docs/CONTAINER_INTERFACE.md

@@ -37,10 +37,7 @@ manager, please consider supporting the following interfaces.
    in this context.)
 
 3. Pre-mount `/dev/` as (container private) `tmpfs` for the container and bind
-   mount some suitable TTY to `/dev/console`. If this is a pty, make sure to not
+   mount some suitable TTY to `/dev/console`. Also, make sure to create device
-   close the controling pty master during systemd's lifetime. PID1 will close ttys,
-   to avoid being killed by SAK. It only opens ttys for the time it
-   actually needs to print something. Also, make sure to create device
    nodes for `/dev/null`, `/dev/zero`, `/dev/full`, `/dev/random`,
    `/dev/urandom`, `/dev/tty`, `/dev/ptmx` in `/dev/`. It is not necessary to
    create `/dev/fd` or `/dev/stdout`, as systemd will do that on its own. Make

man/systemd.network.xml

@@ -256,8 +256,8 @@
           <para>Specifies the policy for <command>systemd-networkd</command> managing the link
           administrative state. Specifically, this controls how <command>systemd-networkd</command>
           changes the network device's <literal>IFF_UP</literal> flag, which is sometimes
-          controlled by system administrators by running e.g., <command>ip link set dev eth0 up</command>
+          controlled by system administrators by running e.g., <command>ip set dev eth0 up</command>
-          or <command>ip link set dev eth0 down</command>, and can also be changed with
+          or <command>ip set dev eth0 down</command>, and can also be changed with
           <command>networkctl up eth0</command> or <command>networkctl down eth0</command>.</para>
 
           <para>Takes one of <literal>up</literal>, <literal>always-up</literal>,

man/systemd.unit.xml

@@ -1658,29 +1658,6 @@
           </listitem>
         </varlistentry>
 
-        <varlistentry>
-          <term><varname>ConditionMemoryPressure=</varname></term>
-          <term><varname>ConditionCPUPressure=</varname></term>
-          <term><varname>ConditionIOPressure=</varname></term>
-
-          <listitem><para>Verify that the overall system (memory, CPU or IO) pressure is below or equal to a threshold.
-          This setting takes a threshold value as argument. It can be specified as a simple percentage value,
-          suffixed with <literal>%</literal>, in which case the pressure will be measured as an average over the last
-          five minutes before the attempt to start the unit is performed.
-          Alternatively, the average timespan can also be specified using <literal>/</literal> as a separator, for
-          example: <literal>10%/1min</literal>. The supported timespans match what the kernel provides, and are
-          limited to <literal>10sec</literal>, <literal>1min</literal> and <literal>5min</literal>. The
-          <literal>full</literal> PSI will be checked first, and if not found <literal>some</literal> will be
-          checked. For more details, see the documentation on <ulink
-          url="https://www.kernel.org/doc/html/latest/accounting/psi.html">PSI (Pressure Stall Information)
-          </ulink>.</para>
-
-          <para>Optionally, the threshold value can be prefixed with the slice unit under which the pressure will be checked,
-          followed by a <literal>:</literal>. If the slice unit is not specified, the overall system pressure will be measured,
-          instead of a particular cgroup's.</para>
-          </listitem>
-        </varlistentry>
-
         <varlistentry>
           <term><varname>AssertArchitecture=</varname></term>
           <term><varname>AssertVirtualization=</varname></term>
@@ -1709,9 +1686,6 @@
           <term><varname>AssertMemory=</varname></term>
           <term><varname>AssertCPUs=</varname></term>
           <term><varname>AssertOSRelease=</varname></term>
-          <term><varname>AssertMemoryPressure=</varname></term>
-          <term><varname>AssertCPUPressure=</varname></term>
-          <term><varname>AssertIOPressure=</varname></term>
 
