NEWS

@@ -281,20 +281,6 @@ CHANGES WITH 245:
           to combine attachment with enablement and invocation, or detachment
           with stopping and disablement.
 
-        * UPGRADE ISSUE: a bug where some jobs were trimmed as redundant was
-          fixed, which in turn exposed bugs in unit configuration of services
-          which have Type=oneshot and should only run once, but do not have
-          RemainAfterExit=yes set. Without RemainAfterExit=yes, a one-shot
-          service may be started again after exiting successfully, for example
-          as a dependency in another transaction. Affected services included
-          some internal systemd services (most notably
-          systemd-vconsole-setup.service, which was updated to have
-          RemainAfterExit=yes), and plymouth-start.service. Please ensure that
-          plymouth has been suitably updated or patched before upgrading to
-          this systemd release. See
-          https://bugzilla.redhat.com/show_bug.cgi?id=1807771 for some
-          additional discussion.
-
         Contributions from: AJ Bagwell, Alin Popa, Andreas Rammhold, Anita
         Zhang, Ansgar Burchardt, Antonio Russo, Arian van Putten, Ashley Davis,
         Balint Reczey, Bart Willems, Bastien Nocera, Benjamin Dahlhoff, Charles

man/systemd-fstab-generator.xml

@@ -198,15 +198,6 @@
         automatically populate <filename>/etc</filename>, and also <filename>/var</filename> in case of
         <literal>systemd.volatile=yes</literal>.</para></listitem>
       </varlistentry>
-
-      <varlistentry>
-        <term><varname>systemd.swap</varname></term>
-
-        <listitem><para>Takes a boolean argument or enables the option if specified
-        without an argument. If disabled, causes the generator to ignore
-        any swap devices configured in <filename>/etc/fstab</filename>.
-        Defaults to enabled.</para></listitem>
-      </varlistentry>
     </variablelist>
   </refsect1>
 

man/systemd-homed.service.xml

@@ -18,7 +18,7 @@
   <refnamediv>
     <refname>systemd-homed.service</refname>
     <refname>systemd-homed</refname>
-    <refpurpose>Home Area/User Account Manager</refpurpose>
+    <refpurpose>Home Directory/User Account Manager</refpurpose>
   </refnamediv>
 
   <refsynopsisdiv>
@@ -30,14 +30,13 @@
     <title>Description</title>
 
     <para><command>systemd-homed</command> is a system service that may be used to create, remove, change or
-    inspect home areas (directories and network mounts and real or loopback block devices with a filesystem,
-    optionally encrypted).</para>
+    inspect home directories.</para>
 
     <para>Most of <command>systemd-homed</command>'s functionality is accessible through the
     <citerefentry><refentrytitle>homectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> command.</para>
 
     <para>See the <ulink url="https://systemd.io/HOME_DIRECTORY">Home Directories</ulink> documentation for
-    details about the format and design of home areas managed by
+    details about the format and design of home directories managed by
     <filename>systemd-homed.service</filename>.</para>
 
     <para>Each home directory managed by <filename>systemd-homed.service</filename> synthesizes a local user

man/systemd.preset.xml

@@ -70,8 +70,8 @@
     either the word <literal>enable</literal> or
     <literal>disable</literal> followed by a space and a unit name
     (possibly with shell style wildcards), separated by newlines.
-    Empty lines and lines whose first non-whitespace character is <literal>#</literal> or
-    <literal>;</literal> are ignored.</para>
+    Empty lines and lines whose first non-whitespace character is # or
+    ; are ignored.</para>
 
     <para>Presets must refer to the "real" unit file, and not to any aliases. See
     <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>

src/core/main.c

@@ -1995,21 +1995,21 @@ static int do_queue_default_job(
                 const char **ret_error_message) {
 
         _cleanup_(sd_bus_error_free) sd_bus_error error = SD_BUS_ERROR_NULL;
-        const char *unit;
-        Job *job;
-        Unit *target;
+        const char* default_unit;
+        Job *default_unit_job;
+        Unit *target = NULL;
         int r;
 
         if (arg_default_unit)
-                unit = arg_default_unit;
+                default_unit = arg_default_unit;
         else if (in_initrd())
-                unit = SPECIAL_INITRD_TARGET;
+                default_unit = SPECIAL_INITRD_TARGET;
         else
-                unit = SPECIAL_DEFAULT_TARGET;
+                default_unit = SPECIAL_DEFAULT_TARGET;
 
