44,7 +44,7 @@
     <citerefentry><refentrytitle>systemd-boot</refentrytitle><manvolnum>7</manvolnum></citerefentry>, with
     its <command>bootctl random-seed</command> functionality.</para>
 
-    <para>When loading the random seed from disk its file is immediately updated with a new seed retrieved
+    <para>When loading the random seed from disk, the file is immediately updated with a new seed retrieved
     from the kernel, in order to ensure no two boots operate with the same random seed. This new seed is
     retrieved synchronously from the kernel, which means the service will not complete start-up until the
     random pool is fully initialized. On entropy-starved systems this may take a while. This functionality is

man/systemd-repart.xml

@@ -57,9 +57,10 @@
     available but not yet used. Specifically the following use cases are among those covered:</para>
 
     <itemizedlist>
-      <listitem><para>The root partition may be grown to cover the whole available disk space</para></listitem>
-      <listitem><para>A <filename>/home/</filename>, swap or <filename>/srv/</filename> partition can be added in</para></listitem>
-      <listitem><para>A second (or third, …) root partition may be added in, to cover A/B style setups
+      <listitem><para>The root partition may be grown to cover the whole available disk space.</para></listitem>
+      <listitem><para>A <filename>/home/</filename>, swap or <filename>/srv/</filename> partition can be
+      added.</para></listitem>
+      <listitem><para>A second (or third, …) root partition may be added, to cover A/B style setups
       where a second version of the root file system is alternatingly used for implementing update
       schemes. The deployed image would carry only a single partition ("A") but on first boot a second
       partition ("B") for this purpose is automatically created.</para></listitem>
@@ -69,7 +70,7 @@
 
     <orderedlist>
       <listitem><para>The <filename>repart.d/*.conf</filename> configuration files are loaded and parsed,
-      and ordered by filename (without the directory suffix). </para></listitem>
+      and ordered by filename (without the directory prefix).</para></listitem>
 
       <listitem><para>The partition table already existing on the block device is loaded and
       parsed.</para></listitem>
@@ -119,13 +120,13 @@
     </orderedlist>
 
     <para>As exception to the normally strictly incremental operation, when called in a special "factory
-    reset" mode <command>systemd-repart</command> may also be used to erase select existing partitions to
+    reset" mode, <command>systemd-repart</command> may also be used to erase existing partitions to
     reset an installation back to vendor defaults. This mode of operation is used when either the
     <option>--factory-reset=yes</option> switch is passed on the tool's command line, or the
     <option>systemd.factory_reset=yes</option> option specified on the kernel command line, or the
     <varname>FactoryReset</varname> EFI variable (vendor UUID
     <constant>8cf2644b-4b0b-428f-9387-6d876050dc67</constant>) is set to "yes". It alters the algorithm above
-    slightly: between the 3rd and the 4th step above the any partition marked explicitly via the
+    slightly: between the 3rd and the 4th step above any partition marked explicitly via the
     <varname>FactoryReset=</varname> boolean is deleted, and the algorithm restarted, thus immediately
     re-creating these partitions anew empty.</para>
 
@@ -267,9 +268,9 @@
       <varlistentry>
         <term><option>--definitions=</option></term>
 
-        <listitem><para>Takes a file system path. If specified the <filename>*.conf</filename> are directly
-        read from the specified directory instead of searching in
-        <filename>/usr/lib/repart.d/*.conf</filename>, <filename>/etc/repart.d/*.conf</filename>,
+        <listitem><para>Takes a file system path. If specified the <filename>*.conf</filename> files are read
+        from the specified directory instead of searching in <filename>/usr/lib/repart.d/*.conf</filename>,
+        <filename>/etc/repart.d/*.conf</filename>,
         <filename>/run/repart.d/*.conf</filename>.</para></listitem>
       </varlistentry>
 

man/systemd-sleep.conf.xml

@@ -105,7 +105,7 @@
     <title>Options</title>
 
     <para>The following options can be configured in the
-    <literal>[Sleep]</literal> section of
+    [Sleep] section of
     <filename>/etc/systemd/sleep.conf</filename> or a
     <filename>sleep.conf.d</filename> file:</para>
 

man/systemd-socket-proxyd.xml

@@ -16,7 +16,7 @@
   </refmeta>
   <refnamediv>
     <refname>systemd-socket-proxyd</refname>
-    <refpurpose>Bidirectionally proxy local sockets to another (possibly remote) socket.</refpurpose>
+    <refpurpose>Bidirectionally proxy local sockets to another (possibly remote) socket</refpurpose>
   </refnamediv>
   <refsynopsisdiv>
     <cmdsynopsis>

man/systemd-suspend.service.xml

@@ -71,19 +71,16 @@
     url="https://www.freedesktop.org/wiki/Software/systemd/inhibit">Inhibitor
     interface</ulink>.</para>
 
-    <para>Note that
-    <filename>systemd-suspend.service</filename>,
-    <filename>systemd-hibernate.service</filename>, and
-    <filename>systemd-hybrid-sleep.service</filename>
-    <filename>systemd-suspend-then-hibernate.service</filename>
-    should never be executed directly. Instead, trigger system sleep
-    states with a command such as <literal>systemctl suspend</literal>
-    or similar.</para>
+    <para>Note that <filename>systemd-suspend.service</filename>,
+    <filename>systemd-hibernate.service</filename>, <filename>systemd-hybrid-sleep.service</filename>, and
+    <filename>systemd-suspend-then-hibernate.service</filename> should never be executed directly. Instead,
+    trigger system sleep with a command such as <command>systemctl suspend</command> or <command>systemctl
+    hibernate</command>.</para>
 
     <para>Internally, this service will echo a string like
     <literal>mem</literal> into <filename>/sys/power/state</filename>,
     to trigger the actual system suspend. What exactly is written
-    where can be configured in the <literal>[Sleep]</literal> section
+    where can be configured in the [Sleep] section
     of <filename>/etc/systemd/sleep.conf</filename> or a
     <filename>sleep.conf.d</filename> file. See
     <citerefentry><refentrytitle>systemd-sleep.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.

man/systemd-system.conf.xml

@@ -58,7 +58,7 @@
     <title>Options</title>
 
     <para>All options are configured in the
-    <literal>[Manager]</literal> section:</para>
+    [Manager] section:</para>
 
     <variablelist class='config-directives'>
 
@@ -149,7 +149,7 @@
         for details. During the first phase of the shutdown operation the system and service manager remains running
         and hence <varname>RuntimeWatchdogSec=</varname> is still honoured. In order to define a timeout on this first
         phase of system shutdown, configure <varname>JobTimeoutSec=</varname> and <varname>JobTimeoutAction=</varname>
-        in the <literal>[Unit]</literal> section of the <filename>shutdown.target</filename> unit. By default
+        in the [Unit] section of the <filename>shutdown.target</filename> unit. By default
         <varname>RuntimeWatchdogSec=</varname> defaults to 0 (off), and <varname>RebootWatchdogSec=</varname> to
         10min. <varname>KExecWatchdogSec=</varname> may be used to additionally enable the watchdog when kexec
         is being executed rather than when rebooting. Note that if the kernel does not reset the watchdog on kexec (depending
@@ -387,9 +387,9 @@
         units. See
         <citerefentry><refentrytitle>setrlimit</refentrytitle><manvolnum>2</manvolnum></citerefentry> for
         details. These settings may be overridden in individual units using the corresponding
-        <varname>LimitXXX=</varname> directives, see
-        <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, for
-        details, and they accept the same parameter syntax. Note that these resource limits are only defaults
+        <varname>LimitXXX=</varname> directives and they accept the same parameter syntax,
+        see <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+        for details. Note that these resource limits are only defaults
         for units, they are not applied to the service manager process (i.e. PID 1) itself.</para></listitem>
       </varlistentry>
 

man/systemd-time-wait-sync.service.xml

@@ -18,7 +18,7 @@
   <refnamediv>
     <refname>systemd-time-wait-sync.service</refname>
     <refname>systemd-time-wait-sync</refname>
-    <refpurpose>Wait Until Kernel Time Synchronized</refpurpose>
+    <refpurpose>Wait until kernel time is synchronized</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>

man/systemd.automount.xml

@@ -35,9 +35,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The automount specific configuration options
-    are configured in the <literal>[Automount]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The automount specific configuration options
+    are configured in the [Automount] section.</para>
 
     <para>Automount units must be named after the automount directories they control. Example: the automount point
     <filename index="false">/home/lennart</filename> must be configured in a unit file

man/systemd.device.xml

@@ -36,8 +36,8 @@
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
     configuration items are configured in the generic
-    <literal>[Unit]</literal> and <literal>[Install]</literal>
-    sections. A separate <literal>[Device]</literal> section does not
+    [Unit] and [Install]
+    sections. A separate [Device] section does not
     exist, since no device-specific options may be configured.</para>
 
     <para>systemd will dynamically create device units for all kernel
@@ -60,7 +60,7 @@
     <para>Device units will be reloaded by systemd whenever the
     corresponding device generates a <literal>changed</literal> event.
     Other units can use <varname>ReloadPropagatedFrom=</varname> to react
-    to that event</para>
+    to that event.</para>
   </refsect1>
 
   <refsect1>

man/systemd.dnssd.xml

@@ -64,7 +64,7 @@
   <refsect1>
     <title>[Service] Section Options</title>
 
-      <para>The network service file contains a <literal>[Service]</literal>
+      <para>The network service file contains a [Service]
       section, which specifies a discoverable network service announced in a
       local network with Multicast DNS broadcasts.</para>
 

man/systemd.exec.xml

@@ -511,10 +511,11 @@ CapabilityBoundingSet=~CAP_B CAP_C</programlisting>
       <varlistentry>
         <term><varname>AppArmorProfile=</varname></term>
 
-        <listitem><para>Takes a profile name as argument. The process executed by the unit will switch to this profile
-        when started.  Profiles must already be loaded in the kernel, or the unit will fail. This result in a non
-        operation if AppArmor is not enabled. If prefixed by <literal>-</literal>, all errors will be ignored. This
-        does not affect commands prefixed with <literal>+</literal>.</para></listitem>
+        <listitem><para>Takes a profile name as argument. The process executed by the unit will switch to
+        this profile when started. Profiles must already be loaded in the kernel, or the unit will fail. If
+        prefixed by <literal>-</literal>, all errors will be ignored. This setting has no effect if AppArmor
+        is not enabled. This setting not affect commands prefixed with <literal>+</literal>.</para>
+        </listitem>
       </varlistentry>
 
       <varlistentry>
@@ -880,7 +881,7 @@ CapabilityBoundingSet=~CAP_B CAP_C</programlisting>
         in <varname>NUMAMask=</varname>. For more details on each policy please see,
         <citerefentry><refentrytitle>set_mempolicy</refentrytitle><manvolnum>2</manvolnum></citerefentry>. For overall
         overview of NUMA support in Linux see,
-        <citerefentry project='man-pages'><refentrytitle>numa</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+        <citerefentry project='man-pages'><refentrytitle>numa</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
         </para></listitem>
       </varlistentry>
 
@@ -1067,14 +1068,16 @@ CapabilityBoundingSet=~CAP_B CAP_C</programlisting>
         <varname>RootDirectory=</varname> or <varname>RootImage=</varname> these paths always reside on the host and
         are mounted from there into the unit's file system namespace.</para>
 
-        <para>If <varname>DynamicUser=</varname> is used in conjunction with <varname>StateDirectory=</varname>,
-        <varname>CacheDirectory=</varname> and <varname>LogsDirectory=</varname> is slightly altered: the directories
-        are created below <filename>/var/lib/private</filename>, <filename>/var/cache/private</filename> and
+        <para>If <varname>DynamicUser=</varname> is used in conjunction with
+        <varname>StateDirectory=</varname>, the logic for <varname>CacheDirectory=</varname> and
+        <varname>LogsDirectory=</varname> is slightly altered: the directories are created below
+        <filename>/var/lib/private</filename>, <filename>/var/cache/private</filename> and
         <filename>/var/log/private</filename>, respectively, which are host directories made inaccessible to
-        unprivileged users, which ensures that access to these directories cannot be gained through dynamic user ID
-        recycling. Symbolic links are created to hide this difference in behaviour. Both from perspective of the host
-        and from inside the unit, the relevant directories hence always appear directly below
-        <filename>/var/lib</filename>, <filename>/var/cache</filename> and <filename>/var/log</filename>.</para>
+        unprivileged users, which ensures that access to these directories cannot be gained through dynamic
+        user ID recycling. Symbolic links are created to hide this difference in behaviour. Both from
+        perspective of the host and from inside the unit, the relevant directories hence always appear
+        directly below <filename>/var/lib</filename>, <filename>/var/cache</filename> and
+        <filename>/var/log</filename>.</para>
 
         <para>Use <varname>RuntimeDirectory=</varname> to manage one or more runtime directories for the unit and bind
         their lifetime to the daemon runtime. This is particularly useful for unprivileged daemons that cannot create
@@ -1238,8 +1241,8 @@ BindReadOnlyPaths=/var/lib/systemd</programlisting>
         <term><varname>PrivateTmp=</varname></term>
 
         <listitem><para>Takes a boolean argument. If true, sets up a new file system namespace for the executed
-        processes and mounts private <filename>/tmp</filename> and <filename>/var/tmp</filename> directories inside it
-        that is not shared by processes outside of the namespace. This is useful to secure access to temporary files of
+        processes and mounts private <filename>/tmp/</filename> and <filename>/var/tmp/</filename> directories inside it
+        that are not shared by processes outside of the namespace. This is useful to secure access to temporary files of
         the process, but makes sharing between processes via <filename>/tmp</filename> or <filename>/var/tmp</filename>
         impossible. If this is enabled, all temporary files created by a service in these directories will be removed
         after the service is stopped.  Defaults to false. It is possible to run two or more units within the same
@@ -1399,7 +1402,7 @@ BindReadOnlyPaths=/var/lib/systemd</programlisting>
         this option removes <constant>CAP_SYS_TIME</constant> and <constant>CAP_WAKE_ALARM</constant> from the
         capability bounding set for this unit, installs a system call filter to block calls that can set the
         clock, and <varname>DeviceAllow=char-rtc r</varname> is implied. This ensures <filename>/dev/rtc0</filename>,
-        <filename>/dev/rtc1</filename>, etc are made read only to the service. See
+        <filename>/dev/rtc1</filename>, etc. are made read-only to the service. See
         <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>
         for the details about <varname>DeviceAllow=</varname>.</para>
 
@@ -1495,7 +1498,7 @@ BindReadOnlyPaths=/var/lib/systemd</programlisting>
         <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>)
         are unaffected. Also, sockets created with <function>socketpair()</function> (which creates connected
         AF_UNIX sockets only) are unaffected. Note that this option has no effect on 32-bit x86, s390, s390x,
-        mips, mips-le, ppc, ppc-le, pcc64, ppc64-le and is ignored (but works correctly on other ABIs,
+        mips, mips-le, ppc, ppc-le, ppc64, ppc64-le and is ignored (but works correctly on other ABIs,
         including x86-64). Note that on systems supporting multiple ABIs (such as x86/x86-64) it is
         recommended to turn off alternative ABIs for services, so that they cannot be used to circumvent the
         restrictions of this option. Specifically, it is recommended to combine this option with
@@ -1803,7 +1806,7 @@ RestrictNamespaces=~cgroup net</programlisting>
               </row>
               <row>
                 <entry>@file-system</entry>
-                <entry>File system operations: opening, creating files and directories for read and write, renaming and removing them, reading file properties, or creating hard and symbolic links.</entry>
+                <entry>File system operations: opening, creating files and directories for read and write, renaming and removing them, reading file properties, or creating hard and symbolic links</entry>
               </row>
               <row>
                 <entry>@io-event</entry>
@@ -1819,7 +1822,7 @@ RestrictNamespaces=~cgroup net</programlisting>
               </row>
               <row>
                 <entry>@memlock</entry>
-                <entry>Locking of memory into RAM (<citerefentry project='man-pages'><refentrytitle>mlock</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>mlockall</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)</entry>
+                <entry>Locking of memory in RAM (<citerefentry project='man-pages'><refentrytitle>mlock</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>mlockall</refentrytitle><manvolnum>2</manvolnum></citerefentry> and related calls)</entry>
               </row>
               <row>
                 <entry>@module</entry>
@@ -1843,7 +1846,7 @@ RestrictNamespaces=~cgroup net</programlisting>
               </row>
               <row>
                 <entry>@process</entry>
-                <entry>Process control, execution, namespaceing operations (<citerefentry project='man-pages'><refentrytitle>clone</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>namespaces</refentrytitle><manvolnum>7</manvolnum></citerefentry>, …</entry>
+                <entry>Process control, execution, namespaceing operations (<citerefentry project='man-pages'><refentrytitle>clone</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>namespaces</refentrytitle><manvolnum>7</manvolnum></citerefentry>, …)</entry>
               </row>
               <row>
                 <entry>@raw-io</entry>
@@ -1871,7 +1874,7 @@ RestrictNamespaces=~cgroup net</programlisting>
               </row>
               <row>
                 <entry>@sync</entry>
-                <entry>Synchronizing files and memory to disk: (<citerefentry project='man-pages'><refentrytitle>fsync</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>msync</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)</entry>
+                <entry>Synchronizing files and memory to disk (<citerefentry project='man-pages'><refentrytitle>fsync</refentrytitle><manvolnum>2</manvolnum></citerefentry>, <citerefentry project='man-pages'><refentrytitle>msync</refentrytitle><manvolnum>2</manvolnum></citerefentry>, and related calls)</entry>
               </row>
               <row>
                 <entry>@system-service</entry>
@@ -1949,7 +1952,7 @@ SystemCallErrorNumber=EPERM</programlisting>
         manager is compiled for). If running in user mode, or in system mode, but without the
         <constant>CAP_SYS_ADMIN</constant> capability (e.g. setting <varname>User=nobody</varname>),
         <varname>NoNewPrivileges=yes</varname> is implied. By default, this option is set to the empty list, i.e. no
-        system call architecture filtering is applied.</para>
+        filtering is applied.</para>
 
         <para>If this setting is used, processes of this unit will only be permitted to call native system calls, and
         system calls of the specified architectures. For the purposes of this option, the x32 architecture is treated
@@ -2213,8 +2216,9 @@ SystemCallErrorNumber=EPERM</programlisting>
         <constant>AF_UNIX</constant> socket in the file system, as in that case only a
         single stream connection is created for both input and output.</para>
 
-        <para><option>append:<replaceable>path</replaceable></option> is similar to <option>file:<replaceable>path
-        </replaceable></option> above, but it opens the file in append mode.</para>
+        <para><option>append:<replaceable>path</replaceable></option> is similar to
+        <option>file:<replaceable>path</replaceable></option> above, but it opens the file in append mode.
+        </para>
 