           <listitem><para>Similar to the <varname>ConditionArchitecture=</varname>,
           <varname>ConditionVirtualization=</varname>, …, condition settings described above, these settings

src/core/load-fragment-gperf.gperf.in

@@ -341,9 +341,6 @@ Unit.ConditionUser,                      config_parse_unit_condition_string,
 Unit.ConditionGroup,                     config_parse_unit_condition_string,          CONDITION_GROUP,                    offsetof(Unit, conditions)
 Unit.ConditionControlGroupController,    config_parse_unit_condition_string,          CONDITION_CONTROL_GROUP_CONTROLLER, offsetof(Unit, conditions)
 Unit.ConditionOSRelease,                 config_parse_unit_condition_string,          CONDITION_OS_RELEASE,               offsetof(Unit, conditions)
-Unit.ConditionMemoryPressure,            config_parse_unit_condition_string,          CONDITION_MEMORY_PRESSURE,          offsetof(Unit, conditions)
-Unit.ConditionCPUPressure,               config_parse_unit_condition_string,          CONDITION_CPU_PRESSURE,             offsetof(Unit, conditions)
-Unit.ConditionIOPressure,                config_parse_unit_condition_string,          CONDITION_IO_PRESSURE,              offsetof(Unit, conditions)
 Unit.AssertPathExists,                   config_parse_unit_condition_path,            CONDITION_PATH_EXISTS,              offsetof(Unit, asserts)
 Unit.AssertPathExistsGlob,               config_parse_unit_condition_path,            CONDITION_PATH_EXISTS_GLOB,         offsetof(Unit, asserts)
 Unit.AssertPathIsDirectory,              config_parse_unit_condition_path,            CONDITION_PATH_IS_DIRECTORY,        offsetof(Unit, asserts)
@@ -371,9 +368,6 @@ Unit.AssertUser,                         config_parse_unit_condition_string,
 Unit.AssertGroup,                        config_parse_unit_condition_string,          CONDITION_GROUP,                    offsetof(Unit, asserts)
 Unit.AssertControlGroupController,       config_parse_unit_condition_string,          CONDITION_CONTROL_GROUP_CONTROLLER, offsetof(Unit, asserts)
 Unit.AssertOSRelease,                    config_parse_unit_condition_string,          CONDITION_OS_RELEASE,               offsetof(Unit, asserts)
-Unit.AssertMemoryPressure,               config_parse_unit_condition_string,          CONDITION_MEMORY_PRESSURE,          offsetof(Unit, asserts)
-Unit.AssertCPUPressure,                  config_parse_unit_condition_string,          CONDITION_CPU_PRESSURE,             offsetof(Unit, asserts)
-Unit.AssertIOPressure,                   config_parse_unit_condition_string,          CONDITION_IO_PRESSURE,              offsetof(Unit, asserts)
 Unit.CollectMode,                        config_parse_collect_mode,                   0,                                  offsetof(Unit, collect_mode)
 Service.PIDFile,                         config_parse_pid_file,                       0,                                  offsetof(Service, pid_file)
 Service.ExecCondition,                   config_parse_exec,                           SERVICE_EXEC_CONDITION,             offsetof(Service, exec_command)

src/shared/condition.c

@@ -39,10 +39,8 @@
 #include "os-util.h"
 #include "parse-util.h"
 #include "path-util.h"
-#include "percent-util.h"
 #include "proc-cmdline.h"
 #include "process-util.h"
-#include "psi-util.h"
 #include "selinux-util.h"
 #include "smack-util.h"
 #include "stat-util.h"
@@ -964,131 +962,6 @@ static int condition_test_file_is_executable(Condition *c, char **env) {
                 (st.st_mode & 0111));
 }
 
