man/loader.conf.xml

@@ -165,7 +165,7 @@
         variable is set, and then derive the random seed to pass to the OS from the combination. If
         <literal>always</literal> the boot loader will do so even if <varname>LoaderSystemToken</varname> is
         not set. This mode is useful in environments where protection against OS image reuse is not a
-        concern, and the random seed shall be used even with no further setup in place. Use <command>bootctl
+        concern, and the random seed shall be used even with no further setup in place. User <command>bootctl
         random-seed</command> to initialize both the random seed file in the ESP and the system token EFI
         variable.</para>
 

man/rules/meson.build

@@ -332,7 +332,6 @@ manpages = [
    'sd_bus_release_name_async',
    'sd_bus_request_name_async'],
   ''],
- ['sd_bus_send', '3', [], ''],
  ['sd_bus_set_address', '3', ['sd_bus_get_address'], ''],
  ['sd_bus_set_close_on_exit', '3', ['sd_bus_get_close_on_exit'], ''],
  ['sd_bus_set_connected_signal', '3', ['sd_bus_get_connected_signal'], ''],

man/sd-bus.xml

@@ -89,7 +89,6 @@
 <citerefentry><refentrytitle>sd_bus_reply_method_return</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
 <citerefentry><refentrytitle>sd_bus_reply_method_error</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
 <citerefentry><refentrytitle>sd_bus_request_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-<citerefentry><refentrytitle>sd_bus_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
 <citerefentry><refentrytitle>sd_bus_set_address</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
 <citerefentry><refentrytitle>sd_bus_set_connected_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
 <citerefentry><refentrytitle>sd_bus_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>,

man/sd_bus_call.xml

@@ -128,14 +128,14 @@
         <varlistentry>
           <term><constant>-ENOTCONN</constant></term>
 
-          <listitem><para>The input parameter <parameter>bus</parameter> is
+          <listitem><para>The bus parameter <parameter>bus</parameter> is <constant>NULL</constant>
-          <constant>NULL</constant> or the bus is not connected.</para></listitem>
+          or the bus is not connected.</para></listitem>
         </varlistentry>
 
         <varlistentry>
           <term><constant>-ECONNRESET</constant></term>
 
-          <listitem><para>The bus connection was closed while waiting for the response.
+          <listitem><para>The client was disconnected while waiting for the response.
           </para></listitem>
         </varlistentry>
 

man/sd_bus_send.xml

@@ -1,136 +0,0 @@
-<?xml version='1.0'?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-<!-- SPDX-License-Identifier: LGPL-2.1+ -->
-
-<refentry id="sd_bus_send"
-          xmlns:xi="http://www.w3.org/2001/XInclude">
-
-  <refentryinfo>
-    <title>sd_bus_send</title>
-    <productname>systemd</productname>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle>sd_bus_send</refentrytitle>
-    <manvolnum>3</manvolnum>
-  </refmeta>
-
-  <refnamediv>
-    <refname>sd_bus_send</refname>
-
-    <refpurpose>Queue a D-Bus message for transfer</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcsynopsisinfo>#include &lt;systemd/sd-bus.h&gt;</funcsynopsisinfo>
-
-      <funcprototype>
-        <funcdef>int <function>sd_bus_send</function></funcdef>
-        <paramdef>sd_bus *<parameter>bus</parameter></paramdef>
-        <paramdef>sd_bus_message *<parameter>m</parameter></paramdef>
-        <paramdef>uint64_t *<parameter>cookie</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para><function>sd_bus_send()</function> queues the bus message object <parameter>m</parameter>
-    for transfer. If <parameter>bus</parameter> is <constant>NULL</constant>, the bus that
-    <parameter>m</parameter> is attached to is used. <parameter>bus</parameter> only needs to be set
-    when the message is sent to a different bus than the one it's attached to, for example when
-    forwarding messages. If the output parameter <parameter>cookie</parameter> is not
-    <constant>NULL</constant>, it is set to the message identifier. This value can later be used to
-    match incoming replies to their corresponding messages. If <parameter>cookie</parameter> is set
-    to <constant>NULL</constant> and the message is not sealed, <function>sd_bus_send()</function>
-    assumes the message <parameter>m</parameter> doesn't expect a reply and adds the necessary
-    headers to indicate this.</para>
-
-    <para>Note that in most scenarios, <function>sd_bus_send()</function> should not be called
-    directly. Instead, use higher level functions such as
-    <citerefentry><refentrytitle>sd_bus_call_method</refentrytitle><manvolnum>3</manvolnum></citerefentry> and
-    <citerefentry><refentrytitle>sd_bus_reply_method_return</refentrytitle><manvolnum>3</manvolnum></citerefentry>
-    which call <function>sd_bus_send()</function> internally.</para>
-  </refsect1>
-
-  <refsect1>
-    <title>Return Value</title>
-
-    <para>On success, this function returns a non-negative integer. On failure, it returns a
-    negative errno-style error code.</para>
-
-    <refsect2 id='errors'>
-      <title>Errors</title>
-
-      <para>Returned errors may indicate the following problems:</para>
-
-      <variablelist>
-        <varlistentry>
-          <term><constant>-EINVAL</constant></term>
-
-          <listitem><para>The input parameter <parameter>m</parameter> is <constant>NULL</constant>.
-          </para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-EOPNOTSUPP</constant></term>
-
-          <listitem><para>The bus connection does not support sending file descriptors.
-          </para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-ECHILD</constant></term>
-
-          <listitem><para>The bus connection was allocated in a parent process and is being reused
-          in a child process after <function>fork()</function>.</para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-ENOBUFS</constant></term>
-
-          <listitem><para>The bus connection's write queue is full.</para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-ENOTCONN</constant></term>
-
-          <listitem><para>The input parameter <parameter>bus</parameter> is
-          <constant>NULL</constant> or the bus is not connected.</para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-ECONNRESET</constant></term>
-
-          <listitem><para>The bus connection was closed while waiting for the response.
-          </para></listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><constant>-ENOMEM</constant></term>
-
-          <listitem><para>Memory allocation failed.</para></listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-  </refsect1>
-
-  <xi:include href="libsystemd-pkgconfig.xml" />
-
-  <refsect1>
-    <title>See Also</title>
-
-    <para>
-      <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd_bus_call_method</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd_bus_message_set_destination</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd_bus_reply_method_return</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd_bus_send_to</refentrytitle><manvolnum>3</manvolnum></citerefentry>
-    </para>
-  </refsect1>
-
-</refentry>

man/sd_bus_set_method_call_timeout.xml

@@ -96,7 +96,7 @@
     <para>
       <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
-      <citerefentry><refentrytitle>sd_bus_call</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+      <citerefentry><refentrytitle>sd_bus_call</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
     </para>
   </refsect1>