journalctl: order systemd-journalctl.socket after systemd-sysusers

The socket failed on boot due to a ordering problem caused by
systemd-sysusers running later and thus the socket group was still
missing. The socket unit can only start when systemd-sysusers created
the group.
Order the socket after systemd-sysusers.service to have the group
available.

NEWS

@@ -64,6 +64,14 @@ CHANGES WITH 260 in spe:
           directory or not, we make use of it unconditionally and have dropped
           support for the old way using protofiles.
 
+        * The org.systemd.login1.Manager D-Bus interface has a minor API break.
+          The `CanPowerOff()`, `CanReboot()`, `CanSuspend()`, etc. family of
+          methods have introduced new return values which may break downstream
+          consumers, such as desktop environments. The new return values more
+          precisely communicate the status of inhibitors. This allows desktops
+          to differentiate between system administrator policy and
+          temporary restrictions imposed by inhibitors.
+
         New system interfaces and components:
 
         * The os-release(3) gained a new field FANCY_NAME= that is similar
@@ -115,6 +123,9 @@ CHANGES WITH 260 in spe:
         * SetProperties() D-Bus method now has a Varlink counterpart. For now,
           it only supports setting the Markers= property.
 
+        * New 'needs-start' and 'needs-stop' settings are now supported for the
+          Markers= property.
+
         Changes in udev:
 
         * Permissions for /dev/ptp* are now set to 0664 (previously 0660),
@@ -138,6 +149,18 @@ CHANGES WITH 260 in spe:
           low brightness values at runtime independently of the systemd clamp
           which only applies during boot.
 
+        * A new variable ID_INTEGRATION is now exposed to devices that have
+          ID_BUS defined. This variable can be set to internal when the device
+          is integral part of the system or external otherwise. Actually,
+          internal buses like PCI, I2C, SPI... makes it to be internal and
+          external buses like bluetooth set it to external, while for USB the
+          removable attribute of the port the device is connected tells us to
+          decide, fixed is set to internal and removable or unknown to external.
+
+        * ID_INPUT_JOYSTICK_INTEGRATION variable has been dropped in favor of
+          ID_INTEGRATION because it was never used and the new variable cover
+          better the idea that variable was intended for.
+
         Changes in systemd-networkd:
 
         * MultiPathRoute= option now supports interface-bound ECMP routes.
@@ -178,6 +201,9 @@ CHANGES WITH 260 in spe:
 
         * resolvectl now uses varlink to connect to systemd-resolved.
 
+        * systemd-resolved now supports ifindex=0 in the BrowseServices IPC API,
+          to allow browsing all mDNS interfaces in one call.
+
         Changes in other components:
 
         * systemd-repart gained basic support for integrity checks of encrypted

hwdb.d/70-joystick.hwdb

@@ -26,10 +26,10 @@
 #
 # Permitted keys:
 #   Specify if a joystick is a built-in one or external:
-#   ID_INPUT_JOYSTICK_INTEGRATION=internal|external
+#   ID_INTEGRATION=internal|external
 #
 #   If the property is missing, user-space can assume:
-#   ID_INPUT_JOYSTICK_INTEGRATION=external
+#   ID_INTEGRATION=external
 #
 #   By default i8042, i2c, and rmi devices are assumed to be internal,
 #   bluetooth devices are assumed to be external, usb devices are assumed
@@ -38,4 +38,4 @@
 # Example entry; vid: ffff, pid: 0000; both must be lowercase.
 # this will make this usb joystick to behave as internal.
 #joystick:usb:vffffp0000*
-# ID_INPUT_JOYSTICK_INTEGRATION=internal
+# ID_INTEGRATION=internal

hwdb.d/parse_hwdb.py

@@ -183,7 +183,7 @@ def property_grammar():
              ('ID_MM_DEVICE_IGNORE', Or((Literal('0'), Literal('1')))),
              ('ID_NET_AUTO_LINK_LOCAL_ONLY', Or((Literal('0'), Literal('1')))),
              ('POINTINGSTICK_SENSITIVITY', INTEGER),
-             ('ID_INPUT_JOYSTICK_INTEGRATION', Or(('internal', 'external'))),
+             ('ID_INTEGRATION', Or(('internal', 'external'))),
              ('ID_INPUT_TOUCHPAD_INTEGRATION', Or(('internal', 'external'))),
              ('XKB_FIXED_LAYOUT', xkb_setting),
              ('XKB_FIXED_VARIANT', xkb_setting),