-static int condition_test_psi(Condition *c, char **env) {
-        _cleanup_free_ char *first = NULL, *second = NULL, *third = NULL, *fourth = NULL, *pressure_path = NULL;
-        const char *p, *value, *pressure_type;
-        loadavg_t *current, limit;
-        ResourcePressure pressure;
-        int r;
-
-        assert(c);
-        assert(c->parameter);
-        assert(IN_SET(c->type, CONDITION_MEMORY_PRESSURE, CONDITION_CPU_PRESSURE, CONDITION_IO_PRESSURE));
-
-        if (!is_pressure_supported()) {
-                log_debug("Pressure Stall Information (PSI) is not supported, skipping.");
-                return 1;
-        }
-
-        pressure_type = c->type == CONDITION_MEMORY_PRESSURE ? "memory" :
-                        c->type == CONDITION_CPU_PRESSURE ? "cpu" :
-                        "io";
-
-        p = c->parameter;
-        r = extract_many_words(&p, ":", 0, &first, &second, NULL);
-        if (r <= 0)
-                return log_debug_errno(r < 0 ? r : SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-        /* If only one parameter is passed, then we look at the global system pressure rather than a specific cgroup. */
-        if (r == 1) {
-                pressure_path = path_join("/proc/pressure", pressure_type);
-                if (!pressure_path)
-                        return log_oom();
-
-                value = first;
-        } else {
-                const char *controller = strjoina(pressure_type, ".pressure");
-                _cleanup_free_ char *slice_path = NULL;
-                CGroupMask mask, required_mask;
-                char *slice;
-
-                required_mask = c->type == CONDITION_MEMORY_PRESSURE ? CGROUP_MASK_MEMORY :
-                                c->type == CONDITION_CPU_PRESSURE ? CGROUP_MASK_CPU :
-                                CGROUP_MASK_IO;
-
-                slice = strstrip(first);
-                if (!slice)
-                        return log_debug_errno(SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-
-                r = cg_all_unified();
-                if (r < 0)
-                        return log_debug_errno(r, "Failed to determine whether the unified cgroups hierarchy is used: %m");
-                if (r == 0) {
-                        log_debug("PSI condition check requires the unified cgroups hierarchy, skipping.");
-                        return 1;
-                }
-
-                r = cg_mask_supported(&mask);
-                if (r < 0)
-                        return log_debug_errno(r, "Failed to get supported cgroup controllers: %m");
-
-                if (!FLAGS_SET(mask, required_mask)) {
-                        log_debug("Cgroup %s controller not available, skipping PSI condition check.", pressure_type);
-                        return 1;
-                }
-
-                r = cg_slice_to_path(slice, &slice_path);
-                if (r < 0)
-                        return log_debug_errno(r, "Cannot determine slice \"%s\" cgroup path: %m", slice);
-
-                r = cg_get_path(SYSTEMD_CGROUP_CONTROLLER, slice_path, controller, &pressure_path);
-                if (r < 0)
-                        return log_debug_errno(r, "Error getting cgroup pressure path from %s: %m", slice_path);
-
-                value = second;
-        }
-
-        /* If a value including a specific timespan (in the intervals allowed by the kernel),
-         * parse it, otherwise we assume just a plain percentage that will be checked if it is
-         * smaller or equal to the current pressure average over 5 minutes. */
-        r = extract_many_words(&value, "/", 0, &third, &fourth, NULL);
-        if (r <= 0)
-                return log_debug_errno(r < 0 ? r : SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-        if (r == 1)
-                current = &pressure.avg300;
-        else {
-                const char *timespan;
-
-                timespan = skip_leading_chars(fourth, NULL);
-                if (!timespan)
-                        return log_debug_errno(SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-
-                if (startswith(timespan, "10sec"))
-                        current = &pressure.avg10;
-                else if (startswith(timespan, "1min"))
-                        current = &pressure.avg60;
-                else if (startswith(timespan, "5min"))
-                        current = &pressure.avg300;
-                else
-                        return log_debug_errno(SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-        }
-
-        value = strstrip(third);
-        if (!value)
-                return log_debug_errno(SYNTHETIC_ERRNO(EINVAL), "Failed to parse condition parameter %s: %m", c->parameter);
-
-        r = parse_permyriad(value);
-        if (r < 0)
-                return log_debug_errno(r, "Failed to parse permyriad: %s", c->parameter);
-
-        r = store_loadavg_fixed_point(r / 100LU, r % 100LU, &limit);
-        if (r < 0)
-                return log_debug_errno(r, "Failed to parse loadavg: %s", c->parameter);
-
-        r = read_resource_pressure(pressure_path, PRESSURE_TYPE_FULL, &pressure);
-        if (r == -ENODATA) /* cpu.pressure 'full' was added recently, fall back to 'some'. */
-                r = read_resource_pressure(pressure_path, PRESSURE_TYPE_SOME, &pressure);
-        if (r == -ENOENT) {
-                /* We already checked that /proc/pressure exists, so this means we were given a cgroup
-                 * that doesn't exist or doesn't exist any longer. */
-                log_debug("\"%s\" not found, skipping PSI check.", pressure_path);
-                return 1;
-        }
-        if (r < 0)
-                return log_debug_errno(r, "Error parsing pressure from %s: %m", pressure_path);
-
-        return *current <= limit;
-}
-
 int condition_test(Condition *c, char **env) {
 