-        log_debug("Activating default unit: %s", unit);
+        log_debug("Activating default unit: %s", default_unit);
 
-        r = manager_load_startable_unit_or_warn(m, unit, NULL, &target);
+        r = manager_load_startable_unit_or_warn(m, default_unit, NULL, &target);
         if (r < 0 && in_initrd() && !arg_default_unit) {
                 /* Fall back to default.target, which we used to always use by default. Only do this if no
                  * explicit configuration was given. */
@@ -2031,13 +2031,13 @@ static int do_queue_default_job(
 
         assert(target->load_state == UNIT_LOADED);
 
-        r = manager_add_job(m, JOB_START, target, JOB_ISOLATE, NULL, &error, &job);
+        r = manager_add_job(m, JOB_START, target, JOB_ISOLATE, NULL, &error, &default_unit_job);
         if (r == -EPERM) {
                 log_debug_errno(r, "Default target could not be isolated, starting instead: %s", bus_error_message(&error, r));
 
                 sd_bus_error_free(&error);
 
-                r = manager_add_job(m, JOB_START, target, JOB_REPLACE, NULL, &error, &job);
+                r = manager_add_job(m, JOB_START, target, JOB_REPLACE, NULL, &error, &default_unit_job);
                 if (r < 0) {
                         *ret_error_message = "Failed to start default target";
                         return log_emergency_errno(r, "Failed to start default target: %s", bus_error_message(&error, r));
@@ -2046,12 +2046,9 @@ static int do_queue_default_job(
         } else if (r < 0) {
                 *ret_error_message = "Failed to isolate default target";
                 return log_emergency_errno(r, "Failed to isolate default target: %s", bus_error_message(&error, r));
-        } else
-                log_info("Queued %s job for default target %s.",
-                         job_type_to_string(job->type),
-                         unit_status_string(job->unit));
+        }
 
-        m->default_unit_job_id = job->id;
+        m->default_unit_job_id = default_unit_job->id;
 
         return 0;
 }

src/fstab-generator/fstab-generator.c

@@ -40,7 +40,6 @@ typedef enum MountpointFlags {
 static const char *arg_dest = NULL;
 static const char *arg_dest_late = NULL;
 static bool arg_fstab_enabled = true;
-static bool arg_swap_enabled = true;
 static char *arg_root_what = NULL;
 static char *arg_root_fstype = NULL;
 static char *arg_root_options = NULL;
@@ -99,11 +98,6 @@ static int add_swap(
         assert(what);
         assert(me);
 
-        if (!arg_swap_enabled) {
-                log_info("Swap unit generation disabled on kernel command line, ignoring fstab swap entry for %s.", what);
-                return 0;
-        }
-
         if (access("/proc/swaps", F_OK) < 0) {
                 log_info("Swap not supported, ignoring fstab swap entry for %s.", what);
                 return 0;
@@ -902,14 +896,6 @@ static int parse_proc_cmdline_item(const char *key, const char *value, void *dat
                                 arg_volatile_mode = m;
                 } else
                         arg_volatile_mode = VOLATILE_YES;
-
-        } else if (streq(key, "systemd.swap")) {
-
-                r = value ? parse_boolean(value) : 1;
-                if (r < 0)
-                        log_warning("Failed to parse systemd.swap switch %s. Ignoring.", value);
-                else
-                        arg_swap_enabled = r;
         }
 
         return 0;

src/shared/ask-password-api.c

@@ -469,7 +469,7 @@ int ask_password_tty(
                 (void) loop_write(ttyfd, message, strlen(message), false);
                 (void) loop_write(ttyfd, " ", 1, false);
 
-                if (!(flags & ASK_PASSWORD_SILENT) && !(flags & ASK_PASSWORD_ECHO)) {
+                if (!(flags & ASK_PASSWORD_SILENT)) {
                         if (use_color)
                                 (void) loop_write(ttyfd, ANSI_GREY, STRLEN(ANSI_GREY), false);
                         (void) loop_write(ttyfd, PRESS_TAB, strlen(PRESS_TAB), false);

units/systemd-homed.service.in

@@ -8,7 +8,7 @@
 #  (at your option) any later version.
 
 [Unit]
-Description=Home Area Manager
+Description=Home Manager
 Documentation=man:systemd-homed.service(8)
 RequiresMountsFor=/home