         <para><option>socket</option> connects standard output to a socket acquired via socket activation. The
         semantics are similar to the same option of <varname>StandardInput=</varname>, see above.</para>
@@ -2551,7 +2555,7 @@ StandardInputData=SWNrIHNpdHplIGRhIHVuJyBlc3NlIEtsb3BzLAp1ZmYgZWVtYWwga2xvcHAncy
     <varname>UnsetEnvironment=</varname> are removed again from the compiled environment variable list, immediately
     before it is passed to the executed process.</para>
 
-    <para>The following select environment variables are set or propagated by the service manager for each invoked
+    <para>The following environment variables are set or propagated by the service manager for each invoked
     process:</para>
 
     <variablelist class='environment-variables'>
@@ -2622,7 +2626,7 @@ StandardInputData=SWNrIHNpdHplIGRhIHVuJyBlc3NlIEtsb3BzLAp1ZmYgZWVtYWwga2xvcHAncy
         <term><varname>$LOGS_DIRECTORY</varname></term>
         <term><varname>$CONFIGURATION_DIRECTORY</varname></term>
 
-        <listitem><para>Contains and absolute paths to the directories defined with
+        <listitem><para>Absolute paths to the directories defined with
         <varname>RuntimeDirectory=</varname>, <varname>StateDirectory=</varname>,
         <varname>CacheDirectory=</varname>, <varname>LogsDirectory=</varname>, and
         <varname>ConfigurationDirectory=</varname> when those settings are used.</para>
@@ -3228,7 +3232,7 @@ StandardInputData=SWNrIHNpdHplIGRhIHVuJyBlc3NlIEtsb3BzLAp1ZmYgZWVtYWwga2xvcHAncy
           <row>
             <entry>242</entry>
             <entry><constant>EXIT_NUMA_POLICY</constant></entry>
-            <entry>Failed to set up unit's NUMA memory policy. See <varname>NUMAPolicy=</varname> and <varname>NUMAMask=</varname>above.</entry>
+            <entry>Failed to set up unit's NUMA memory policy. See <varname>NUMAPolicy=</varname> and <varname>NUMAMask=</varname> above.</entry>
           </row>
 
         </tbody>

man/systemd.journal-fields.xml

@@ -524,7 +524,8 @@
     structured log entries via calls such as
     <citerefentry><refentrytitle>sd_journal_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
     They may also not be used as matches for
-    <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry></para>
+    <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
+    </para>
 
     <variablelist class='journal-directives'>
       <varlistentry>

man/systemd.kill.xml

@@ -151,7 +151,7 @@
         terminate upon receiving the initial <constant>SIGTERM</constant>
         signal. This can be achieved by configuring <varname>LimitCORE=</varname>
         and setting <varname>FinalKillSignal=</varname> to either
-        <constant>SIGQUIT</constant> or <constant>SIGABRT</constant>
+        <constant>SIGQUIT</constant> or <constant>SIGABRT</constant>.
         Defaults to <constant>SIGKILL</constant>.
         </para></listitem>
       </varlistentry>

man/systemd.link.xml

@@ -64,8 +64,8 @@
     <title>[Match] Section Options</title>
 
     <para>A link file is said to match a device if all matches specified by the
-    <literal>[Match]</literal> section are satisfied. When a link file does not contain valid settings
-    in <literal>[Match]</literal> section, then the file will match all devices and
+    [Match] section are satisfied. When a link file does not contain valid settings
+    in [Match] section, then the file will match all devices and
     <command>systemd-udevd</command> warns about that. Hint: to avoid the warning and to make it clear
     that all interfaces shall be matched, add the following:
     <programlisting>OriginalName=*</programlisting>

man/systemd.mount.xml

@@ -34,9 +34,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The mount specific configuration options are
-    configured in the <literal>[Mount]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The mount specific configuration options are
+    configured in the [Mount] section.</para>
 
     <para>Additional options are listed in
     <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,

man/systemd.net-naming-scheme.xml

@@ -357,7 +357,7 @@
       </variablelist>
 
     <para>Note that <constant>latest</constant> may be used to denote the latest scheme known (to this
-    particular version of systemd.</para>
+    particular version of systemd).</para>
   </refsect1>
 
   <refsect1>

man/systemd.netdev.xml

@@ -114,10 +114,10 @@
           <entry>An IPv4 over IPv4 tunnel.</entry></row>
 
           <row><entry><varname>ipvlan</varname></entry>
-          <entry>An ipvlan device is a stacked device which receives packets from its underlying device based on IP address filtering.</entry></row>
+          <entry>An IPVLAN device is a stacked device which receives packets from its underlying device based on IP address filtering.</entry></row>
 
           <row><entry><varname>ipvtap</varname></entry>
-          <entry>An ipvtap device is a stacked device which receives packets from its underlying device based on IP address filtering and can be accessed using the tap user space interface.</entry></row>
+          <entry>An IPVTAP device is a stacked device which receives packets from its underlying device based on IP address filtering and can be accessed using the tap user space interface.</entry></row>
 
           <row><entry><varname>macvlan</varname></entry>
           <entry>A macvlan device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row>
@@ -193,7 +193,7 @@
     <title>[Match] Section Options</title>
 
     <para>A virtual network device is only created if the
-    <literal>[Match]</literal> section matches the current
+    [Match] section matches the current
     environment, or if the section is empty. The following keys are
     accepted:</para>
 
@@ -259,7 +259,7 @@
   <refsect1>
     <title>[NetDev] Section Options</title>
 
-    <para>The <literal>[NetDev]</literal> section accepts the
+    <para>The [NetDev] section accepts the
     following keys:</para>
 
     <variablelist class='network-directives'>
@@ -273,13 +273,13 @@
         <term><varname>Name=</varname></term>
         <listitem>
           <para>The interface name used when creating the netdev.
-          This option is compulsory.</para>
+          This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>Kind=</varname></term>
         <listitem>
-          <para>The netdev kind. This option is compulsory. See the
+          <para>The netdev kind. This setting is compulsory. See the
           <literal>Supported netdev kinds</literal> section for the
           valid keys.</para>
         </listitem>
@@ -287,10 +287,10 @@
       <varlistentry>
         <term><varname>MTUBytes=</varname></term>
         <listitem>
-          <para>The maximum transmission unit in bytes to set for the device. The usual suffixes K, M, G,
+          <para>The maximum transmission unit in bytes to set for the device. The usual suffixes K, M, G
           are supported and are understood to the base of 1024. For <literal>tun</literal> or
           <literal>tap</literal> devices, <varname>MTUBytes=</varname> setting is not currently supported in
-          <literal>[NetDev]</literal> section. Please specify it in <literal>[Link]</literal> section of
+          [NetDev] section. Please specify it in [Link] section of
           corresponding
           <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>
           files.</para>
@@ -300,8 +300,8 @@
         <term><varname>MACAddress=</varname></term>
         <listitem>
           <para>The MAC address to use for the device. For <literal>tun</literal> or <literal>tap</literal>
-          devices, setting <varname>MACAddress=</varname> in the <literal>[NetDev]</literal> section is not
-          supported. Please specify it in <literal>[Link]</literal> section of the corresponding
+          devices, setting <varname>MACAddress=</varname> in the [NetDev] section is not
+          supported. Please specify it in [Link] section of the corresponding
           <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>
           file. If this option is not set, <literal>vlan</literal> devices inherit the MAC address of the
           physical interface. For other kind of netdevs, if this option is not set, then MAC address is
@@ -316,7 +316,7 @@
   <refsect1>
     <title>[Bridge] Section Options</title>
 
-    <para>The <literal>[Bridge]</literal> section only applies for
+    <para>The [Bridge] section only applies for
     netdevs of kind <literal>bridge</literal>, and accepts the
     following keys:</para>
 
@@ -436,7 +436,7 @@
   <refsect1>
     <title>[VLAN] Section Options</title>
 
-    <para>The <literal>[VLAN]</literal> section only applies for
+    <para>The [VLAN] section only applies for
     netdevs of kind <literal>vlan</literal>, and accepts the
     following key:</para>
 
@@ -445,7 +445,7 @@
         <term><varname>Id=</varname></term>
         <listitem>
           <para>The VLAN ID to use. An integer in the range 0–4094.
-          This option is compulsory.</para>
+          This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -478,8 +478,8 @@
       <varlistentry>
         <term><varname>ReorderHeader=</varname></term>
         <listitem>
-          <para>Takes a boolean. The VLAN reorder header is set VLAN interfaces behave like physical interfaces.
-          When unset, the kernel's default will be used.</para>
+          <para>Takes a boolean. When enabled, the VLAN reorder header is used and VLAN interfaces behave
+          like physical interfaces. When unset, the kernel's default will be used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -488,7 +488,7 @@
   <refsect1>
     <title>[MACVLAN] Section Options</title>
 
-    <para>The <literal>[MACVLAN]</literal> section only applies for
+    <para>The [MACVLAN] section only applies for
     netdevs of kind <literal>macvlan</literal>, and accepts the
     following key:</para>
 
@@ -510,15 +510,15 @@
   <refsect1>
     <title>[MACVTAP] Section Options</title>
 
-    <para>The <literal>[MACVTAP]</literal> section applies for
+    <para>The [MACVTAP] section applies for
     netdevs of kind <literal>macvtap</literal> and accepts the
-    same key as <literal>[MACVLAN]</literal>.</para>
+    same key as [MACVLAN].</para>
   </refsect1>
 
   <refsect1>
     <title>[IPVLAN] Section Options</title>
 
-    <para>The <literal>[IPVLAN]</literal> section only applies for
+    <para>The [IPVLAN] section only applies for
     netdevs of kind <literal>ipvlan</literal>, and accepts the
     following key:</para>
 
@@ -545,15 +545,15 @@
   <refsect1>
     <title>[IPVTAP] Section Options</title>
 
-    <para>The <literal>[IPVTAP]</literal> section only applies for
+    <para>The [IPVTAP] section only applies for
     netdevs of kind <literal>ipvtap</literal> and accepts the
-    same key as <literal>[IPVLAN]</literal>.</para>
+    same key as [IPVLAN].</para>
   </refsect1>
 
   <refsect1>
     <title>[VXLAN] Section Options</title>
 
-    <para>The <literal>[VXLAN]</literal> section only applies for
+    <para>The [VXLAN] section only applies for
     netdevs of kind <literal>vxlan</literal>, and accepts the
     following keys:</para>
 
@@ -579,7 +579,8 @@
       <varlistentry>
         <term><varname>Group=</varname></term>
         <listitem>
-          <para>Configures VXLAN multicast group IP address. All members of a VXLAN must use the same multicast group address.</para>
+          <para>Configures VXLAN multicast group IP address. All members of a VXLAN must use the same
+          multicast group address.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -637,8 +638,7 @@
       <varlistentry>
         <term><varname>L3MissNotification=</varname></term>
         <listitem>
-          <para>Takes a boolean. When true, enables netlink IP address miss
-          notifications.</para>
+          <para>Takes a boolean. When true, enables netlink IP address miss notifications.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -739,7 +739,7 @@
   <refsect1>
     <title>[GENEVE] Section Options</title>
 
-    <para>The <literal>[GENEVE]</literal> section only applies for
+    <para>The [GENEVE] section only applies for
     netdevs of kind <literal>geneve</literal>, and accepts the
     following keys:</para>
 
@@ -765,15 +765,16 @@
       <varlistentry>
         <term><varname>TTL=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[VXLAN]</literal> section except when unset or
-          set to 0, the kernel's default will be used meaning that packets TTL will be set from
+          <para>Accepts the same values as in the [VXLAN] section, except that when unset
+          or set to 0, the kernel's default will be used, meaning that packet TTL will be set from
           <filename>/proc/sys/net/ipv4/ip_default_ttl</filename>.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>UDPChecksum=</varname></term>
         <listitem>
-          <para>Takes a boolean. When true, specifies if UDP checksum is calculated for transmitted packets over IPv4.</para>
+          <para>Takes a boolean. When true, specifies that UDP checksum is calculated for transmitted packets
+          over IPv4.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -804,7 +805,7 @@
       <varlistentry>
         <term><varname>IPDoNotFragment=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[VXLAN]</literal> section.</para>
+          <para>Accepts the same key in [VXLAN] section.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -813,7 +814,7 @@
   <refsect1>
     <title>[L2TP] Section Options</title>
 
-    <para>The <literal>[L2TP]</literal> section only applies for
+    <para>The [L2TP] section only applies for
     netdevs of kind <literal>l2tp</literal>, and accepts the
     following keys:</para>
 
@@ -821,21 +822,23 @@
       <varlistentry>
         <term><varname>TunnelId=</varname></term>
         <listitem>
-          <para>Specifies the tunnel id. The value used must match the <literal>PeerTunnelId=</literal> value being used at the peer.
-          Ranges a number between 1 and 4294967295). This option is compulsory.</para>
+          <para>Specifies the tunnel identifier. Takes an number in the range 1–4294967295. The value used
+          must match the <literal>PeerTunnelId=</literal> value being used at the peer. This setting is
+          compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>PeerTunnelId=</varname></term>
         <listitem>
-          <para>Specifies the peer tunnel id. The value used must match the <literal>PeerTunnelId=</literal> value being used at the peer.
-          Ranges a number between 1 and 4294967295). This option is compulsory.</para>
+          <para>Specifies the peer tunnel id. Takes a number in the range 1—4294967295. The value used must
+          match the <literal>PeerTunnelId=</literal> value being used at the peer. This setting is
+          compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>Remote=</varname></term>
         <listitem>
-          <para>Specifies the IP address of the remote peer. This option is compulsory.</para>
+          <para>Specifies the IP address of the remote peer. This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -852,27 +855,29 @@
       <varlistentry>
         <term><varname>EncapsulationType=</varname></term>
         <listitem>
-          <para>Specifies the encapsulation type of the tunnel. Takes one of <literal>udp</literal> or <literal>ip</literal>.</para>
+          <para>Specifies the encapsulation type of the tunnel. Takes one of <literal>udp</literal> or
+          <literal>ip</literal>.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>UDPSourcePort=</varname></term>
         <listitem>
-          <para>Specifies the UDP source port to be used for the tunnel. When UDP encapsulation is selected it's mandotory. Ignored when ip
-          encapsulation is selected.</para>
+          <para>Specifies the UDP source port to be used for the tunnel. When UDP encapsulation is selected
+          it's mandatory. Ignored when IP encapsulation is selected.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>UDPDestinationPort=</varname></term>
         <listitem>
-          <para>Specifies destination port. When UDP encapsulation is selected it's mandotory. Ignored when ip
+          <para>Specifies destination port. When UDP encapsulation is selected it's mandatory. Ignored when IP
           encapsulation is selected.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>UDPChecksum=</varname></term>
         <listitem>
-          <para>Takes a boolean. When true, specifies if UDP checksum is calculated for transmitted packets over IPv4.</para>
+          <para>Takes a boolean. When true, specifies that UDP checksum is calculated for transmitted packets
+          over IPv4.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -893,28 +898,30 @@
   <refsect1>
     <title>[L2TPSession] Section Options</title>
 
-    <para>The <literal>[L2TPSession]</literal> section only applies for
+    <para>The [L2TPSession] section only applies for
     netdevs of kind <literal>l2tp</literal>, and accepts the
     following keys:</para>
     <variablelist class='network-directives'>
       <varlistentry>
         <term><varname>Name=</varname></term>
         <listitem>
-          <para>Specifies the name of the session. This option is compulsory.</para>
+          <para>Specifies the name of the session. This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>SessionId=</varname></term>
         <listitem>
-          <para>Specifies the session id. The value used must match the <literal>SessionId=</literal> value being used at the peer.
-          Ranges a number between 1 and 4294967295). This option is compulsory.</para>
+          <para>Specifies the session identifier. Takes an number in the range 1–4294967295. The value used
+          must match the <literal>SessionId=</literal> value being used at the peer. This setting is
+          compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>PeerSessionId=</varname></term>
         <listitem>
-          <para>Specifies the peer session id. The value used must match the <literal>PeerSessionId=</literal> value being used at the peer.
-          Ranges a number between 1 and 4294967295). This option is compulsory.</para>
+          <para>Specifies the peer session identifier. Takes an number in the range 1–4294967295.
+          The value used must match the <literal>PeerSessionId=</literal> value being used at the peer.
+          This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -929,7 +936,7 @@
   <refsect1>
     <title>[MACsec] Section Options</title>
 
-    <para>The <literal>[MACsec]</literal> section only applies for network devices of kind
+    <para>The [MACsec] section only applies for network devices of kind
     <literal>macsec</literal>, and accepts the following keys:</para>
 
     <variablelist class='network-directives'>
@@ -952,7 +959,7 @@
 
   <refsect1>
     <title>[MACsecReceiveChannel] Section Options</title>
-    <para>The <literal>[MACsecReceiveChannel]</literal> section only applies for network devices of
+    <para>The [MACsecReceiveChannel] section only applies for network devices of
     kind <literal>macsec</literal>, and accepts the following keys:</para>
 
     <variablelist class='network-directives'>
@@ -968,7 +975,7 @@
         <term><varname>MACAddress=</varname></term>
         <listitem>
           <para>Specifies the MAC address to be used for the MACsec receive channel. The MAC address
-          used to make secure channel identifier (SCI). This option is compulsory, and is not set by
+          used to make secure channel identifier (SCI). This setting is compulsory, and is not set by
           default.</para>
         </listitem>
       </varlistentry>
@@ -978,7 +985,7 @@
   <refsect1>
     <title>[MACsecTransmitAssociation] Section Options</title>
 
-    <para>The <literal>[MACsecTransmitAssociation]</literal> section only applies for network devices
+    <para>The [MACsecTransmitAssociation] section only applies for network devices
     of kind <literal>macsec</literal>, and accepts the following keys:</para>
 
     <variablelist class='network-directives'>
@@ -1002,7 +1009,7 @@
         <term><varname>Key=</varname></term>
         <listitem>
           <para>Specifies the encryption key used in the transmission channel. The same key must be
-          configured on the peer’s matching receive channel. This option is compulsory, and is not set
+          configured on the peer’s matching receive channel. This setting is compulsory, and is not set
           by default. Takes a 128-bit key encoded in a hexadecimal string, for example
           <literal>dffafc8d7b9a43d5b9a3dfbbf6a30c16</literal>.</para>
         </listitem>
@@ -1028,7 +1035,7 @@
         <term><varname>UseForEncoding=</varname></term>
         <listitem>
           <para>Takes a boolean. If enabled, then the security association is used for encoding. Only
-          one <literal>[MACsecTransmitAssociation]</literal> section can enable this option. When enabled,
+          one [MACsecTransmitAssociation] section can enable this option. When enabled,
           <varname>Activate=yes</varname> is implied. Defaults to unset.</para>
         </listitem>
       </varlistentry>
@@ -1038,7 +1045,7 @@
   <refsect1>
     <title>[MACsecReceiveAssociation] Section Options</title>
 