         static int (*const condition_tests[_CONDITION_TYPE_MAX])(Condition *c, char **env) = {
@@ -1121,9 +994,6 @@ int condition_test(Condition *c, char **env) {
                 [CONDITION_ENVIRONMENT]              = condition_test_environment,
                 [CONDITION_CPU_FEATURE]              = condition_test_cpufeature,
                 [CONDITION_OS_RELEASE]               = condition_test_osrelease,
-                [CONDITION_MEMORY_PRESSURE]          = condition_test_psi,
-                [CONDITION_CPU_PRESSURE]             = condition_test_psi,
-                [CONDITION_IO_PRESSURE]              = condition_test_psi,
         };
 
         int r, b;
@@ -1249,9 +1119,6 @@ static const char* const condition_type_table[_CONDITION_TYPE_MAX] = {
         [CONDITION_ENVIRONMENT] = "ConditionEnvironment",
         [CONDITION_CPU_FEATURE] = "ConditionCPUFeature",
         [CONDITION_OS_RELEASE] = "ConditionOSRelease",
-        [CONDITION_MEMORY_PRESSURE] = "ConditionMemoryPressure",
-        [CONDITION_CPU_PRESSURE] = "ConditionCPUPressure",
-        [CONDITION_IO_PRESSURE] = "ConditionIOPressure",
 };
 
 DEFINE_STRING_TABLE_LOOKUP(condition_type, ConditionType);
@@ -1286,9 +1153,6 @@ static const char* const assert_type_table[_CONDITION_TYPE_MAX] = {
         [CONDITION_ENVIRONMENT] = "AssertEnvironment",
         [CONDITION_CPU_FEATURE] = "AssertCPUFeature",
         [CONDITION_OS_RELEASE] = "AssertOSRelease",
-        [CONDITION_MEMORY_PRESSURE] = "AssertMemoryPressure",
-        [CONDITION_CPU_PRESSURE] = "AssertCPUPressure",
-        [CONDITION_IO_PRESSURE] = "AssertIOPressure",
 };
 
 DEFINE_STRING_TABLE_LOOKUP(assert_type, ConditionType);

src/shared/condition.h

@@ -22,9 +22,6 @@ typedef enum ConditionType {
         CONDITION_ENVIRONMENT,
         CONDITION_CPU_FEATURE,
         CONDITION_OS_RELEASE,
-        CONDITION_MEMORY_PRESSURE,
-        CONDITION_CPU_PRESSURE,
-        CONDITION_IO_PRESSURE,
 
         CONDITION_NEEDS_UPDATE,
         CONDITION_FIRST_BOOT,

src/test/test-condition.c

@@ -25,7 +25,6 @@
 #include "nulstr-util.h"
 #include "os-util.h"
 #include "process-util.h"
-#include "psi-util.h"
 #include "selinux-util.h"
 #include "set.h"
 #include "smack-util.h"
@@ -1032,158 +1031,4 @@ TEST(condition_test_os_release) {
         condition_free(condition);
 }
 