-    <para>The <literal>[MACsecReceiveAssociation]</literal> section only applies for
+    <para>The [MACsecReceiveAssociation] section only applies for
     network devices of kind <literal>macsec</literal>, and accepts the
     following keys:</para>
 
@@ -1046,43 +1053,43 @@
       <varlistentry>
         <term><varname>Port=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecReceiveChannel]</literal> section.</para>
+          <para>Accepts the same key in [MACsecReceiveChannel] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>MACAddress=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecReceiveChannel]</literal> section.</para>
+          <para>Accepts the same key in [MACsecReceiveChannel] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>PacketNumber=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecTransmitAssociation]</literal> section.</para>
+          <para>Accepts the same key in [MACsecTransmitAssociation] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>KeyId=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecTransmitAssociation]</literal> section.</para>
+          <para>Accepts the same key in [MACsecTransmitAssociation] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>Key=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecTransmitAssociation]</literal> section.</para>
+          <para>Accepts the same key in [MACsecTransmitAssociation] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>KeyFile=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecTransmitAssociation]</literal> section.</para>
+          <para>Accepts the same key in [MACsecTransmitAssociation] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>Activate=</varname></term>
         <listitem>
-          <para>Accepts the same key in <literal>[MACsecTransmitAssociation]</literal> section.</para>
+          <para>Accepts the same key in [MACsecTransmitAssociation] section.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -1091,7 +1098,7 @@
   <refsect1>
     <title>[Tunnel] Section Options</title>
 
-    <para>The <literal>[Tunnel]</literal> section only applies for
+    <para>The [Tunnel] section only applies for
     netdevs of kind
     <literal>ipip</literal>,
     <literal>sit</literal>,
@@ -1136,7 +1143,7 @@
           <para>A fixed Time To Live N on tunneled packets. N is a
           number in the range 1–255. 0 is a special value meaning that
           packets inherit the TTL value. The default value for IPv4
-          tunnels is: inherit. The default value for IPv6 tunnels is
+          tunnels is 0 (inherit). The default value for IPv6 tunnels is
           64.</para>
         </listitem>
       </varlistentry>
@@ -1192,7 +1199,7 @@
           both directions (<varname>InputKey=</varname> and <varname>OutputKey=</varname>).
           The <varname>Key=</varname> is either a number or an IPv4 address-like dotted quad.
           It is used as mark-configured SAD/SPD entry as part of the lookup key (both in data
-          and control path) in ip xfrm (framework used to implement IPsec protocol).
+          and control path) in IP XFRM (framework used to implement IPsec protocol).
           See <ulink url="http://man7.org/linux/man-pages/man8/ip-xfrm.8.html">
           ip-xfrm — transform configuration</ulink> for details. It is only used for VTI/VTI6,
           GRE, GRETAP, and ERSPAN tunnels.</para>
@@ -1274,7 +1281,7 @@
       <varlistentry>
         <term><varname>Encapsulation=</varname></term>
         <listitem>
-          <para>Accepts the same key as in the <literal>[FooOverUDP]</literal> section.</para>
+          <para>Accepts the same key as in the [FooOverUDP] section.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -1314,7 +1321,7 @@
   <refsect1>
     <title>[FooOverUDP] Section Options</title>
 
-    <para>The <literal>[FooOverUDP]</literal> section only applies for
+    <para>The [FooOverUDP] section only applies for
     netdevs of kind <literal>fou</literal> and accepts the
     following keys:</para>
 
@@ -1322,29 +1329,32 @@
       <varlistentry>
         <term><varname>Encapsulation=</varname></term>
         <listitem>
-          <para>Specifies the encapsulation mechanism used to store networking packets of various protocols inside the UDP packets. Supports the following values:
+          <para>Specifies the encapsulation mechanism used to store networking packets of various protocols
+          inside the UDP packets. Supports the following values:
 
-          <literal>FooOverUDP</literal> provides the simplest no frills model of UDP encapsulation, it simply encapsulates
-          packets directly in the UDP payload.
-          <literal>GenericUDPEncapsulation</literal> is a generic and extensible encapsulation, it allows encapsulation of packets for any IP
-          protocol and optional data as part of the encapsulation.
-          For more detailed information see <ulink url="https://lwn.net/Articles/615044">Generic UDP Encapsulation</ulink>.
-          Defaults to <literal>FooOverUDP</literal>.
+          <literal>FooOverUDP</literal> provides the simplest no frills model of UDP encapsulation, it simply
+          encapsulates packets directly in the UDP payload. <literal>GenericUDPEncapsulation</literal> is a
+          generic and extensible encapsulation, it allows encapsulation of packets for any IP protocol and
+          optional data as part of the encapsulation. For more detailed information see <ulink
+          url="https://lwn.net/Articles/615044">Generic UDP Encapsulation</ulink>. Defaults to
+          <literal>FooOverUDP</literal>.
           </para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>Port=</varname></term>
         <listitem>
-          <para>Specifies the port number, where the IP encapsulation packets will arrive. Please take note that the packets
-          will arrive with the encapsulation will be removed. Then they will be manually fed back into the network stack, and sent ahead
-          for delivery to the real destination. This option is mandatory.</para>
+          <para>Specifies the port number, where the IP encapsulation packets will arrive. Please take note
+          that the packets will arrive with the encapsulation will be removed. Then they will be manually fed
+          back into the network stack, and sent ahead for delivery to the real destination. This option is
+          mandatory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
         <term><varname>PeerPort=</varname></term>
         <listitem>
-          <para>Specifies the peer port number. Defaults to unset. Note that when peer port is set <literal>Peer=</literal> address is mandotory.</para>
+          <para>Specifies the peer port number. Defaults to unset. Note that when peer port is set
+          <literal>Peer=</literal> address is mandatory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -1360,7 +1370,8 @@
       <varlistentry>
         <term><varname>Peer=</varname></term>
         <listitem>
-          <para>Configures peer IP address. Note that when peer address is set <literal>PeerPort=</literal> is mandotory.</para>
+          <para>Configures peer IP address. Note that when peer address is set <literal>PeerPort=</literal>
+          is mandatory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -1375,7 +1386,7 @@
   <refsect1>
     <title>[Peer] Section Options</title>
 
-    <para>The <literal>[Peer]</literal> section only applies for
+    <para>The [Peer] section only applies for
     netdevs of kind <literal>veth</literal> and accepts the
     following keys:</para>
 
@@ -1384,7 +1395,7 @@
         <term><varname>Name=</varname></term>
         <listitem>
           <para>The interface name used when creating the netdev.
-          This option is compulsory.</para>
+          This setting is compulsory.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -1401,7 +1412,7 @@
   <refsect1>
     <title>[VXCAN] Section Options</title>
 
-    <para>The <literal>[VXCAN]</literal> section only applies for
+    <para>The [VXCAN] section only applies for
     netdevs of kind <literal>vxcan</literal> and accepts the
     following key:</para>
 
@@ -1410,7 +1421,7 @@
         <term><varname>Peer=</varname></term>
         <listitem>
           <para>The peer interface name used when creating the netdev.
-          This option is compulsory.</para>
+          This setting is compulsory.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -1419,7 +1430,7 @@
   <refsect1>
     <title>[Tun] Section Options</title>
 
-    <para>The <literal>[Tun]</literal> section only applies for
+    <para>The [Tun] section only applies for
     netdevs of kind <literal>tun</literal>, and accepts the following
     keys:</para>
 
@@ -1469,15 +1480,15 @@
   <refsect1>
     <title>[Tap] Section Options</title>
 
-    <para>The <literal>[Tap]</literal> section only applies for
+    <para>The [Tap] section only applies for
     netdevs of kind <literal>tap</literal>, and accepts the same keys
-    as the <literal>[Tun]</literal> section.</para>
+    as the [Tun] section.</para>
   </refsect1>
 
   <refsect1>
     <title>[WireGuard] Section Options</title>
 
-    <para>The <literal>[WireGuard]</literal> section accepts the following
+    <para>The [WireGuard] section accepts the following
     keys:</para>
 
     <variablelist class='network-directives'>
@@ -1524,7 +1535,7 @@
   <refsect1>
     <title>[WireGuardPeer] Section Options</title>
 
-    <para>The <literal>[WireGuardPeer]</literal> section accepts the following
+    <para>The [WireGuardPeer] section accepts the following
     keys:</para>
 
     <variablelist class='network-directives'>
@@ -1600,7 +1611,7 @@
   <refsect1>
     <title>[Bond] Section Options</title>
 
-    <para>The <literal>[Bond]</literal> section accepts the following
+    <para>The [Bond] section accepts the following
     key:</para>
 
     <variablelist class='network-directives'>
@@ -1702,14 +1713,15 @@
       <varlistentry>
         <term><varname>AdActorSystemPriority=</varname></term>
         <listitem>
-          <para>Specifies the 802.3ad actor system priority. Ranges [1-65535].</para>
+          <para>Specifies the 802.3ad actor system priority. Takes a number in the range 1—65535.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>AdUserPortKey=</varname></term>
         <listitem>
-          <para>Specifies the 802.3ad user defined portion of the port key. Ranges [0-1023].</para>
+          <para>Specifies the 802.3ad user defined portion of the port key. Takes a number in the range
+          0–1023.</para>
         </listitem>
       </varlistentry>
 
@@ -1879,7 +1891,7 @@
   <refsect1>
     <title>[Xfrm] Section Options</title>
 
-    <para>The <literal>[Xfrm]</literal> section accepts the following
+    <para>The [Xfrm] section accepts the following
     keys:</para>
 
     <variablelist class='network-directives'>
@@ -1902,13 +1914,12 @@
     </variablelist>
 
     <para>For more detail information see
-      <ulink url="https://lwn.net/Articles/757391">
-        Virtual xfrm interfaces</ulink></para>
+      <ulink url="https://lwn.net/Articles/757391">Virtual XFRM Interfaces</ulink>.</para>
   </refsect1>
 
   <refsect1>
     <title>[VRF] Section Options</title>
-    <para>The <literal>[VRF]</literal> section only applies for
+    <para>The [VRF] section only applies for
     netdevs of kind <literal>vrf</literal> and accepts the
     following key:</para>
 
@@ -1916,7 +1927,7 @@
       <varlistentry>
         <term><varname>Table=</varname></term>
         <listitem>
-          <para>The numeric routing table identifier. This option is compulsory.</para>
+          <para>The numeric routing table identifier. This setting is compulsory.</para>
         </listitem>
       </varlistentry>
     </variablelist>

man/systemd.network.xml

@@ -72,21 +72,16 @@
   <refsect1>
     <title>[Match] Section Options</title>
 
-      <para>The network file contains a <literal>[Match]</literal>
-      section, which determines if a given network file may be applied
-      to a given device; and a <literal>[Network]</literal> section
-      specifying how the device should be configured. The first (in
-      lexical order) of the network files that matches a given device
-      is applied, all later files are ignored, even if they match as
-      well.</para>
+      <para>The network file contains a [Match] section, which determines if a given network file may be
+      applied to a given device; and a [Network] section specifying how the device should be configured. The
+      first (in lexical order) of the network files that matches a given device is applied, all later files
+      are ignored, even if they match as well.</para>
 
-      <para>A network file is said to match a network interface if all matches specified by the
-      <literal>[Match]</literal> section are satisfied. When a network file does not contain valid
-      settings in <literal>[Match]</literal> section, then the file will match all interfaces and
-      <command>systemd-networkd</command> warns about that. Hint: to avoid the warning and to make it
-      clear that all interfaces shall be matched, add the following:
-      <programlisting>Name=*</programlisting>
-      The following keys are accepted:</para>
+      <para>A network file is said to match a network interface if all matches specified by the [Match]
+      section are satisfied. When a network file does not contain valid settings in [Match] section, then the
+      file will match all interfaces and <command>systemd-networkd</command> warns about that. Hint: to avoid
+      the warning and to make it clear that all interfaces shall be matched, add the following:
+      <programlisting>Name=*</programlisting> The following keys are accepted:</para>
 
       <variablelist class='network-directives'>
         <xi:include href="systemd.link.xml" xpointer="mac-address" />
@@ -132,9 +127,8 @@
           <listitem>
             <para>A whitespace-separated list of hardware address of the currently connected wireless
             LAN. Use full colon-, hyphen- or dot-delimited hexadecimal. See the example in
-            <varname>MACAddress=</varname>. This option may appear more than one, in which case the
-            lists are merged. If the empty string is assigned to this option, the list of BSSID defined
-            prior to this is reset.</para>
+            <varname>MACAddress=</varname>. This option may appear more than once, in which case the
+            lists are merged. If the empty string is assigned to this option, the list is reset.</para>
           </listitem>
         </varlistentry>
 
@@ -150,7 +144,7 @@
   <refsect1>
     <title>[Link] Section Options</title>
 
-    <para> The <literal>[Link]</literal> section accepts the following keys:</para>
+    <para> The [Link] section accepts the following keys:</para>
 
     <variablelist class='network-directives'>
       <varlistentry>
@@ -211,7 +205,7 @@
           <para>Link groups are similar to port ranges found in managed switches.
           When network interfaces are added to a numbered group, operations on
           all the interfaces from that group can be performed at once. An unsigned
-          integer ranges 0 to 4294967294. Default to unset.</para>
+          integer in the range 0—4294967294. Defaults to unset.</para>
         </listitem>
       </varlistentry>
       <varlistentry>
@@ -239,12 +233,11 @@
 
   <refsect1>
       <title>[SR-IOV] Section Options</title>
-      <para>The <literal>[SR-IOV]</literal> section accepts the
-      following keys. Specify several <literal>[SR-IOV]</literal>
-      sections to configure several SR-IOVs. SR-IOV provides the ability to partition a single physical PCI resource
-      into virtual PCI functions which can then be injected into a VM. In the case of network VFs, SR-IOV improves
-      north-south network performance (that is, traffic with endpoints outside the host machine) by allowing traffic to
-      bypass the host machine’s network stack.</para>
+      <para>The [SR-IOV] section accepts the following keys. Specify several [SR-IOV] sections to configure
+      several SR-IOVs. SR-IOV provides the ability to partition a single physical PCI resource into virtual
+      PCI functions which can then be injected into a VM. In the case of network VFs, SR-IOV improves
+      north-south network performance (that is, traffic with endpoints outside the host machine) by allowing
+      traffic to bypass the host machine’s network stack.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
@@ -327,7 +320,7 @@
   <refsect1>
     <title>[Network] Section Options</title>
 
-      <para>The <literal>[Network]</literal> section accepts the following keys:</para>
+      <para>The [Network] section accepts the following keys:</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
@@ -356,16 +349,15 @@
             specified through DHCP is not used for name resolution.
             See option <option>UseDomains=</option> below.</para>
 
-            <para>See the <literal>[DHCPv4]</literal> or <literal>[DHCPv6]</literal> section below for
-            further configuration options for the DHCP client support.</para>
+            <para>See the [DHCPv4] or [DHCPv6] sections below for further configuration options for the DHCP
+            client support.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
           <term><varname>DHCPServer=</varname></term>
           <listitem>
             <para>Takes a boolean. If set to <literal>yes</literal>, DHCPv4 server will be started. Defaults
-            to <literal>no</literal>. Further settings for the DHCP
-            server may be set in the <literal>[DHCPServer]</literal>
+            to <literal>no</literal>. Further settings for the DHCP server may be set in the [DHCPServer]
             section described below.</para>
           </listitem>
         </varlistentry>
@@ -495,10 +487,8 @@
         <varlistentry>
           <term><varname>DNSSEC=</varname></term>
           <listitem>
-            <para>Takes a boolean. or
-            <literal>allow-downgrade</literal>. When true, enables
-            <ulink
-            url="https://tools.ietf.org/html/rfc4033">DNSSEC</ulink>
+            <para>Takes a boolean or <literal>allow-downgrade</literal>. When true, enables
+            <ulink url="https://tools.ietf.org/html/rfc4033">DNSSEC</ulink>
             DNS validation support on the link. When set to
             <literal>allow-downgrade</literal>, compatibility with
             non-DNSSEC capable networks is increased, by automatically
@@ -730,8 +720,8 @@
           forwarding is enabled, and to enable it otherwise. Cannot be enabled on bond devices and when link
           local addressing is disabled.</para>
 
-          <para>Further settings for the IPv6 RA support may be configured in the
-          <literal>[IPv6AcceptRA]</literal> section, see below.</para>
+          <para>Further settings for the IPv6 RA support may be configured in the [IPv6AcceptRA] section, see
+          below.</para>
 
           <para>Also see <ulink
           url="https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt">ip-sysctl.txt</ulink> in the kernel
@@ -770,7 +760,7 @@
           <term><varname>IPv4ProxyARP=</varname></term>
           <listitem><para>Takes a boolean. Configures proxy ARP for IPv4. Proxy ARP is the technique in which one host,
           usually a router, answers ARP requests intended for another machine. By "faking" its identity,
-          the router accepts responsibility for routing packets to the "real" destination. (see <ulink
+          the router accepts responsibility for routing packets to the "real" destination. See <ulink
           url="https://tools.ietf.org/html/rfc1027">RFC 1027</ulink>.
           When unset, the kernel's default will be used.
         </para></listitem>
@@ -801,18 +791,15 @@
         </varlistentry>
         <varlistentry>
           <term><varname>IPv6PrefixDelegation=</varname></term>
-          <listitem><para>Whether to enable or disable Router Advertisement sending on a link.
-          Allowed values are <literal>static</literal> which distributes prefixes as defined in
-          the <literal>[IPv6PrefixDelegation]</literal> and any <literal>[IPv6Prefix]</literal>
-          sections, <literal>dhcpv6</literal> which requests prefixes using a DHCPv6 client
-          configured for another link and any values configured in the
-          <literal>[IPv6PrefixDelegation]</literal> section while ignoring all static prefix
-          configuration sections, <literal>yes</literal> which uses both static configuration
-          and DHCPv6, and <literal>false</literal> which turns off IPv6 prefix delegation
-          altogether. Defaults to <literal>false</literal>. See the
-          <literal>[IPv6PrefixDelegation]</literal> and the <literal>[IPv6Prefix]</literal>
-          sections for more configuration options.
-          </para></listitem>
+          <listitem><para>Whether to enable or disable Router Advertisement sending on a link.  Allowed
+          values are <literal>static</literal> which distributes prefixes as defined in the
+          [IPv6PrefixDelegation] and any [IPv6Prefix] sections, <literal>dhcpv6</literal> which requests
+          prefixes using a DHCPv6 client configured for another link and any values configured in the
+          [IPv6PrefixDelegation] section while ignoring all static prefix configuration sections,
+          <literal>yes</literal> which uses both static configuration and DHCPv6, and
+          <literal>false</literal> which turns off IPv6 prefix delegation altogether. Defaults to
+          <literal>false</literal>. See the [IPv6PrefixDelegation] and the [IPv6Prefix] sections for more
+          configuration options.</para></listitem>
         </varlistentry>
         <varlistentry>
           <term><varname>IPv6PDSubnetId=</varname></term>
@@ -978,16 +965,15 @@
   <refsect1>
     <title>[Address] Section Options</title>
 