-TEST(condition_test_psi) {
-        Condition *condition;
-        CGroupMask mask;
-        int r;
-
-        if (!is_pressure_supported())
-                return (void) log_notice("Pressure Stall Information (PSI) is not supported, skipping %s", __func__);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "sbarabau", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "10%sbarabau", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "10% sbarabau", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "-10", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "10%/10min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "10min/10%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "10% 5min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "/5min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_IO_PRESSURE, "10s /   ", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "100%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "0.0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "100%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "0.0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "0.01%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "0.0%/10sec", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "100.0% / 1min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_IO_PRESSURE, "50.0% / 1min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        r = cg_all_unified();
-        if (r < 0)
-                return (void) log_notice("Failed to determine whether the unified cgroups hierarchy is used, skipping %s", __func__);
-        if (r == 0)
-                return (void) log_notice("Requires the unified cgroups hierarchy, skipping %s", __func__);
-
-        if (cg_mask_supported(&mask) < 0)
-                return (void) log_notice("Failed to get supported cgroup controllers, skipping %s", __func__);
-
-        if (!FLAGS_SET(mask, CGROUP_MASK_MEMORY))
-                return (void) log_notice("Requires the cgroup memory controller, skipping %s", __func__);
-
-        if (!FLAGS_SET(mask, CGROUP_MASK_CPU))
-                return (void) log_notice("Requires the cgroup CPU controller, skipping %s", __func__);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, " : / ", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) < 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "hopefullythisisnotarealone.slice:100% / 10sec", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) > 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_CPU_PRESSURE, "-.slice:100.0% / 1min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "-.slice:0.0%/5min", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_MEMORY_PRESSURE, "-.slice:100.0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-
-        condition = condition_new(CONDITION_IO_PRESSURE, "-.slice:0.0%", false, false);
-        assert_se(condition);
-        assert_se(condition_test(condition, environ) >= 0);
-        condition_free(condition);
-}
-
 DEFINE_TEST_MAIN(LOG_DEBUG);

test/fuzz/fuzz-unit-file/directives-all.service

@@ -12,17 +12,14 @@ AssertACPower=
 AssertArchitecture=
 AssertCapability=
 AssertControlGroupController=
-AssertCPUPressure=
 AssertDirectoryNotEmpty=
 AssertFileIsExecutable=
 AssertFileNotEmpty=
 AssertFirstBoot=
 AssertGroup=
 AssertHost=
-AssertIOPressure=
 AssertKernelCommandLine=
 AssertKernelVersion=
-AssertMemoryPressure=
 AssertNeedsUpdate=
 AssertOSRelease=
 AssertPathExists=
@@ -59,17 +56,14 @@ ConditionACPower=
 ConditionArchitecture=
 ConditionCapability=
 ConditionControlGroupController=
-ConditionCPUPressure=
 ConditionDirectoryNotEmpty=
 ConditionFileIsExecutable=
 ConditionFileNotEmpty=
 ConditionFirstBoot=
 ConditionGroup=
 ConditionHost=
-ConditionIOPressure=
 ConditionKernelCommandLine=
 ConditionKernelVersion=
-ConditionMemoryPressure=
 ConditionNeedsUpdate=
 ConditionOSRelease=
 ConditionPathExists=

test/fuzz/fuzz-unit-file/directives.service

@@ -4,7 +4,6 @@ After=
 AllowIsolate=
 AssertACPower=
 AssertArchitecture=
-AssertCPUPressure=
 AssertCPUs=
 AssertCapability=
 AssertControlGroupController=
@@ -15,11 +14,9 @@ AssertFileNotEmpty=
 AssertFirstBoot=
 AssertGroup=
 AssertHost=
-AssertIOPressure=
 AssertKernelCommandLine=
 AssertKernelVersion=
 AssertMemory=
-AssertMemoryPressure=
 AssertNeedsUpdate=
 AssertOSRelease=
 AssertPathExists=
@@ -40,7 +37,6 @@ BindsTo=
 CollectMode=
 ConditionACPower=
 ConditionArchitecture=
-ConditionCPUPressure=
 ConditionCPUs=
 ConditionFirmware=
 ConditionCapability=
@@ -52,11 +48,9 @@ ConditionFileNotEmpty=
 ConditionFirstBoot=
 ConditionGroup=
 ConditionHost=
-ConditionIOPressure=
 ConditionKernelCommandLine=
 ConditionKernelVersion=
 ConditionMemory=
-ConditionMemoryPressure=
 ConditionNeedsUpdate=
 ConditionOSRelease=
 ConditionPathExists=