-      <para>An <literal>[Address]</literal> section accepts the
-      following keys. Specify several <literal>[Address]</literal>
+      <para>An [Address] section accepts the following keys. Specify several [Address]
       sections to configure several addresses.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>Address=</varname></term>
           <listitem>
-            <para>As in the <literal>[Network]</literal> section. This key is mandatory. Each
-            <literal>[Address]</literal> section can contain one <varname>Address=</varname> setting.</para>
+            <para>As in the [Network] section. This key is mandatory. Each [Address] section can contain one
+            <varname>Address=</varname> setting.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1031,7 +1017,7 @@
           <term><varname>Scope=</varname></term>
           <listitem>
             <para>The scope of the address, which can be <literal>global</literal>,
-            <literal>link</literal> or <literal>host</literal> or an unsigned integer ranges 0 to 255.
+            <literal>link</literal> or <literal>host</literal> or an unsigned integer in the range 0—255.
             Defaults to <literal>global</literal>.</para>
           </listitem>
         </varlistentry>
@@ -1093,12 +1079,10 @@
 
   <refsect1>
     <title>[Neighbor] Section Options</title>
-      <para>A <literal>[Neighbor]</literal> section accepts the
-      following keys. The neighbor section adds a permanent, static
-      entry to the neighbor table (IPv6) or ARP table (IPv4) for
-      the given hardware address on the links matched for the network.
-      Specify several <literal>[Neighbor]</literal> sections to configure
-      several static neighbors.</para>
+      <para>A [Neighbor] section accepts the following keys. The neighbor section adds a permanent, static
+      entry to the neighbor table (IPv6) or ARP table (IPv4) for the given hardware address on the links
+      matched for the network. Specify several [Neighbor] sections to configure several static neighbors.
+      </para>
 
       <variablelist class='network-directives'>
         <varlistentry>
@@ -1119,18 +1103,17 @@
     <refsect1>
     <title>[IPv6AddressLabel] Section Options</title>
 
-      <para>An <literal>[IPv6AddressLabel]</literal> section accepts the
-      following keys. Specify several <literal>[IPv6AddressLabel]</literal>
-      sections to configure several address labels. IPv6 address labels are
-      used for address selection. See <ulink url="https://tools.ietf.org/html/rfc3484">RFC 3484</ulink>.
-      Precedence is managed by userspace, and only the label itself is stored in the kernel</para>
+      <para>An [IPv6AddressLabel] section accepts the following keys. Specify several [IPv6AddressLabel]
+      sections to configure several address labels. IPv6 address labels are used for address selection. See
+      <ulink url="https://tools.ietf.org/html/rfc3484">RFC 3484</ulink>. Precedence is managed by userspace,
+      and only the label itself is stored in the kernel</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>Label=</varname></term>
           <listitem>
-            <para> The label for the prefix (an unsigned integer) ranges 0 to 4294967294.
-            0xffffffff is reserved. This key is mandatory.</para>
+            <para>The label for the prefix, an unsigned integer in the range 0–4294967294.
+            0xffffffff is reserved. This setting is mandatory.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1146,15 +1129,14 @@
  <refsect1>
     <title>[RoutingPolicyRule] Section Options</title>
 
-      <para>An <literal>[RoutingPolicyRule]</literal> section accepts the
-      following keys. Specify several <literal>[RoutingPolicyRule]</literal>
+      <para>An [RoutingPolicyRule] section accepts the following keys. Specify several [RoutingPolicyRule]
       sections to configure several rules.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>TypeOfService=</varname></term>
           <listitem>
-            <para>Specifies the type of service to match a number between 0 to 255.</para>
+            <para>Takes a number between 0 and 255 that specifies the type of service to match.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1261,16 +1243,15 @@
 
     <refsect1>
       <title>[NextHop] Section Options</title>
-      <para>The <literal>[NextHop]</literal> section accepts the
-      following keys. Specify several <literal>[NextHop]</literal>
-      sections to configure several nexthop. Nexthop is used to manipulate entries in the kernel's nexthop
-      tables.</para>
+      <para>The [NextHop] section is used to manipulate entries in the kernel's "nexthop" tables.  The
+      [NextHop] section accepts the following keys. Specify several [NextHop] sections to configure several
+      hops.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>Gateway=</varname></term>
           <listitem>
-            <para>As in the <literal>[Network]</literal> section. This is mandatory.</para>
+            <para>As in the [Network] section. This is mandatory.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1284,9 +1265,8 @@
 
   <refsect1>
     <title>[Route] Section Options</title>
-      <para>The <literal>[Route]</literal> section accepts the
-      following keys. Specify several <literal>[Route]</literal>
-      sections to configure several routes.</para>
+      <para>The [Route] section accepts the following keys. Specify several [Route] sections to configure
+      several routes.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
@@ -1333,10 +1313,10 @@
           <term><varname>IPv6Preference=</varname></term>
           <listitem>
             <para>Specifies the route preference as defined in <ulink
-            url="https://tools.ietf.org/html/rfc4191">RFC4191</ulink> for Router Discovery messages.
-            Which can be one of <literal>low</literal> the route has a lowest priority,
-            <literal>medium</literal> the route has a default priority or
-            <literal>high</literal> the route has a highest priority.</para>
+            url="https://tools.ietf.org/html/rfc4191">RFC 4191</ulink> for Router Discovery messages.  Which
+            can be one of <literal>low</literal> the route has a lowest priority, <literal>medium</literal>
+            the route has a default priority or <literal>high</literal> the route has a highest priority.
+            </para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1471,8 +1451,7 @@
 
   <refsect1>
     <title>[DHCPv4] Section Options</title>
-      <para>The <literal>[DHCPv4]</literal> section configures the
-      DHCPv4 client, if it is enabled with the
+      <para>The [DHCPv4] section configures the DHCPv4 client, if it is enabled with the
       <varname>DHCP=</varname> setting described above:</para>
 
       <variablelist class='network-directives'>
@@ -1717,8 +1696,8 @@
             <para>The table identifier for DHCP routes (a number between 1 and 4294967295, or 0 to unset).
             The table can be retrieved using <command>ip route show table <replaceable>num</replaceable></command>.
             </para>
-            <para>When used in combination with <varname>VRF=</varname> the
-            VRF's routing table is used unless this parameter is specified.
+            <para>When used in combination with <varname>VRF=</varname>, the
+            VRF's routing table is used when this parameter is not specified.
             </para>
           </listitem>
         </varlistentry>
@@ -1757,11 +1736,12 @@
         <varlistentry>
           <term><varname>SendDecline=</varname></term>
           <listitem>
-            <para>A boolean. When <literal>true</literal>, DHCPv4 clients receives IP address from DHCP server.
-            After new IP is received, DHCPv4 performs IPv4 Duplicate Address Detection. If duplicate use of IP is detected
-            the DHCPv4 client rejects the IP by sending a DHCPDECLINE packet DHCP clients try to obtain an IP address again.
-            See <ulink url="https://tools.ietf.org/html/rfc5227">RFC 5224</ulink>.
-            Defaults to <literal>unset</literal>.</para>
+            <para>A boolean. When <literal>true</literal>, the DHCPv4 client receives the IP address from the
+            DHCP server.  After a new IP is received, the DHCPv4 client performs IPv4 Duplicate Address
+            Detection. If duplicate use is detected, the DHCPv4 client rejects the IP by sending a
+            DHCPDECLINE packet and tries to obtain an IP address again. See <ulink
+            url="https://tools.ietf.org/html/rfc5227">RFC 5224</ulink>. Defaults to
+            <literal>unset</literal>.</para>
           </listitem>
         </varlistentry>
 
@@ -1814,7 +1794,7 @@
 
   <refsect1>
     <title>[DHCPv6] Section Options</title>
-      <para>The <literal>[DHCPv6]</literal> section configures the DHCPv6 client, if it is enabled with the
+      <para>The [DHCPv6] section configures the DHCPv6 client, if it is enabled with the
       <varname>DHCP=</varname> setting described above, or invoked by the IPv6 Router Advertisement:</para>
 
       <variablelist class='network-directives'>
@@ -1822,7 +1802,7 @@
           <term><varname>UseDNS=</varname></term>
           <term><varname>UseNTP=</varname></term>
           <listitem>
-            <para>As in the <literal>[DHCPv4]</literal> section.</para>
+            <para>As in the [DHCPv4] section.</para>
           </listitem>
         </varlistentry>
 
@@ -1839,7 +1819,7 @@
             <para>Takes a boolean. The DHCPv6 client can obtain configuration parameters from a DHCPv6 server through
             a rapid two-message exchange (solicit and reply). When the rapid commit option is enabled by both
             the DHCPv6 client and the DHCPv6 server, the two-message exchange is used, rather than the default
-            four-method exchange (solicit, advertise, request, and reply). The two-message exchange provides
+            four-message exchange (solicit, advertise, request, and reply). The two-message exchange provides
             faster client configuration and is beneficial in environments in which networks are under a heavy load.
             See <ulink url="https://tools.ietf.org/html/rfc3315#section-17.2.1">RFC 3315</ulink> for details.
             Defaults to true.</para>
@@ -1867,14 +1847,15 @@
         <varlistentry>
           <term><varname>SendVendorOption=</varname></term>
           <listitem>
-            <para>Send an arbitrary vendor option in the DHCPv6 request. Takes an enterprise identifier, DHCP option number,
-            data type, and data separated with a colon
-            (<literal><replaceable>enterprise identifier</replaceable>:<replaceable>option</replaceable>:<replaceable>type</replaceable>:
-            <replaceable>value</replaceable></literal>). Enterprise identifier is an unsigned integer ranges 1..4294967294.
-            The option number must be an integer in the range 1..254. Data type takes one of <literal>uint8</literal>,
-            <literal>uint16</literal>, <literal>uint32</literal>, <literal>ipv4address</literal>, <literal>ipv6address</literal>, or
-            <literal>string</literal>. Special characters in the data string may be escaped using
-            <ulink url="https://en.wikipedia.org/wiki/Escape_sequences_in_C#Table_of_escape_sequences">C-style
+            <para>Send an arbitrary vendor option in the DHCPv6 request. Takes an enterprise identifier, DHCP
+            option number, data type, and data separated with a colon (<literal><replaceable>enterprise
+            identifier</replaceable>:<replaceable>option</replaceable>:<replaceable>type</replaceable>:
+            <replaceable>value</replaceable></literal>). Enterprise identifier is an unsigned integer in the
+            range 1–4294967294. The option number must be an integer in the range 1–254. Data type takes one
+            of <literal>uint8</literal>, <literal>uint16</literal>, <literal>uint32</literal>,
+            <literal>ipv4address</literal>, <literal>ipv6address</literal>, or
+            <literal>string</literal>. Special characters in the data string may be escaped using <ulink
+            url="https://en.wikipedia.org/wiki/Escape_sequences_in_C#Table_of_escape_sequences">C-style
             escapes</ulink>. This setting can be specified multiple times. If an empty string is specified,
             then all options specified earlier are cleared. Defaults to unset.</para>
           </listitem>
@@ -1918,24 +1899,26 @@
         <varlistentry>
           <term><varname>PrefixDelegationHint=</varname></term>
           <listitem>
-            <para>Takes an IPv6 address with prefix length as <varname>Address=</varname> in
-            the "[Network]" section. Specifies the DHCPv6 client for the requesting router to include
-            a prefix-hint in the DHCPv6 solicitation. Prefix ranges 1..128. Defaults to unset.</para>
+            <para>Takes an IPv6 address with prefix length in the same format as the
+            <varname>Address=</varname> in the [Network] section. The DHCPv6 client will include a prefix
+            hint in the DHCPv6 solicitation sent to the server. The prefix length must be in the range
+            1–128. Defaults to unset.</para>
           </listitem>
         </varlistentry>
 
         <varlistentry>
           <term><varname>WithoutRA=</varname></term>
           <listitem>
-            <para>Allows DHCPv6 client to start without router advertisements's managed or other address configuration flag.
-            Takes one of <literal>solicit</literal> or <literal>information-request</literal>. Defaults to unset.</para>
+            <para>Allows DHCPv6 client to start without router advertisements's managed or other address
+            configuration flag. Takes one of <literal>solicit</literal> or
+            <literal>information-request</literal>. Defaults to unset.</para>
           </listitem>
         </varlistentry>
 
         <varlistentry>
           <term><varname>SendOption=</varname></term>
           <listitem>
-            <para>As in the <literal>[DHCPv4]</literal> section, however because DHCPv6 uses 16-bit fields to store
+            <para>As in the [DHCPv4] section, however because DHCPv6 uses 16-bit fields to store
             option numbers, the option number is an integer in the range 1..65536.</para>
           </listitem>
         </varlistentry>
@@ -1969,9 +1952,8 @@
 
   <refsect1>
     <title>[IPv6AcceptRA] Section Options</title>
-      <para>The <literal>[IPv6AcceptRA]</literal> section configures the IPv6 Router Advertisement
-      (RA) client, if it is enabled with the <varname>IPv6AcceptRA=</varname> setting described
-      above:</para>
+      <para>The [IPv6AcceptRA] section configures the IPv6 Router Advertisement (RA) client, if it is enabled
+      with the <varname>IPv6AcceptRA=</varname> setting described above:</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
@@ -2051,8 +2033,7 @@
 
   <refsect1>
     <title>[DHCPServer] Section Options</title>
-    <para>The <literal>[DHCPServer]</literal> section contains
-    settings for the DHCP server, if enabled via the
+    <para>The [DHCPServer] section contains settings for the DHCP server, if enabled via the
     <varname>DHCPServer=</varname> option described above:</para>
 
     <variablelist class='network-directives'>
@@ -2186,11 +2167,9 @@
 
   <refsect1>
     <title>[IPv6PrefixDelegation] Section Options</title>
-    <para>The <literal>[IPv6PrefixDelegation]</literal> section contains
-    settings for sending IPv6 Router Advertisements and whether to act as
-    a router, if enabled via the <varname>IPv6PrefixDelegation=</varname>
-    option described above. IPv6 network prefixes are defined with one or
-    more <literal>[IPv6Prefix]</literal> sections.</para>
+    <para>The [IPv6PrefixDelegation] section contains settings for sending IPv6 Router Advertisements and
+    whether to act as a router, if enabled via the <varname>IPv6PrefixDelegation=</varname> option described
+    above. IPv6 network prefixes are defined with one or more [IPv6Prefix] sections.</para>
 
     <variablelist class='network-directives'>
 
@@ -2234,32 +2213,26 @@
         <term><varname>EmitDNS=</varname></term>
         <term><varname>DNS=</varname></term>
 
-        <listitem><para><varname>DNS=</varname> specifies a list of recursive DNS server IPv6 addresses
-        that are distributed via Router Advertisement messages when <varname>EmitDNS=</varname> is
-        true. <varname>DNS=</varname> also takes special value <literal>_link_local</literal>; in that
-        case the IPv6 link local address is distributed. If <varname>DNS=</varname> is empty, DNS
-        servers are read from the <literal>[Network]</literal> section. If the
-        <literal>[Network]</literal> section does not contain any DNS servers either, DNS servers from
-        the uplink with the highest priority default route are used. When <varname>EmitDNS=</varname>
-        is false, no DNS server information is sent in Router Advertisement messages.
-        <varname>EmitDNS=</varname> defaults to true.
-        </para></listitem>
+        <listitem><para><varname>DNS=</varname> specifies a list of recursive DNS server IPv6 addresses that
+        are distributed via Router Advertisement messages when <varname>EmitDNS=</varname> is
+        true. <varname>DNS=</varname> also takes special value <literal>_link_local</literal>; in that case
+        the IPv6 link local address is distributed. If <varname>DNS=</varname> is empty, DNS servers are read
+        from the [Network] section. If the [Network] section does not contain any DNS servers either, DNS
+        servers from the uplink with the highest priority default route are used. When
+        <varname>EmitDNS=</varname> is false, no DNS server information is sent in Router Advertisement
+        messages. <varname>EmitDNS=</varname> defaults to true.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>EmitDomains=</varname></term>
         <term><varname>Domains=</varname></term>
 
-        <listitem><para>A list of DNS search domains distributed via Router
-        Advertisement messages when <varname>EmitDomains=</varname> is true. If
-        <varname>Domains=</varname> is empty, DNS search domains are read from the
-        <literal>[Network]</literal> section. If the <literal>[Network]</literal>
-        section does not contain any DNS search domains either, DNS search
-        domains from the uplink with the highest priority default route are
-        used. When <varname>EmitDomains=</varname> is false, no DNS search domain
-        information is sent in Router Advertisement messages.
-        <varname>EmitDomains=</varname> defaults to true.
-        </para></listitem>
+        <listitem><para>A list of DNS search domains distributed via Router Advertisement messages when
+        <varname>EmitDomains=</varname> is true. If <varname>Domains=</varname> is empty, DNS search domains
+        are read from the [Network] section. If the [Network] section does not contain any DNS search domains
+        either, DNS search domains from the uplink with the highest priority default route are used. When
+        <varname>EmitDomains=</varname> is false, no DNS search domain information is sent in Router
+        Advertisement messages. <varname>EmitDomains=</varname> defaults to true.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -2275,10 +2248,9 @@
 
     <refsect1>
     <title>[IPv6Prefix] Section Options</title>
-    <para>One or more <literal>[IPv6Prefix]</literal> sections contain the IPv6
-    prefixes that are announced via Router Advertisements. See
-    <ulink url="https://tools.ietf.org/html/rfc4861">RFC 4861</ulink>
-    for further details.</para>
+    <para>One or more [IPv6Prefix] sections contain the IPv6 prefixes that are announced via Router
+    Advertisements. See <ulink url="https://tools.ietf.org/html/rfc4861">RFC 4861</ulink> for further
+    details.</para>
 
     <variablelist class='network-directives'>
 
@@ -2296,13 +2268,11 @@
       <varlistentry>
         <term><varname>Prefix=</varname></term>
 
-        <listitem><para>The IPv6 prefix that is to be distributed to hosts.
-        Similarly to configuring static IPv6 addresses, the setting is
-        configured as an IPv6 prefix and its prefix length, separated by a
-        <literal>/</literal> character. Use multiple
-        <literal>[IPv6Prefix]</literal> sections to configure multiple IPv6
-        prefixes since prefix lifetimes, address autoconfiguration and onlink
-        status may differ from one prefix to another.</para></listitem>
+        <listitem><para>The IPv6 prefix that is to be distributed to hosts.  Similarly to configuring static
+        IPv6 addresses, the setting is configured as an IPv6 prefix and its prefix length, separated by a
+        <literal>/</literal> character. Use multiple [IPv6Prefix] sections to configure multiple IPv6
+        prefixes since prefix lifetimes, address autoconfiguration and onlink status may differ from one
+        prefix to another.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -2325,7 +2295,7 @@
 
     <refsect1>
     <title>[IPv6RoutePrefix] Section Options</title>
-    <para>One or more <literal>[IPv6RoutePrefix]</literal> sections contain the IPv6
+    <para>One or more [IPv6RoutePrefix] sections contain the IPv6
     prefix routes that are announced via Router Advertisements. See
     <ulink url="https://tools.ietf.org/html/rfc4191">RFC 4191</ulink>
     for further details.</para>
@@ -2335,12 +2305,10 @@
       <varlistentry>
         <term><varname>Route=</varname></term>
 
-        <listitem><para>The IPv6 route that is to be distributed to hosts.
-        Similarly to configuring static IPv6 routes, the setting is
-        configured as an IPv6 prefix routes and its prefix route length,
-        separated by a<literal>/</literal> character. Use multiple
-        <literal>[IPv6PrefixRoutes]</literal> sections to configure multiple IPv6
-        prefix routes.</para></listitem>
+        <listitem><para>The IPv6 route that is to be distributed to hosts.  Similarly to configuring static
+        IPv6 routes, the setting is configured as an IPv6 prefix routes and its prefix route length,
+        separated by a <literal>/</literal> character. Use multiple [IPv6PrefixRoutes] sections to configure
+        multiple IPv6 prefix routes.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -2356,8 +2324,7 @@
 
     <refsect1>
     <title>[Bridge] Section Options</title>
-      <para>The <literal>[Bridge]</literal> section accepts the
-      following keys.</para>
+      <para>The [Bridge] section accepts the following keys:</para>
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>UnicastFlood=</varname></term>
@@ -2405,10 +2372,9 @@
         <varlistentry>
           <term><varname>HairPin=</varname></term>
           <listitem>
-            <para>Takes a boolean. Configures whether traffic may be sent back
-            out of the port on which it was received. When this flag is false, and the bridge
-            will not forward traffic back out of the receiving port.
-            When unset, the kernel's default will be used.</para>
+            <para>Takes a boolean. Configures whether traffic may be sent back out of the port on which it
+            was received. When this flag is false, then the bridge will not forward traffic back out of the
+            receiving port. When unset, the kernel's default will be used.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -2484,17 +2450,14 @@
   </refsect1>
   <refsect1>
     <title>[BridgeFDB] Section Options</title>
-      <para>The <literal>[BridgeFDB]</literal> section manages the
-      forwarding database table of a port and accepts the following
-      keys. Specify several <literal>[BridgeFDB]</literal> sections to
-      configure several static MAC table entries.</para>
+      <para>The [BridgeFDB] section manages the forwarding database table of a port and accepts the following
+      keys. Specify several [BridgeFDB] sections to configure several static MAC table entries.</para>
 
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>MACAddress=</varname></term>
           <listitem>
-            <para>As in the <literal>[Network]</literal> section. This
-            key is mandatory.</para>
+            <para>As in the [Network] section. This key is mandatory.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -2537,8 +2500,8 @@
 
   <refsect1>
     <title>[LLDP] Section Options</title>
-      <para>The <literal>[LLDP]</literal> section manages the Link Layer Discovery Protocol (LLDP) and accepts the
-      following keys.</para>
+      <para>The [LLDP] section manages the Link Layer Discovery Protocol (LLDP) and accepts the following
+      keys.</para>
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>MUDURL=</varname></term>
@@ -2559,8 +2522,8 @@
 
   <refsect1>
     <title>[CAN] Section Options</title>
-      <para>The <literal>[CAN]</literal> section manages the Controller Area Network (CAN bus) and accepts the
-      following keys.</para>
+      <para>The [CAN] section manages the Controller Area Network (CAN bus) and accepts the
+      following keys:</para>
       <variablelist class='network-directives'>
         <varlistentry>
           <term><varname>BitRate=</varname></term>
@@ -2638,7 +2601,7 @@
 
   <refsect1>
     <title>[QDisc] Section Options</title>
-    <para>The <literal>[QDisc]</literal> section manages the traffic control queueing discipline (qdisc).</para>
+    <para>The [QDisc] section manages the traffic control queueing discipline (qdisc).</para>
 
     <variablelist class='network-directives'>
       <varlistentry>
@@ -2655,10 +2618,10 @@
 
   <refsect1>
     <title>[NetworkEmulator] Section Options</title>
-    <para>The <literal>[NetworkEmulator]</literal> section manages the queueing discipline (qdisc) of
-    the network emulator. It can be used to configure the kernel packet scheduler and simulate packet
-    delay and loss for UDP or TCP applications, or limit the bandwidth usage of a particular service to
-    simulate internet connections.</para>
+    <para>The [NetworkEmulator] section manages the queueing discipline (qdisc) of the network emulator. It
+    can be used to configure the kernel packet scheduler and simulate packet delay and loss for UDP or TCP
+    applications, or limit the bandwidth usage of a particular service to simulate internet connections.
+    </para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2684,7 +2647,7 @@
         <term><varname>PacketLimit=</varname></term>
         <listitem>
           <para>Specifies the maximum number of packets the qdisc may hold queued at a time.
-          An unsigned integer ranges 0 to 4294967294. Defaults to 1000.</para>
+          An unsigned integer in the range 0–4294967294. Defaults to 1000.</para>
         </listitem>
       </varlistentry>
 
@@ -2708,8 +2671,8 @@
 
   <refsect1>
     <title>[TokenBucketFilter] Section Options</title>
-    <para>The <literal>[TokenBucketFilter]</literal> section manages the queueing discipline (qdisc) of
-    token bucket filter (tbf).</para>
+    <para>The [TokenBucketFilter] section manages the queueing discipline (qdisc) of token bucket filter
+    (tbf).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2782,8 +2745,8 @@
 
   <refsect1>
     <title>[PIE] Section Options</title>
-    <para>The <literal>[PIE]</literal> section manages the queueing discipline
-    (qdisc) of Proportional Integral controller-Enhanced (PIE).</para>
+    <para>The [PIE] section manages the queueing discipline (qdisc) of Proportional Integral
+    controller-Enhanced (PIE).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2793,7 +2756,7 @@
         <term><varname>PacketLimit=</varname></term>
         <listitem>
           <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached, incoming packets are
-          dropped. An unsigned integer ranges 1 to 4294967294. Defaults to unset and kernel's default is used.</para>
+          dropped. An unsigned integer in the range 1–4294967294. Defaults to unset and kernel's default is used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -2801,8 +2764,8 @@
 
   <refsect1>
     <title>[StochasticFairBlue] Section Options</title>
-    <para>The <literal>[StochasticFairBlue]</literal> section manages the queueing discipline
-    (qdisc) of stochastic fair blue (sfb).</para>
+    <para>The [StochasticFairBlue] section manages the queueing discipline (qdisc) of stochastic fair blue
+    (sfb).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2811,8 +2774,9 @@
       <varlistentry>
         <term><varname>PacketLimit=</varname></term>
         <listitem>
-          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached, incoming packets are
-          dropped. An unsigned integer ranges 0 to 4294967294. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached,
+          incoming packets are dropped. An unsigned integer in the range 0–4294967294. Defaults to unset and
+          kernel's default is used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -2820,8 +2784,8 @@
 
   <refsect1>
     <title>[StochasticFairnessQueueing] Section Options</title>
-    <para>The <literal>[StochasticFairnessQueueing]</literal> section manages the queueing discipline
-    (qdisc) of stochastic fairness queueing (sfq).</para>
+    <para>The [StochasticFairnessQueueing] section manages the queueing discipline (qdisc) of stochastic
+    fairness queueing (sfq).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2838,8 +2802,8 @@
 
   <refsect1>
     <title>[BFIFO] Section Options</title>
-    <para>The <literal>[BFIFO]</literal> section manages the queueing discipline (qdisc) of
-    Byte limited Packet First In First Out (bfifo).</para>
+    <para>The [BFIFO] section manages the queueing discipline (qdisc) of Byte limited Packet First In First
+    Out (bfifo).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2848,10 +2812,11 @@
       <varlistentry>
         <term><varname>LimitBytes=</varname></term>
         <listitem>
-          <para>Specifies the hard limit on the FIFO size in bytes. The size limit (a buffer size) to prevent it
-          from overflowing in case it is unable to dequeue packets as quickly as it receives them. When this limit
-          is reached, incoming packets are dropped. When suffixed with K, M, or G, the specified size is parsed as
-          Kilobytes, Megabytes, or Gigabytes, respectively, to the base of 1024. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies the hard limit on the FIFO size in bytes. The size limit (a buffer size) to prevent
+          it from overflowing in case it is unable to dequeue packets as quickly as it receives them. When
+          this limit is reached, incoming packets are dropped. When suffixed with K, M, or G, the specified
+          size is parsed as Kilobytes, Megabytes, or Gigabytes, respectively, to the base of 1024. Defaults
+          to unset and kernel's default is used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -2859,8 +2824,8 @@
 
   <refsect1>
     <title>[PFIFO] Section Options</title>
-    <para>The <literal>[PFIFO]</literal> section manages the queueing discipline (qdisc) of
-    Packet First In First Out (pfifo).</para>
+    <para>The [PFIFO] section manages the queueing discipline (qdisc) of Packet First In First Out
+    (pfifo).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2869,9 +2834,10 @@
       <varlistentry>
         <term><varname>PacketLimit=</varname></term>
         <listitem>
-          <para>Specifies the hard limit on the FIFO size in number of packets. The size limit (a buffer size) to prevent it
-          from overflowing in case it is unable to dequeue packets as quickly as it receives them. When this limit is reached,
-          incoming packets are dropped. An unsigned integer ranges 0 to 4294967294. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies the hard limit on the FIFO size in number of packets. The size limit (a buffer
+          size) to prevent it from overflowing in case it is unable to dequeue packets as quickly as it
+          receives them. When this limit is reached, incoming packets are dropped. An unsigned integer in the
+          range 0–4294967294. Defaults to unset and kernel's default is used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -2879,8 +2845,8 @@
 
   <refsect1>
     <title>[PFIFOHeadDrop] Section Options</title>
-    <para>The <literal>[PFIFOHeadDrop]</literal> section manages the queueing discipline (qdisc) of
-    Packet First In First Out Head Drop (pfifo_head_drop).</para>
+    <para>The [PFIFOHeadDrop] section manages the queueing discipline (qdisc) of Packet First In First Out
+    Head Drop (pfifo_head_drop).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2889,15 +2855,15 @@
       <varlistentry>
         <term><varname>PacketLimit=</varname></term>
         <listitem>
-          <para>As in <literal>[PFIFO]</literal> section.</para></listitem>
+          <para>As in [PFIFO] section.</para></listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 
   <refsect1>
      <title>[PFIFOFast] Section Options</title>
-     <para>The <literal>[PFIFOFast]</literal> section manages the queueing discipline (qdisc) of
-     Packet First In First Out Fast (pfifo_fast).</para>
+     <para>The [PFIFOFast] section manages the queueing discipline (qdisc) of Packet First In First Out Fast
+     (pfifo_fast).</para>
 
      <variablelist class='network-directives'>
        <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2907,8 +2873,8 @@
 
   <refsect1>
     <title>[CAKE] Section Options</title>
-    <para>The <literal>[CAKE]</literal> section manages the queueing discipline (qdisc) of
-    Common Applications Kept Enhanced (CAKE).</para>
+    <para>The [CAKE] section manages the queueing discipline (qdisc) of Common Applications Kept Enhanced
+    (CAKE).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2917,8 +2883,8 @@
       <varlistentry>
         <term><varname>OverheadBytes=</varname></term>
         <listitem>
-          <para>Specifies that bytes to be addeded to the size of each packet. Bytes may be negative.
-          Takes an integer ranges -64 to 256. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies that bytes to be addeded to the size of each packet. Bytes may be negative. Takes
+          an integer in the range from -64 to 256. Defaults to unset and kernel's default is used.</para>
         </listitem>
       </varlistentry>
 
@@ -2935,7 +2901,7 @@
 
   <refsect1>
     <title>[ControlledDelay] Section Options</title>
-    <para>The <literal>[ControlledDelay]</literal> section manages the queueing discipline (qdisc) of
+    <para>The [ControlledDelay] section manages the queueing discipline (qdisc) of
     controlled delay (CoDel).</para>
 
     <variablelist class='network-directives'>
@@ -2945,8 +2911,9 @@
       <varlistentry>
         <term><varname>PacketLimit=</varname></term>
         <listitem>
-          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached, incoming packets are
-          dropped. An unsigned integer ranges 0 to 4294967294. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached,
+          incoming packets are dropped. An unsigned integer in the range 0–4294967294. Defaults to unset and
+          kernel's default is used.</para>
         </listitem>
       </varlistentry>
 
@@ -2986,8 +2953,8 @@
 
   <refsect1>
     <title>[DeficitRoundRobinScheduler] Section Options</title>
-    <para>The <literal>[DeficitRoundRobinScheduler]</literal> section manages the queueing discipline (qdisc) of
-    Deficit Round Robin Scheduler (DRR).</para>
+    <para>The [DeficitRoundRobinScheduler] section manages the queueing discipline (qdisc) of Deficit Round
+    Robin Scheduler (DRR).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -2997,8 +2964,8 @@
 
   <refsect1>
     <title>[DeficitRoundRobinSchedulerClass] Section Options</title>
-    <para>The <literal>[DeficitRoundRobinSchedulerClass]</literal> section manages the traffic control class of
-    Deficit Round Robin Scheduler (DRR).</para>
+    <para>The [DeficitRoundRobinSchedulerClass] section manages the traffic control class of Deficit Round
+    Robin Scheduler (DRR).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="tclass-parent" />
@@ -3019,8 +2986,8 @@
 
   <refsect1>
     <title>[EnhancedTransmissionSelection] Section Options</title>
-    <para>The <literal>[EnhancedTransmissionSelection]</literal> section manages the queueing discipline (qdisc) of
-    Enhanced Transmission Selection (ETS).</para>
+    <para>The [EnhancedTransmissionSelection] section manages the queueing discipline (qdisc) of Enhanced
+    Transmission Selection (ETS).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3029,18 +2996,17 @@
       <varlistentry>
         <term><varname>Bands=</varname></term>
         <listitem>
-          <para>Specifies the number of bands. An unsigned integer ranges 1 to 16. This value has to be
-          at least large enough to cover the strict bands specified through the
-          <varname>StrictBands=</varname> and bandwidth-sharing bands specified in
-          <varname>QuantumBytes=</varname>.</para>
+          <para>Specifies the number of bands. An unsigned integer in the range 1–16. This value has to be at
+          least large enough to cover the strict bands specified through the <varname>StrictBands=</varname>
+          and bandwidth-sharing bands specified in <varname>QuantumBytes=</varname>.</para>
         </listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>StrictBands=</varname></term>
         <listitem>
-          <para>Specifies the number of bands that should be created in strict mode. An unsigned integer
-          ranges 1 to 16.</para>
+          <para>Specifies the number of bands that should be created in strict mode. An unsigned integer in
+          the range 1–16.</para>
         </listitem>
       </varlistentry>
 
@@ -3071,8 +3037,8 @@
 
   <refsect1>
     <title>[GenericRandomEarlyDetection] Section Options</title>
-    <para>The <literal>[GenericRandomEarlyDetection]</literal> section manages the queueing discipline
-    (qdisc) of Generic Random Early Detection (GRED).</para>
+    <para>The [GenericRandomEarlyDetection] section manages the queueing discipline (qdisc) of Generic Random
+    Early Detection (GRED).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3105,8 +3071,8 @@
 
   <refsect1>
     <title>[FairQueueingControlledDelay] Section Options</title>
-    <para>The <literal>[FairQueueingControlledDelay]</literal> section manages the queueing discipline
-    (qdisc) of fair queuing controlled delay (FQ-CoDel).</para>
+    <para>The [FairQueueingControlledDelay] section manages the queueing discipline (qdisc) of fair queuing
+    controlled delay (FQ-CoDel).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3156,7 +3122,7 @@
       <varlistentry>
         <term><varname>QuantumBytes=</varname></term>
         <listitem>
-          <para>Specifies the number of bytes used as 'deficit' in the fair queuing algorithmtimespan.
+          <para>Specifies the number of bytes used as the "deficit" in the fair queuing algorithm timespan.
           When suffixed with K, M, or G, the specified size is parsed as Kilobytes, Megabytes, or Gigabytes,
           respectively, to the base of 1024. Defaults to unset and kernel's default is used.</para>
         </listitem>
@@ -3182,8 +3148,8 @@
 
   <refsect1>
     <title>[FairQueueing] Section Options</title>
-    <para>The <literal>[FairQueueing]</literal> section manages the queueing discipline
-    (qdisc) of fair queue traffic policing (FQ).</para>
+    <para>The [FairQueueing] section manages the queueing discipline (qdisc) of fair queue traffic policing
+    (FQ).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3271,8 +3237,8 @@
 
   <refsect1>
     <title>[TrivialLinkEqualizer] Section Options</title>
-    <para>The <literal>[TrivialLinkEqualizer]</literal> section manages the queueing discipline (qdisc) of
-    trivial link equalizer (teql).</para>
+    <para>The [TrivialLinkEqualizer] section manages the queueing discipline (qdisc) of trivial link
+    equalizer (teql).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3292,8 +3258,8 @@
 
   <refsect1>
     <title>[HierarchyTokenBucket] Section Options</title>
-    <para>The <literal>[HierarchyTokenBucket]</literal> section manages the queueing discipline (qdisc) of
-    hierarchy token bucket (htb).</para>
+    <para>The [HierarchyTokenBucket] section manages the queueing discipline (qdisc) of hierarchy token
+    bucket (htb).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3319,8 +3285,8 @@
 
   <refsect1>
     <title>[HierarchyTokenBucketClass] Section Options</title>
-    <para>The <literal>[HierarchyTokenBucketClass]</literal> section manages the traffic control class of
-    hierarchy token bucket (htb).</para>
+    <para>The [HierarchyTokenBucketClass] section manages the traffic control class of hierarchy token bucket
+    (htb).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="tclass-parent" />
@@ -3401,8 +3367,8 @@
 
   <refsect1>
     <title>[HeavyHitterFilter] Section Options</title>
-    <para>The <literal>[HeavyHitterFilter]</literal> section manages the queueing discipline
-    (qdisc) of Heavy Hitter Filter (hhf).</para>
+    <para>The [HeavyHitterFilter] section manages the queueing discipline (qdisc) of Heavy Hitter Filter
+    (hhf).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3411,8 +3377,9 @@
       <varlistentry>
         <term><varname>PacketLimit=</varname></term>
         <listitem>
-          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached, incoming packets are
-          dropped. An unsigned integer ranges 0 to 4294967294. Defaults to unset and kernel's default is used.</para>
+          <para>Specifies the hard limit on the queue size in number of packets. When this limit is reached,
+          incoming packets are dropped. An unsigned integer in the range 0–4294967294. Defaults to unset and
+          kernel's default is used.</para>
         </listitem>
       </varlistentry>
     </variablelist>
@@ -3420,8 +3387,8 @@
 
   <refsect1>
     <title>[QuickFairQueueing] Section Options</title>
-    <para>The <literal>[QuickFairQueueing]</literal> section manages the queueing discipline
-    (qdisc) of Quick Fair Queueing (QFQ).</para>
+    <para>The [QuickFairQueueing] section manages the queueing discipline (qdisc) of Quick Fair Queueing
+    (QFQ).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="qdisc-parent" />
@@ -3431,8 +3398,8 @@
 
   <refsect1>
     <title>[QuickFairQueueingClass] Section Options</title>
-    <para>The <literal>[QuickFairQueueingClass]</literal> section manages the traffic control class of
-    Quick Fair Queueing (qfq).</para>
+    <para>The [QuickFairQueueingClass] section manages the traffic control class of Quick Fair Queueing
+    (qfq).</para>
 
     <variablelist class='network-directives'>
       <xi:include href="tc.xml" xpointer="tclass-parent" />
@@ -3459,9 +3426,9 @@
 
   <refsect1>
     <title>[BridgeVLAN] Section Options</title>
-      <para>The <literal>[BridgeVLAN]</literal> section manages the VLAN ID configuration of a bridge port and accepts
-      the following keys. Specify several <literal>[BridgeVLAN]</literal> sections to configure several VLAN entries.
-      The <varname>VLANFiltering=</varname> option has to be enabled, see <literal>[Bridge]</literal> section in
+      <para>The [BridgeVLAN] section manages the VLAN ID configuration of a bridge port and accepts the
+      following keys. Specify several [BridgeVLAN] sections to configure several VLAN entries. The
+      <varname>VLANFiltering=</varname> option has to be enabled, see the [Bridge] section in
       <citerefentry><refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
 
       <variablelist class='network-directives'>

man/systemd.nspawn.xml

@@ -80,7 +80,7 @@
   <refsect1>
     <title>[Exec] Section Options</title>
 
-    <para>Settings files may include an <literal>[Exec]</literal>
+    <para>Settings files may include an [Exec]
     section, which carries various execution parameters:</para>
 
     <variablelist class='nspawn-directives'>
@@ -344,7 +344,7 @@
   <refsect1>
     <title>[Files] Section Options</title>
 
-    <para>Settings files may include a <literal>[Files]</literal>
+    <para>Settings files may include a [Files]
     section, which carries various parameters configuring the file
     system of the container:</para>
 
@@ -405,7 +405,7 @@
       <varlistentry>
         <term><varname>Inaccessible=</varname></term>
 
-        <listitem><para>Masks the specified file or directly in the container, by over-mounting it with an empty file
+        <listitem><para>Masks the specified file or directory in the container, by over-mounting it with an empty file
         node of the same type with the most restrictive access mode. Takes a file system path as argument. This option
         may be used multiple times to mask multiple files or directories. This option is equivalent to the command line
         switch <option>--inaccessible=</option>, see
@@ -439,7 +439,7 @@
   <refsect1>
     <title>[Network] Section Options</title>
 
-    <para>Settings files may include a <literal>[Network]</literal>
+    <para>Settings files may include a [Network]
     section, which carries various parameters configuring the network
     connectivity of the container:</para>
 

man/systemd.offline-updates.xml

@@ -33,7 +33,7 @@
 
     <orderedlist>
       <listitem>
-        <para>The package manager prepares system updates by downloading all (RPM or DEB or
+        <para>The package manager prepares system updates by downloading all (.rpm or .deb or
         whatever) packages to update off-line in a special directory
         <filename index="false">/var/lib/system-update</filename> (or
         another directory of the package/upgrade manager's choice).</para>
@@ -85,8 +85,8 @@
       </listitem>
 
       <listitem>
-        <para>The upgrade scripts should exit only after the update is finished. It is expected
-        that the service which performs the upgrade will cause the machine to reboot after it
+        <para>The update scripts should exit only after the update is finished. It is expected
+        that the service which performs the update will cause the machine to reboot after it
         is done. If the <filename>system-update.target</filename> is successfully reached, i.e.
         all update services have run, and the <filename>/system-update</filename> symlink still
         exists, it will be removed and the machine rebooted as a safety measure.</para>

man/systemd.path.xml

@@ -34,9 +34,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The path specific configuration options are
-    configured in the <literal>[Path]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The path specific configuration options are
+    configured in the [Path] section.</para>
 
     <para>For each path file, a matching unit file must exist,
     describing the unit to activate when the path changes. By default,

man/systemd.scope.xml

@@ -89,7 +89,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>Scope files may include a <literal>[Scope]</literal>
+    <para>Scope files may include a [Scope]
     section, which carries information about the scope and the
     units it contains. A number of options that may be used in
     this section are shared with other unit types. These options are
@@ -97,7 +97,7 @@
     <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     and
     <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
-    The options specific to the <literal>[Scope]</literal> section
+    The options specific to the [Scope] section
     of scope units are the following:</para>
 
     <variablelist class='unit-directives'>

man/systemd.service.xml

@@ -35,9 +35,9 @@
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
     configuration items are configured in the generic
-    <literal>[Unit]</literal> and <literal>[Install]</literal>
+    [Unit] and [Install]
     sections. The service specific configuration options are
-    configured in the <literal>[Service]</literal> section.</para>
+    configured in the [Service] section.</para>
 
     <para>Additional options are listed in
     <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
@@ -138,7 +138,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>Service files must include a <literal>[Service]</literal>
+    <para>Service files must include a [Service]
     section, which carries information about the service and the
     process it supervises. A number of options that may be used in
     this section are shared with other unit types. These options are
@@ -147,7 +147,7 @@
     <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     and
     <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
-    The options specific to the <literal>[Service]</literal> section
+    The options specific to the [Service] section
     of service units are the following:</para>
 
     <variablelist class='unit-directives'>
@@ -896,7 +896,7 @@
         this option will have no effect.</para>
 
         <example>
-          <title>A service with with the <varname>SuccessExitStatus=</varname> setting</title>
+          <title>A service with the <varname>SuccessExitStatus=</varname> setting</title>
 
           <programlisting>SuccessExitStatus=TEMPFAIL 250 SIGUSR1</programlisting>
 
@@ -1495,7 +1495,7 @@ ExecStart=/usr/sbin/simple-dbus-service
 WantedBy=multi-user.target</programlisting>
 
       <para>For <emphasis>bus-activatable</emphasis> services, do not
-      include a <literal>[Install]</literal> section in the systemd
+      include a [Install] section in the systemd
       service file, but use the <varname>SystemdService=</varname>
       option in the corresponding DBus service file, for example
       (<filename>/usr/share/dbus-1/system-services/org.example.simple-dbus-service.service</filename>):</para>

man/systemd.slice.xml

@@ -55,9 +55,9 @@
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration
     files. The common configuration items are configured
-    in the generic <literal>[Unit]</literal> and <literal>[Install]</literal> sections. The
+    in the generic [Unit] and [Install] sections. The
     slice specific configuration options are configured in
-    the <literal>[Slice]</literal> section. Currently, only generic resource control settings
+    the [Slice] section. Currently, only generic resource control settings
     as described in
     <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> are allowed.
     </para>

man/systemd.socket.xml

@@ -35,9 +35,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The socket specific configuration options are
-    configured in the <literal>[Socket]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The socket specific configuration options are
+    configured in the [Socket] section.</para>
 
     <para>Additional options are listed in
     <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
@@ -117,10 +117,9 @@
         <listitem><para>Socket units automatically gain a <varname>Before=</varname>
         dependency on the service units they activate.</para></listitem>
 
-        <listitem><para>Socket units referring to file system paths (such as AF_UNIX
-        sockets or FIFOs) implicitly gain <varname>Requires=</varname> and
-        <varname>After=</varname> dependencies on all mount units
-        necessary to access those paths.</para></listitem>
+        <listitem><para>Socket units referring to file system paths (such as <constant>AF_UNIX</constant>
+        sockets or FIFOs) implicitly gain <varname>Requires=</varname> and <varname>After=</varname>
+        dependencies on all mount units necessary to access those paths.</para></listitem>
 
         <listitem><para>Socket units using the <varname>BindToDevice=</varname>
         setting automatically gain a <varname>BindsTo=</varname> and
@@ -300,7 +299,7 @@
         url="https://www.kernel.org/doc/Documentation/usb/functionfs.txt">USB
         FunctionFS</ulink> endpoints location to listen on, for
         implementation of USB gadget functions. This expects an
-        absolute file system path of functionfs mount point as the argument.
+        absolute file system path of FunctionFS mount point as the argument.
         Behavior otherwise is very similar to the <varname>ListenFIFO=</varname>
         directive above. Use this to open the FunctionFS endpoint
         <filename>ep0</filename>. When using this option, the
@@ -313,9 +312,9 @@
       <varlistentry>
         <term><varname>SocketProtocol=</varname></term>
         <listitem><para>Takes one of <option>udplite</option>
-        or <option>sctp</option>. Specifies a socket protocol
-        (<constant>IPPROTO_UDPLITE</constant>) UDP-Lite
-        (<constant>IPPROTO_SCTP</constant>) SCTP socket respectively. </para>
+        or <option>sctp</option>. The socket will use the UDP-Lite
+        (<constant>IPPROTO_UDPLITE</constant>) or SCTP
+        (<constant>IPPROTO_SCTP</constant>) protocol, respectively.</para>
         </listitem>
       </varlistentry>
 
@@ -349,16 +348,14 @@
 
       <varlistentry>
         <term><varname>BindToDevice=</varname></term>
-        <listitem><para>Specifies a network interface name to bind
-        this socket to. If set, traffic will only be accepted from the
-        specified network interfaces. This controls the
-        SO_BINDTODEVICE socket option (see <citerefentry
-        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        for details). If this option is used, an implicit dependency
-        from this socket unit on the network interface device unit
-        (<citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>
-        is created. Note that setting this parameter might result in
-        additional dependencies to be added to the unit (see
+        <listitem><para>Specifies a network interface name to bind this socket to. If set, traffic will only
+        be accepted from the specified network interfaces. This controls the
+        <constant>SO_BINDTODEVICE</constant> socket option (see <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
+        details). If this option is used, an implicit dependency from this socket unit on the network
+        interface device unit is created
+        (see <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
+        Note that setting this parameter might result in additional dependencies to be added to the unit (see
         above).</para></listitem>
       </varlistentry>
 
@@ -366,12 +363,10 @@
         <term><varname>SocketUser=</varname></term>
         <term><varname>SocketGroup=</varname></term>
 
-        <listitem><para>Takes a UNIX user/group name. When specified,
-        all AF_UNIX sockets and FIFO nodes in the file system are
-        owned by the specified user and group. If unset (the default),
-        the nodes are owned by the root user/group (if run in system
-        context) or the invoking user/group (if run in user context).
-        If only a user is specified but no group, then the group is
+        <listitem><para>Takes a UNIX user/group name. When specified, all <constant>AF_UNIX</constant>
+        sockets and FIFO nodes in the file system are owned by the specified user and group. If unset (the
+        default), the nodes are owned by the root user/group (if run in system context) or the invoking
+        user/group (if run in user context).  If only a user is specified but no group, then the group is
         derived from the user's default group.</para></listitem>
       </varlistentry>
 
@@ -420,10 +415,10 @@
         to work unmodified with systemd socket
         activation.</para>
 
-        <para>For IPv4 and IPv6 connections, the <varname>REMOTE_ADDR</varname>
-        environment variable will contain the remote IP address, and <varname>REMOTE_PORT</varname>
-        will contain the remote port. This is the same as the format used by CGI.
-        For SOCK_RAW, the port is the IP protocol.</para></listitem>
+        <para>For IPv4 and IPv6 connections, the <varname>REMOTE_ADDR</varname> environment variable will
+        contain the remote IP address, and <varname>REMOTE_PORT</varname> will contain the remote port. This
+        is the same as the format used by CGI. For <constant>SOCK_RAW</constant>, the port is the IP
+        protocol.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -456,17 +451,13 @@
 
        <varlistentry>
         <term><varname>KeepAlive=</varname></term>
-        <listitem><para>Takes a boolean argument. If true, the TCP/IP
-        stack will send a keep alive message after 2h (depending on
-        the configuration of
-        <filename>/proc/sys/net/ipv4/tcp_keepalive_time</filename>)
-        for all TCP streams accepted on this socket. This controls the
-        SO_KEEPALIVE socket option (see
-        <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        and the <ulink
-        url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP
-        Keepalive HOWTO</ulink> for details.) Defaults to
-        <option>false</option>.</para></listitem>
+        <listitem><para>Takes a boolean argument. If true, the TCP/IP stack will send a keep alive message
+        after 2h (depending on the configuration of
+        <filename>/proc/sys/net/ipv4/tcp_keepalive_time</filename>) for all TCP streams accepted on this
+        socket. This controls the <constant>SO_KEEPALIVE</constant> socket option (see <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> and
+        the <ulink url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP Keepalive
+        HOWTO</ulink> for details.) Defaults to <option>false</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -483,15 +474,12 @@
 
       <varlistentry>
         <term><varname>KeepAliveIntervalSec=</varname></term>
-        <listitem><para>Takes time (in seconds) as argument between
-        individual keepalive probes, if the socket option SO_KEEPALIVE
-        has been set on this socket. This controls
-        the TCP_KEEPINTVL socket option (see
-        <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        and the <ulink
-        url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP
-        Keepalive HOWTO</ulink> for details.) Defaults value is 75
-        seconds.</para></listitem>
+        <listitem><para>Takes time (in seconds) as argument between individual keepalive probes, if the
+        socket option <constant>SO_KEEPALIVE</constant> has been set on this socket. This controls the
+        <constant>TCP_KEEPINTVL</constant> socket option (see <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> and
+        the <ulink url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP Keepalive
+        HOWTO</ulink> for details.) Defaults value is 75 seconds.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -513,17 +501,16 @@
         algorithm works by combining a number of small outgoing
         messages, and sending them all at once. This controls the
         TCP_NODELAY socket option (see
-        <citerefentry project='die-net'><refentrytitle>tcp</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+        <citerefentry project='die-net'><refentrytitle>tcp</refentrytitle><manvolnum>7</manvolnum></citerefentry>).
         Defaults to <option>false</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>Priority=</varname></term>
-        <listitem><para>Takes an integer argument controlling the
-        priority for all traffic sent from this socket. This controls
-        the SO_PRIORITY socket option (see
-        <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        for details.).</para></listitem>
+        <listitem><para>Takes an integer argument controlling the priority for all traffic sent from this
+        socket. This controls the <constant>SO_PRIORITY</constant> socket option (see <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
+        details.).</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -559,12 +546,12 @@
       <varlistentry>
         <term><varname>ReceiveBuffer=</varname></term>
         <term><varname>SendBuffer=</varname></term>
-        <listitem><para>Takes an integer argument controlling the
-        receive or send buffer sizes of this socket, respectively.
-        This controls the SO_RCVBUF and SO_SNDBUF socket options (see
-        <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        for details.). The usual suffixes K, M, G are supported and
-        are understood to the base of 1024.</para></listitem>
+        <listitem><para>Takes an integer argument controlling the receive or send buffer sizes of this
+        socket, respectively.  This controls the <constant>SO_RCVBUF</constant> and
+        <constant>SO_SNDBUF</constant> socket options (see <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
+        details.). The usual suffixes K, M, G are supported and are understood to the base of
+        1024.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -593,23 +580,20 @@
 
       <varlistentry>
         <term><varname>Mark=</varname></term>
-        <listitem><para>Takes an integer value. Controls the firewall
-        mark of packets generated by this socket. This can be used in
-        the firewall logic to filter packets from this socket. This
-        sets the SO_MARK socket option. See
-        <citerefentry project='die-net'><refentrytitle>iptables</refentrytitle><manvolnum>8</manvolnum></citerefentry>
-        for details.</para></listitem>
+        <listitem><para>Takes an integer value. Controls the firewall mark of packets generated by this
+        socket. This can be used in the firewall logic to filter packets from this socket. This sets the
+        <constant>SO_MARK</constant> socket option. See <citerefentry
+        project='die-net'><refentrytitle>iptables</refentrytitle><manvolnum>8</manvolnum></citerefentry> for
+        details.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>ReusePort=</varname></term>
-        <listitem><para>Takes a boolean value. If true, allows
-        multiple
-        <citerefentry><refentrytitle>bind</refentrytitle><manvolnum>2</manvolnum></citerefentry>s
-        to this TCP or UDP port. This controls the SO_REUSEPORT socket
-        option. See
-        <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
-        for details.</para></listitem>
+        <listitem><para>Takes a boolean value. If true, allows multiple
+        <citerefentry><refentrytitle>bind</refentrytitle><manvolnum>2</manvolnum></citerefentry>s to this TCP
+        or UDP port. This controls the <constant>SO_REUSEPORT</constant> socket option. See <citerefentry
+        project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> for
+        details.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -685,28 +669,23 @@
 
       <varlistentry>
         <term><varname>Broadcast=</varname></term>
-        <listitem><para>Takes a boolean value. This controls the
-        SO_BROADCAST socket option, which allows broadcast datagrams
-        to be sent from this socket. Defaults to
+        <listitem><para>Takes a boolean value. This controls the <constant>SO_BROADCAST</constant> socket
+        option, which allows broadcast datagrams to be sent from this socket. Defaults to
         <option>false</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>PassCredentials=</varname></term>
-        <listitem><para>Takes a boolean value. This controls the
-        SO_PASSCRED socket option, which allows
-        <constant>AF_UNIX</constant> sockets to receive the
-        credentials of the sending process in an ancillary message.
-        Defaults to <option>false</option>.</para></listitem>
+        <listitem><para>Takes a boolean value. This controls the <constant>SO_PASSCRED</constant> socket
+        option, which allows <constant>AF_UNIX</constant> sockets to receive the credentials of the sending
+        process in an ancillary message. Defaults to <option>false</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
         <term><varname>PassSecurity=</varname></term>
-        <listitem><para>Takes a boolean value. This controls the
-        SO_PASSSEC socket option, which allows
-        <constant>AF_UNIX</constant> sockets to receive the security
-        context of the sending process in an ancillary message.
-        Defaults to <option>false</option>.</para></listitem>
+        <listitem><para>Takes a boolean value. This controls the <constant>SO_PASSSEC</constant> socket
+        option, which allows <constant>AF_UNIX</constant> sockets to receive the security context of the
+        sending process in an ancillary message.  Defaults to <option>false</option>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -720,11 +699,10 @@
 
       <varlistentry>
         <term><varname>TCPCongestion=</varname></term>
-        <listitem><para>Takes a string value. Controls the TCP
-        congestion algorithm used by this socket. Should be one of
-        "westwood", "veno", "cubic", "lp" or any other available
-        algorithm supported by the IP stack. This setting applies only
-        to stream sockets.</para></listitem>
+        <listitem><para>Takes a string value. Controls the TCP congestion algorithm used by this
+        socket. Should be one of <literal>westwood</literal>, <literal>veno</literal>,
+        <literal>cubic</literal>, <literal>lp</literal> or any other available algorithm supported by the IP
+        stack. This setting applies only to stream sockets.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -788,15 +766,12 @@
 
       <varlistentry>
         <term><varname>RemoveOnStop=</varname></term>
-        <listitem><para>Takes a boolean argument. If enabled, any file
-        nodes created by this socket unit are removed when it is
-        stopped. This applies to AF_UNIX sockets in the file system,
-        POSIX message queues, FIFOs, as well as any symlinks to them
-        configured with <varname>Symlinks=</varname>. Normally, it
-        should not be necessary to use this option, and is not
-        recommended as services might continue to run after the socket
-        unit has been terminated and it should still be possible to
-        communicate with them via their file system node. Defaults to
+        <listitem><para>Takes a boolean argument. If enabled, any file nodes created by this socket unit are
+        removed when it is stopped. This applies to <constant>AF_UNIX</constant> sockets in the file system,
+        POSIX message queues, FIFOs, as well as any symlinks to them configured with
+        <varname>Symlinks=</varname>. Normally, it should not be necessary to use this option, and is not
+        recommended as services might continue to run after the socket unit has been terminated and it should
+        still be possible to communicate with them via their file system node. Defaults to
         off.</para></listitem>
       </varlistentry>
 

man/systemd.special.xml

@@ -297,7 +297,7 @@
             this unit (or <filename>multi-user.target</filename>) during
             installation. This is best configured via
             <varname>WantedBy=graphical.target</varname> in the unit's
-            <literal>[Install]</literal> section.</para>
+            [Install] section.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -447,7 +447,7 @@
             add <varname>Wants=</varname> dependencies for their unit to
             this unit during installation. This is best configured via
             <varname>WantedBy=multi-user.target</varname> in the unit's
-            <literal>[Install]</literal> section.</para>
+            [Install] section.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -505,7 +505,7 @@
             applications get pulled in via <varname>Wants=</varname>
             dependencies from this unit. This is best configured via a
             <varname>WantedBy=paths.target</varname> in the path unit's
-            <literal>[Install]</literal> section.</para>
+            [Install] section.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -641,7 +641,7 @@
             <para>Adding slice units to <filename>slices.target</filename> is generally not
             necessary. Instead, when some unit that uses <varname>Slice=</varname> is started, the
             specified slice will be started automatically. Adding
-            <varname>WantedBy=slices.target</varname> lines to the <literal>[Install]</literal>
+            <varname>WantedBy=slices.target</varname> lines to the [Install]
             section should only be done for units that need to be always active. In that case care
             needs to be taken to avoid creating a loop through the automatic dependencies on
             "parent" slices.</para>
@@ -659,7 +659,7 @@
             <varname>Wants=</varname> dependencies to this unit for
             their socket unit during installation. This is best
             configured via a <varname>WantedBy=sockets.target</varname>
-            in the socket unit's <literal>[Install]</literal>
+            in the socket unit's [Install]
             section.</para>
           </listitem>
         </varlistentry>
@@ -742,7 +742,7 @@
             applications get pulled in via <varname>Wants=</varname>
             dependencies from this unit. This is best configured via
             <varname>WantedBy=timers.target</varname> in the timer
-            unit's <literal>[Install]</literal> section.</para>
+            unit's [Install] section.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -1043,7 +1043,7 @@
             <para>By default, all user processes and services started on
             behalf of the user, including the per-user systemd instance
             are found in this slice.  This is pulled in by
-            <filename>systemd-logind.service</filename></para>
+            <filename>systemd-logind.service</filename>.</para>
           </listitem>
         </varlistentry>
 
@@ -1053,7 +1053,7 @@
             <para>By default, all virtual machines and containers
             registered with <command>systemd-machined</command> are
             found in this slice. This is pulled in by
-            <filename>systemd-machined.service</filename></para>
+            <filename>systemd-machined.service</filename>.</para>
           </listitem>
         </varlistentry>
       </variablelist>
@@ -1104,7 +1104,7 @@
             <para>This target is active whenever any graphical session is running. It is used to
             stop user services which only apply to a graphical (X, Wayland, etc.) session when the
             session is terminated. Such services should have
-            <literal>PartOf=graphical-session.target</literal> in their <literal>[Unit]</literal>
+            <literal>PartOf=graphical-session.target</literal> in their [Unit]
             section. A target for a particular session (e. g.
             <filename>gnome-session.target</filename>) starts and stops
             <literal>graphical-session.target</literal> with

man/systemd.swap.xml

@@ -37,9 +37,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The swap specific configuration options are
-    configured in the <literal>[Swap]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The swap specific configuration options are
+    configured in the [Swap] section.</para>
 
     <para>Additional options are listed in
     <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
@@ -166,7 +166,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>Swap files must include a [Swap] section, which carries
+    <para>Swap unit files must include a [Swap] section, which carries
     information about the swap device it supervises. A number of
     options that may be used in this section are shared with other
     unit types. These options are documented in

man/systemd.syntax.xml

@@ -98,10 +98,10 @@ KeyTwo=value 2 \
        value 2 continued
 
 [Section C]
-KeyThree=value 2\
+KeyThree=value 3\
 # this line is ignored
 ; this line is ignored too
-       value 2 continued
+       value 3 continued
 </programlisting></example>
 
     <para>Boolean arguments used in configuration files can be written in

man/systemd.target.xml

@@ -34,8 +34,8 @@
     <para>This unit type has no specific options. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. A separate <literal>[Target]</literal> section does not exist,
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. A separate [Target] section does not exist,
     since no target-specific options may be configured.</para>
 
     <para>Target units do not offer any additional functionality on

man/systemd.time.xml

@@ -98,18 +98,20 @@
   <refsect1>
     <title>Parsing Timestamps</title>
 
-    <para>When parsing, systemd will accept a similar syntax, but expects no timezone specification, unless it is given
-    as the literal string <literal>UTC</literal> (for the UTC timezone), or is specified to be the locally configured
-    timezone, or the timezone name in the IANA timezone database format. The complete list of timezones
-    supported on your system can be obtained using the <literal>timedatectl list-timezones</literal>
-    (see <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>).
-    Using IANA format is recommended over local timezone names, as less prone to errors (eg: with local timezone it's possible to
-    specify daylight saving time in winter, while it's incorrect). The weekday specification is optional, but when
-    the weekday is specified, it must either be in the abbreviated (<literal>Wed</literal>) or non-abbreviated
-    (<literal>Wednesday</literal>) English language form (case does not matter), and is not subject to the locale
-    choice of the user.  Either the date, or the time part may be omitted, in which case the current date or 00:00:00,
-    respectively, is assumed. The seconds component of the time may also be omitted, in which case ":00" is
-    assumed. Year numbers may be specified in full or may be abbreviated (omitting the century).</para>
+    <para>When parsing, systemd will accept a similar syntax, but expects no timezone specification, unless
+    it is given as the literal string <literal>UTC</literal> (for the UTC timezone), or is specified to be
+    the locally configured timezone, or the timezone name in the IANA timezone database format. The complete
+    list of timezones supported on your system can be obtained using the <literal>timedatectl
+    list-timezones</literal> (see
+    <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>).  Using
+    IANA format is recommended over local timezone names, as less prone to errors (e.g. with local timezone
+    it's possible to specify daylight saving time in winter, even though that is not correct). The weekday
+    specification is optional, but when the weekday is specified, it must either be in the abbreviated
+    (<literal>Wed</literal>) or non-abbreviated (<literal>Wednesday</literal>) English language form (case
+    does not matter), and is not subject to the locale choice of the user. Either the date, or the time part
+    may be omitted, in which case the current date or 00:00:00, respectively, is assumed. The seconds
+    component of the time may also be omitted, in which case ":00" is assumed. Year numbers may be specified
+    in full or may be abbreviated (omitting the century).</para>
 
     <para>A timestamp is considered invalid if a weekday is specified and the date does not match the specified day of
     the week.</para>
@@ -282,7 +284,7 @@ Wed..Sat,Tue 12-10-15 1:2:3 → Tue..Sat 2012-10-15 01:02:03
       <para>Use the <command>calendar</command> command of
       <citerefentry><refentrytitle>systemd-analyze</refentrytitle><manvolnum>1</manvolnum></citerefentry> to validate
       and normalize calendar time specifications for testing purposes. The tool also calculates when a specified
-      calendar event would elapse next.</para>
+      calendar event would occur next.</para>
   </refsect1>
 
   <refsect1>

man/systemd.timer.xml

@@ -35,9 +35,9 @@
     this unit type. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
     for the common options of all unit configuration files. The common
-    configuration items are configured in the generic <literal>[Unit]</literal> and
-    <literal>[Install]</literal> sections. The timer specific configuration options are
-    configured in the <literal>[Timer]</literal> section.</para>
+    configuration items are configured in the generic [Unit] and
+    [Install] sections. The timer specific configuration options are
+    configured in the [Timer] section.</para>
 
     <para>For each timer file, a matching unit file must exist,
     describing the unit to activate when the timer elapses. By

man/systemd.unit.xml

@@ -737,7 +737,7 @@
         that the listed unit is fully started up before the configured unit is started.</para>
 
         <para>When two units with an ordering dependency between them are shut down, the inverse of the
-        start-up order is applied. i.e. if a unit is configured with <varname>After=</varname> on another
+        start-up order is applied. I.e. if a unit is configured with <varname>After=</varname> on another
         unit, the former is stopped before the latter if both are shut down. Given two units with any
         ordering dependency between them, if one unit is shut down and the other is started up, the shutdown
         is ordered before the start-up. It doesn't matter if the ordering dependency is
@@ -833,7 +833,7 @@
         <option>--job-mode=</option> option for details on the
         possible values. If this is set to <literal>isolate</literal>,
         only a single unit may be listed in
-        <varname>OnFailure=</varname>..</para></listitem>
+        <varname>OnFailure=</varname>.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -1028,8 +1028,8 @@
 
         <listitem><para>Configure an additional action to take if the rate limit configured with
         <varname>StartLimitIntervalSec=</varname> and <varname>StartLimitBurst=</varname> is hit. Takes the same
-        values as the setting <varname>FailureAction=</varname>/<varname>SuccessAction=</varname> settings and executes
-        the same actions. If <option>none</option> is set, hitting the rate limit will trigger no action besides that
+        values as the <varname>FailureAction=</varname>/<varname>SuccessAction=</varname> settings. If
+        <option>none</option> is set, hitting the rate limit will trigger no action except that
         the start will not be permitted. Defaults to <option>none</option>.</para></listitem>
       </varlistentry>
 
@@ -1639,7 +1639,7 @@
   <refsect1>
     <title>[Install] Section Options</title>
 
-    <para>Unit files may include an <literal>[Install]</literal> section, which carries installation information for
+    <para>Unit files may include an [Install] section, which carries installation information for
     the unit. This section is not interpreted by
     <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> during runtime; it is
     used by the <command>enable</command> and <command>disable</command> commands of the

man/systemd.xml

@@ -760,13 +760,11 @@
       <varlistentry>
         <term><varname>systemd.crash_chvt</varname></term>
 
-        <listitem><para>Takes a positive integer, or a boolean argument. Can be also
-        specified without an argument, with the same effect as a positive boolean. If
-        a positive integer (in the range 1–63) is specified, the system manager (PID
-        1) will activate the specified virtual terminal (VT) when it
-        crashes. Defaults to disabled, meaning that no such switch is attempted. If
-        set to enabled, the VT the kernel messages are written to is selected.
-        </para></listitem>
+        <listitem><para>Takes a positive integer, or a boolean argument. Can be also specified without an
+        argument, with the same effect as a positive boolean. If a positive integer (in the range 1–63) is
+        specified, the system manager (PID 1) will activate the specified virtual terminal when it crashes.
+        Defaults to disabled, meaning that no such switch is attempted. If set to enabled, the virtual
+        terminal the kernel messages are written to is used instead.</para></listitem>
       </varlistentry>
 
       <varlistentry>
@@ -1089,14 +1087,15 @@
       this context, because they are properly namespaced. When an option is specified both on the kernel
       command line, and as a normal command line argument, the latter has higher precedence.</para>
 
-      <para>When <command>systemd</command> is used a user manager, the kernel command line is ignored and
+      <para>When <command>systemd</command> is used as a user manager, the kernel command line is ignored and
       the options described are understood. Nevertheless, <command>systemd</command> is usually started in
       this mode through the
       <citerefentry><refentrytitle>user@.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
       service, which is shared between all users, and it may be more convenient to use configuration files to
       modify settings, see
       <citerefentry><refentrytitle>systemd-user.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
-      or a drop-in that specifies one of the environment variables listed above in "Environment, see
+      or a drop-in that specifies one of the environment variables listed above in the Environment section,
+      see
       <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
 
       <variablelist>
@@ -1146,8 +1145,8 @@
         <varlistentry>
           <term><option>--show-status</option></term>
 
-          <listitem><para>Show terse unit status information is shown on the console during boot-up and
-          shutdown. See <varname>systemd.show_status</varname> above.</para></listitem>
+          <listitem><para>Show terse unit status information on the console during boot-up and shutdown. See
+          <varname>systemd.show_status</varname> above.</para></listitem>
         </varlistentry>
 
         <varlistentry>

man/tc.xml

@@ -10,27 +10,28 @@
     <varlistentry id='qdisc-parent'>
       <term><varname>Parent=</varname></term>
       <listitem>
-        <para>Specifies the parent Queueing Discipline (qdisc). Takes one of <literal>root</literal>,
-        <literal>clsact</literal>, <literal>ingress</literal> or a class id. The class id takes the
-        major and minor number in hexadecimal ranges 1 to ffff separated with a colon
-        (<literal>major:minor</literal>). Defaults to <literal>root</literal>.</para>
+        <para>Configures the parent Queueing Discipline (qdisc). Takes one of <literal>root</literal>,
+        <literal>clsact</literal>, <literal>ingress</literal> or a class identifier. The class identifier is
+        specified as the major and minor numbers in hexadecimal in the range 0x1–Oxffff separated with a
+        colon (<literal>major:minor</literal>). Defaults to <literal>root</literal>.</para>
       </listitem>
     </varlistentry>
 
     <varlistentry id='qdisc-handle'>
       <term><varname>Handle=</varname></term>
       <listitem>
-        <para>Specifies the major number of unique identifier of the qdisc, known as the handle.
-        Takes a number in hexadecimal ranges 1 to ffff. Defaults to unset.</para>
+        <para>Configures the major number of unique identifier of the qdisc, known as the handle.
+        Takes a hexadecimal number in the range 0x1–0xffff. Defaults to unset.</para>
       </listitem>
     </varlistentry>
 
     <varlistentry id='tclass-parent'>
       <term><varname>Parent=</varname></term>
       <listitem>
-        <para>Specifies the parent Queueing Discipline (qdisc). Takes one of <literal>root</literal>,
-        or a qdisc id. The qdisc id takes the major and minor number in hexadecimal ranges 1 to ffff
-        separated with a colon (<literal>major:minor</literal>). Defaults to <literal>root</literal>.
+        <para>Configures the parent Queueing Discipline (qdisc). Takes one of <literal>root</literal>, or a
+        qdisc identifier. The qdisc identifier is specified as the major and minor numbers in hexadecimal in
+        the range 0x1–Oxffff separated with a colon (<literal>major:minor</literal>). Defaults to
+        <literal>root</literal>.
         </para>
       </listitem>
     </varlistentry>
@@ -38,8 +39,9 @@
     <varlistentry id='tclass-classid'>
       <term><varname>ClassId=</varname></term>
       <listitem>
-        <para>Specifies the major and minur number of unique identifier of the class, known as the
-        class ID. Each number is in hexadecimal ranges 1 to ffff. Defaults to unset.</para>
+        <para>Configues the unique identifier of the class. It is specified as the major and minor numbers in
+        hexadecimal in the range 0x1–Oxffff separated with a colon (<literal>major:minor</literal>).
+        Defaults to unset.</para>
       </listitem>
     </varlistentry>
   </variablelist>

man/timesyncd.conf.xml

@@ -41,7 +41,7 @@
   <refsect1>
     <title>Options</title>
 
-    <para>The following settings are configured in the <literal>[Time]</literal> section:</para>
+    <para>The following settings are configured in the [Time] section:</para>
 
     <variablelist class='network-directives'>
 

man/userdbctl.xml

@@ -163,11 +163,10 @@
     <title>Well-Known Services</title>
 
     <para>The <command>userdbctl services</command> command will list all currently running services that
-    provide user or group definitions to the system. The following are well-known services are shown among
-    this list.</para>
+    provide user or group definitions to the system. The following well-known services are shown among
+    this list:</para>
 
     <variablelist>
-
       <varlistentry>
         <term><constant>io.systemd.DynamicUser</constant></term>
 

src/basic/unit-name.c

@@ -537,8 +537,7 @@ int unit_name_from_path(const char *path, const char *suffix, char **ret) {
 }
 
 int unit_name_from_path_instance(const char *prefix, const char *path, const char *suffix, char **ret) {
-        _cleanup_free_ char *p = NULL;
-        char *s;
+        _cleanup_free_ char *p = NULL, *s = NULL;
         int r;
 
         assert(prefix);
@@ -564,7 +563,7 @@ int unit_name_from_path_instance(const char *prefix, const char *path, const cha
         if (!unit_name_is_valid(s, UNIT_NAME_INSTANCE))
                 return -EINVAL;
 
-        *ret = s;
+        *ret = TAKE_PTR(s);
         return 0;
 }
 

src/basic/user-util.c

@@ -777,7 +777,7 @@ bool valid_user_group_name(const char *u, ValidUserFlags flags) {
                         return false;
 
                 if (in_charset(u, "0123456789")) /* Don't allow fully numeric strings, they might be confused
-                                                  * with with UIDs (note that this test is more broad than
+                                                  * with UIDs (note that this test is more broad than
                                                   * the parse_uid() test above, as it will cover more than
                                                   * the 32bit range, and it will detect 65535 (which is in
                                                   * invalid UID, even though in the unsigned 32 bit range) */

src/home/homectl.c

@@ -142,12 +142,12 @@ static int list_homes(int argc, char *argv[], void *userdata) {
                                    TABLE_UID, uid,
                                    TABLE_GID, gid);
                 if (r < 0)
-                        return log_error_errno(r, "Failed to add row to table: %m");
+                        return table_log_add_error(r);
 
 
                 r = table_add_cell(table, &cell, TABLE_STRING, state);
                 if (r < 0)
-                        return log_error_errno(r, "Failed to add field to table: %m");
+                        return table_log_add_error(r);
 
                 color = user_record_state_color(state);
                 if (color)
@@ -158,7 +158,7 @@ static int list_homes(int argc, char *argv[], void *userdata) {
                                    TABLE_STRING, home,
                                    TABLE_STRING, strna(empty_to_null(shell)));
                 if (r < 0)
-                        return log_error_errno(r, "Failed to add row to table: %m");
+                        return table_log_add_error(r);
         }
 
         r = sd_bus_message_exit_container(reply);

src/home/homed.c

@@ -13,8 +13,8 @@
 #include "signal-util.h"
 
 static int run(int argc, char *argv[]) {
-        _cleanup_(notify_on_cleanup) const char *notify_stop = NULL;
         _cleanup_(manager_freep) Manager *m = NULL;
+        _cleanup_(notify_on_cleanup) const char *notify_stop = NULL;
         int r;
 
         log_setup_service();

src/initctl/initctl.c

@@ -14,12 +14,14 @@
 #include "alloc-util.h"
 #include "bus-error.h"
 #include "bus-util.h"
+#include "daemon-util.h"
 #include "def.h"
 #include "fd-util.h"
 #include "format-util.h"
 #include "initreq.h"
 #include "list.h"
 #include "log.h"
+#include "main-func.h"
 #include "memory-util.h"
 #include "process-util.h"
 #include "special.h"
@@ -68,11 +70,9 @@ static const char *translate_runlevel(int runlevel, bool *isolate) {
                 { '6', SPECIAL_REBOOT_TARGET,     false },
         };
 
-        unsigned i;
-
         assert(isolate);
 
-        for (i = 0; i < ELEMENTSOF(table); i++)
+        for (size_t i = 0; i < ELEMENTSOF(table); i++)
                 if (table[i].runlevel == runlevel) {
                         *isolate = table[i].isolate;
                         if (runlevel == '6' && kexec_loaded())
@@ -228,6 +228,7 @@ static void fifo_free(Fifo *f) {
 
         free(f);
 }
+DEFINE_TRIVIAL_CLEANUP_FUNC(Fifo*, fifo_free);
 
 static void server_done(Server *s) {
         assert(s);
@@ -241,79 +242,49 @@ static void server_done(Server *s) {
 
 static int server_init(Server *s, unsigned n_sockets) {
         int r;
-        unsigned i;
+
+        /* This function will leave s partially initialized on failure. Caller needs to clean up. */
 
         assert(s);
         assert(n_sockets > 0);
 
-        *s = (struct Server) {
-                .epoll_fd = epoll_create1(EPOLL_CLOEXEC),
-        };
+        s->epoll_fd = epoll_create1(EPOLL_CLOEXEC);
+        if (s->epoll_fd < 0)
+                return log_error_errno(errno, "Failed to create epoll object: %m");
 
-        if (s->epoll_fd < 0) {
-                r = log_error_errno(errno,
-                                    "Failed to create epoll object: %m");
-                goto fail;
-        }
-
-        for (i = 0; i < n_sockets; i++) {
-                Fifo *f;
-                int fd;
-
-                fd = SD_LISTEN_FDS_START+i;
+        for (unsigned i = 0; i < n_sockets; i++) {
+                _cleanup_(fifo_freep) Fifo *f = NULL;
+                int fd = SD_LISTEN_FDS_START + i;
 
                 r = sd_is_fifo(fd, NULL);
-                if (r < 0) {
-                        log_error_errno(r, "Failed to determine file descriptor type: %m");
-                        goto fail;
-                }
-
-                if (!r) {
-                        log_error("Wrong file descriptor type.");
-                        r = -EINVAL;
-                        goto fail;
-                }
+                if (r < 0)
+                        return log_error_errno(r, "Failed to determine file descriptor type: %m");
+                if (!r)
+                        return log_error_errno(SYNTHETIC_ERRNO(EINVAL), "Wrong file descriptor type.");
 
                 f = new0(Fifo, 1);
-                if (!f) {
-                        r = -ENOMEM;
-                        log_error_errno(errno, "Failed to create fifo object: %m");
-                        goto fail;
-                }
-
-                f->fd = -1;
+                if (!f)
+                        return log_oom();
 
                 struct epoll_event ev = {
                         .events = EPOLLIN,
                         .data.ptr = f,
                 };
 
-                if (epoll_ctl(s->epoll_fd, EPOLL_CTL_ADD, fd, &ev) < 0) {
-                        r = -errno;
-                        fifo_free(f);
-                        log_error_errno(errno, "Failed to add fifo fd to epoll object: %m");
-                        goto fail;
-                }
+                if (epoll_ctl(s->epoll_fd, EPOLL_CTL_ADD, fd, &ev) < 0)
+                        return log_error_errno(errno, "Failed to add fifo fd to epoll object: %m");
 
                 f->fd = fd;
-                LIST_PREPEND(fifo, s->fifos, f);
                 f->server = s;
+                LIST_PREPEND(fifo, s->fifos, TAKE_PTR(f));
                 s->n_fifos++;
         }
 
         r = bus_connect_system_systemd(&s->bus);
-        if (r < 0) {
-                log_error_errno(r, "Failed to get D-Bus connection: %m");
-                r = -EIO;
-                goto fail;
-        }
+        if (r < 0)
+                return log_error_errno(r, "Failed to get D-Bus connection: %m");
 
         return 0;
-
-fail:
-        server_done(s);
-
-        return r;
 }
 
 static int process_event(Server *s, struct epoll_event *ev) {
@@ -337,43 +308,33 @@ static int process_event(Server *s, struct epoll_event *ev) {
         return 0;
 }
 
-int main(int argc, char *argv[]) {
-        Server server;
-        int r = EXIT_FAILURE, n;
+static int run(int argc, char *argv[]) {
+        _cleanup_(server_done) Server server = { .epoll_fd = -1 };
+        _cleanup_(notify_on_cleanup) const char *notify_stop = NULL;
+        int r, n;
 
-        if (getppid() != 1) {
-                log_error("This program should be invoked by init only.");
-                return EXIT_FAILURE;
-        }
-
-        if (argc > 1) {
-                log_error("This program does not take arguments.");
-                return EXIT_FAILURE;
-        }
+        if (argc > 1)
+                return log_error_errno(SYNTHETIC_ERRNO(EINVAL),
+                                       "This program does not take arguments.");
 
         log_setup_service();
 
         umask(0022);
 
         n = sd_listen_fds(true);
-        if (n < 0) {
-                log_error_errno(r, "Failed to read listening file descriptors from environment: %m");
-                return EXIT_FAILURE;
-        }
+        if (n < 0)
+                return log_error_errno(errno,
+                                       "Failed to read listening file descriptors from environment: %m");
 
-        if (n <= 0 || n > SERVER_FD_MAX) {
-                log_error("No or too many file descriptors passed.");
-                return EXIT_FAILURE;
-        }
+        if (n <= 0 || n > SERVER_FD_MAX)
+                return log_error_errno(SYNTHETIC_ERRNO(EINVAL),
+                                       "No or too many file descriptors passed.");
 
-        if (server_init(&server, (unsigned) n) < 0)
-                return EXIT_FAILURE;
+        r = server_init(&server, (unsigned) n);
+        if (r < 0)
+                return r;
 
-        log_debug("systemd-initctl running as pid "PID_FMT, getpid_cached());
-
-        sd_notify(false,
-                  "READY=1\n"
-                  "STATUS=Processing requests...");
+        notify_stop = notify_start(NOTIFY_READY, NOTIFY_STOPPING);
 
         while (!server.quit) {
                 struct epoll_event event;
@@ -383,27 +344,17 @@ int main(int argc, char *argv[]) {
                 if (k < 0) {
                         if (errno == EINTR)
                                 continue;
-                        log_error_errno(errno, "epoll_wait() failed: %m");
-                        goto fail;
+                        return log_error_errno(errno, "epoll_wait() failed: %m");
                 }
-
-                if (k <= 0)
+                if (k == 0)
                         break;
 
-                if (process_event(&server, &event) < 0)
-                        goto fail;
+                r = process_event(&server, &event);
+                if (r < 0)
+                        return r;
         }
 
-        r = EXIT_SUCCESS;
-
-        log_debug("systemd-initctl stopped as pid "PID_FMT, getpid_cached());
-
-fail:
-        sd_notify(false,
-                  "STOPPING=1\n"
-                  "STATUS=Shutting down...");
-
-        server_done(&server);
-
-        return r;
+        return 0;
 }
+
+DEFINE_MAIN_FUNCTION(run);

src/journal-remote/journal-remote-main.c

@@ -1104,8 +1104,8 @@ static int load_certificates(char **key, char **cert, char **trust) {
 }
 
 static int run(int argc, char **argv) {
-        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         _cleanup_(journal_remote_server_destroy) RemoteServer s = {};
+        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         _cleanup_free_ char *key = NULL, *cert = NULL, *trust = NULL;
         int r;
 

src/journal-remote/journal-upload.c

@@ -815,8 +815,8 @@ static int open_journal(sd_journal **j) {
 }
 
 static int run(int argc, char **argv) {
-        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         _cleanup_(destroy_uploader) Uploader u = {};
+        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         bool use_journal;
         int r;
 

src/journal/journal-file.c

@@ -625,7 +625,7 @@ int journal_file_fstat(JournalFile *f) {
 
         f->last_stat_usec = now(CLOCK_MONOTONIC);
 
-        /* Refuse dealing with with files that aren't regular */
+        /* Refuse dealing with files that aren't regular */
         r = stat_verify_regular(&f->last_stat);
         if (r < 0)
                 return r;

src/libsystemd/sd-bus/bus-internal.h

@@ -43,7 +43,7 @@ struct match_callback {
 
         unsigned last_iteration;
 
-        /* Don't dispatch this slot with with messages that arrived in any iteration before or at the this
+        /* Don't dispatch this slot with messages that arrived in any iteration before or at the this
          * one. We use this to ensure that matches don't apply "retroactively" and thus can confuse the
          * caller: matches will only match incoming messages from the moment on the match was installed. */
         uint64_t after;

src/login/logind-core.c

@@ -4,9 +4,6 @@
 #include <sys/ioctl.h>
 #include <sys/types.h>
 #include <linux/vt.h>
-#if ENABLE_UTMP
-#include <utmpx.h>
-#endif
 
 #include "sd-device.h"
 
@@ -29,6 +26,7 @@
 #include "udev-util.h"
 #include "user-util.h"
 #include "userdb.h"
+#include "utmp-wtmp.h"
 
 void manager_reset_config(Manager *m) {
         assert(m);
@@ -685,13 +683,14 @@ bool manager_all_buttons_ignored(Manager *m) {
 int manager_read_utmp(Manager *m) {
 #if ENABLE_UTMP
         int r;
+        _cleanup_(utxent_cleanup) bool utmpx = false;
 
         assert(m);
 
         if (utmpxname(_PATH_UTMPX) < 0)
                 return log_error_errno(errno, "Failed to set utmp path to " _PATH_UTMPX ": %m");
 
-        setutxent();
+        utmpx = utxent_start();
 
         for (;;) {
                 _cleanup_free_ char *t = NULL;
@@ -704,8 +703,7 @@ int manager_read_utmp(Manager *m) {
                 if (!u) {
                         if (errno != 0)
                                 log_warning_errno(errno, "Failed to read " _PATH_UTMPX ", ignoring: %m");
-                        r = 0;
-                        break;
+                        return 0;
                 }
 
                 if (u->ut_type != USER_PROCESS)
@@ -715,18 +713,14 @@ int manager_read_utmp(Manager *m) {
                         continue;
 
                 t = strndup(u->ut_line, sizeof(u->ut_line));
-                if (!t) {
-                        r = log_oom();
-                        break;
-                }
+                if (!t)
+                        return log_oom();
 
                 c = path_startswith(t, "/dev/");
                 if (c) {
                         r = free_and_strdup(&t, c);
-                        if (r < 0) {
-                                log_oom();
-                                break;
-                        }
+                        if (r < 0)
+                                return log_oom();
                 }
 
                 if (isempty(t))
@@ -756,8 +750,6 @@ int manager_read_utmp(Manager *m) {
                 log_debug("Acquired TTY information '%s' from utmp for session '%s'.", s->tty, s->id);
         }
 
-        endutxent();
-        return r;
 #else
         return 0;
 #endif

src/network/networkd.c

@@ -17,8 +17,8 @@
 #include "user-util.h"
 
 static int run(int argc, char *argv[]) {
-        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         _cleanup_(manager_freep) Manager *m = NULL;
+        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         int r;
 
         log_setup_service();

src/network/tc/ets.c

@@ -283,7 +283,7 @@ int config_parse_ets_prio(
                                    lvalue, word);
                         continue;
                 }
-                if (ets->n_quanta > TC_PRIO_MAX) {
+                if (ets->n_prio > TC_PRIO_MAX) {
                         log_syntax(unit, LOG_ERR, filename, line, 0,
                                    "Too many priomap in '%s=', ignoring assignment: %s",
                                    lvalue, word);

src/network/wait-online/wait-online.c

@@ -183,8 +183,8 @@ static int parse_argv(int argc, char *argv[]) {
 }
 
 static int run(int argc, char *argv[]) {
-        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         _cleanup_(manager_freep) Manager *m = NULL;
+        _cleanup_(notify_on_cleanup) const char *notify_message = NULL;
         int r;
 
         log_setup_service();

src/partition/repart.c

@@ -1666,7 +1666,7 @@ static int context_dump_partitions(Context *context, const char *node) {
                                 TABLE_UINT64, p->new_padding,
                                 TABLE_STRING, padding_change, TABLE_SET_COLOR, !p->partitions_next && sum_padding > 0 ? ansi_underline() : NULL);
                 if (r < 0)
-                        return log_error_errno(r, "Failed to add row to table: %m");
+                        return table_log_add_error(r);
         }
 
         if (sum_padding > 0 || sum_size > 0) {
@@ -1689,7 +1689,7 @@ static int context_dump_partitions(Context *context, const char *node) {
                                 TABLE_EMPTY,
                                 TABLE_STRING, b);
                 if (r < 0)
-                        return log_error_errno(r, "Failed to add row to table: %m");
+                        return table_log_add_error(r);
         }
 
         r = table_print(t, stdout);

src/resolve/resolved.c

@@ -22,8 +22,8 @@
 #include "user-util.h"
 
 static int run(int argc, char *argv[]) {
-        _cleanup_(notify_on_cleanup) const char *notify_stop = NULL;
         _cleanup_(manager_freep) Manager *m = NULL;
+        _cleanup_(notify_on_cleanup) const char *notify_stop = NULL;
         int r;
 
         log_setup_service();

src/shared/user-record.h

@@ -202,7 +202,7 @@ typedef struct Fido2HmacSalt {
         void *salt;
         size_t salt_size;
 
-        /* What to test the hashed salt value against, usualy UNIX password hash here. */
+        /* What to test the hashed salt value against, usually UNIX password hash here. */
         char *hashed_password;
 } Fido2HmacSalt;
 

src/shared/utmp-wtmp.c

@@ -25,8 +25,8 @@
 #include "utmp-wtmp.h"
 
 int utmp_get_runlevel(int *runlevel, int *previous) {
+        _cleanup_(utxent_cleanup) bool utmpx = false;
         struct utmpx *found, lookup = { .ut_type = RUN_LVL };
-        int r;
         const char *e;
 
         assert(runlevel);
@@ -35,8 +35,7 @@ int utmp_get_runlevel(int *runlevel, int *previous) {
          * precedence. Presumably, sysvinit does this to work around a
          * race condition that would otherwise exist where we'd always
          * go to disk and hence might read runlevel data that might be
-         * very new and does not apply to the current script being
-         * executed. */
+         * very new and not apply to the current script being executed. */
 
         e = getenv("RUNLEVEL");
         if (e && e[0] > 0) {
@@ -58,27 +57,17 @@ int utmp_get_runlevel(int *runlevel, int *previous) {
         if (utmpxname(_PATH_UTMPX) < 0)
                 return -errno;
 
-        setutxent();
+        utmpx = utxent_start();
 
         found = getutxid(&lookup);
         if (!found)
-                r = -errno;
-        else {
-                int a, b;
+                return -errno;
 
-                a = found->ut_pid & 0xFF;
-                b = (found->ut_pid >> 8) & 0xFF;
-
-                *runlevel = a;
+        *runlevel = found->ut_pid & 0xFF;
         if (previous)
-                        *previous = b;
+                *previous = (found->ut_pid >> 8) & 0xFF;
 
-                r = 0;
-        }
-
-        endutxent();
-
-        return r;
+        return 0;
 }
 
 static void init_timestamp(struct utmpx *store, usec_t t) {
@@ -106,7 +95,7 @@ static void init_entry(struct utmpx *store, usec_t t) {
 }
 
 static int write_entry_utmp(const struct utmpx *store) {
-        int r;
+        _cleanup_(utxent_cleanup) bool utmpx = false;
 
         assert(store);
 
@@ -117,26 +106,35 @@ static int write_entry_utmp(const struct utmpx *store) {
         if (utmpxname(_PATH_UTMPX) < 0)
                 return -errno;
 
-        setutxent();
+        utmpx = utxent_start();
 
-        if (!pututxline(store))
-                r = -errno;
-        else
-                r = 0;
-
-        endutxent();
-
-        return r;
+        if (pututxline(store))
+                return 0;
+        if (errno == ENOENT) {
+                /* If utmp/wtmp have been disabled, that's a good thing, hence ignore the error. */
+                log_debug_errno(errno, "Not writing utmp: %m");
+                return 0;
+        }
+        return -errno;
 }
 
 static int write_entry_wtmp(const struct utmpx *store) {
         assert(store);
 
         /* wtmp is a simple append-only file where each entry is
-        simply appended to the end; i.e. basically a log. */
+         * simply appended to the end; i.e. basically a log. */
 
         errno = 0;
         updwtmpx(_PATH_WTMPX, store);
+        if (errno == ENOENT) {
+                /* If utmp/wtmp have been disabled, that's a good thing, hence ignore the error. */
+                log_debug_errno(errno, "Not writing wtmp: %m");
+                return 0;
+        }
+        if (errno == EROFS) {
+                log_warning_errno(errno, "Failed to write wtmp record, ignoring: %m");
+                return 0;
+        }
         return -errno;
 }
 
@@ -145,16 +143,7 @@ static int write_utmp_wtmp(const struct utmpx *store_utmp, const struct utmpx *s
 
         r = write_entry_utmp(store_utmp);
         s = write_entry_wtmp(store_wtmp);
-
-        if (r >= 0)
-                r = s;
-
-        /* If utmp/wtmp have been disabled, that's a good thing, hence
-         * ignore the errors */
-        if (r == -ENOENT)
-                r = 0;
-
-        return r;
+        return r < 0 ? r : s;
 }
 
 static int write_entry_both(const struct utmpx *store) {