man/org.freedesktop.login1.xml

@@ -276,7 +276,6 @@ node /org/freedesktop/login1 {
       readonly t RuntimeDirectoryInodesMax = ...;
       @org.freedesktop.DBus.Property.EmitsChangedSignal("const")
       readonly t InhibitorsMax = ...;
-      @org.freedesktop.DBus.Property.EmitsChangedSignal("false")
       readonly t NCurrentInhibitors = ...;
       @org.freedesktop.DBus.Property.EmitsChangedSignal("const")
       readonly t SessionsMax = ...;
@@ -711,12 +710,19 @@ node /org/freedesktop/login1 {
       <function>CanRebootParameter()</function>, <function>CanRebootToFirmwareSetup()</function>,
       <function>CanRebootToBootLoaderMenu()</function>, and <function>CanRebootToBootLoaderEntry()</function>
       test whether the system supports the respective operation and whether the calling user is allowed to
-      execute it. Returns one of <literal>na</literal>, <literal>yes</literal>, <literal>no</literal>, and
+      execute it. Returns one of <literal>na</literal>, <literal>yes</literal>, <literal>no</literal>,
-      <literal>challenge</literal>. If <literal>na</literal> is returned, the operation is not available because
+      <literal>challenge</literal>, and <literal>inhibited</literal>. If <literal>na</literal> is returned,
-      hardware, kernel, or drivers do not support it. If <literal>yes</literal> is returned, the operation is
+      the operation is not available because hardware, kernel, or drivers do not support it. If <literal>yes</literal>
-      supported and the user may execute the operation without further authentication. If <literal>no</literal>
+      is returned, the operation is supported and the user may execute the operation without further authentication.
-      is returned, the operation is available but the user is not allowed to execute the operation. If
+      If <literal>no</literal> is returned, the operation is available but the user is not allowed to execute
-      <literal>challenge</literal> is returned, the operation is available but only after authorization.</para>
+      the operation. If <literal>challenge</literal> is returned, the operation is available but only after
+      authorization. If <literal>inhibited</literal> is returned, the operation is normally available without
+      authorization but is currently inhibited. The operation is available only if inhibitors are ignored and
+      after authorization. If <literal>inhibitor-blocked</literal> is returned, the operation is normally
+      available without authorization but is currently inhibited. While the inhibitor remains active, the user
+      is not allowed to execute the operation. <literal>challenge-inhibitor-blocked</literal> is similar:
+      the operation is normally available after authorization but a held inhibitor disallows the user from
+      executing the operation.</para>
 
       <para><function>ScheduleShutdown()</function> schedules a shutdown operation <varname>type</varname> at
       time <varname>usec</varname> in microseconds since the UNIX epoch. Alternatively, if

rules.d/65-integration.rules

@@ -16,10 +16,7 @@ ENV{ID_BUS}=="bluetooth", ENV{ID_INTEGRATION}="external"
 ENV{ID_BUS}=="usb", DRIVERS=="usb", ATTRS{maxchild}=="0", ATTRS{removable}=="fixed", ENV{ID_INTEGRATION}="internal"
 ENV{ID_BUS}=="usb", DRIVERS=="usb", ATTRS{maxchild}=="0", ATTRS{removable}=="removable|unknown", ENV{ID_INTEGRATION}="external"
 
-# libinput compatibility variables, must be loaded before 70-(joystick|touchpad).rules to allow hwdb quirks to override.
+# libinput compatibility, must be loaded before 70-touchpad.rules to allow hwdb quirks to override.
-ENV{ID_INPUT}=="", GOTO="integration_libinput_end"
-ENV{ID_INPUT_JOYSTICK}=="1", ENV{ID_INPUT_JOYSTICK_INTEGRATION}="$env{ID_INTEGRATION}"
 ENV{ID_INPUT_TOUCHPAD}=="1", ENV{ID_INPUT_TOUCHPAD_INTEGRATION}="$env{ID_INTEGRATION}"
-LABEL="integration_libinput_end"
 
 LABEL="integration_end"

rules.d/70-joystick.rules

@@ -8,9 +8,4 @@ KERNEL!="event*", GOTO="joystick_end"
 KERNELS=="input*", ENV{ID_BUS}!="", \
         IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
 
-# Spread the hwdb override to ID_INTEGRATION, in the future we could remove the
-# joystick hwdb entirely or retain it using the generic ID_INTEGRATION instead
-# specific ID_INPUT_JOYSTICK_INTEGRATION.
-ENV{ID_INPUT_JOYSTICK_INTEGRATION}!="", ENV{ID_INTEGRATION}="$env{ID_INPUT_JOYSTICK_INTEGRATION}"
-
 LABEL="joystick_end"

rules.d/73-seat-late.rules.in

@@ -14,7 +14,7 @@ ENV{ID_SEAT}=="", IMPORT{parent}="ID_SEAT"
 
 ENV{ID_SEAT}!="", TAG+="$env{ID_SEAT}"
 {% if HAVE_ACL %}
-TAG=="uaccess|xaccess", ENV{MAJOR}!="", RUN{builtin}+="uaccess"
+TAG=="uaccess|xaccess-*", ENV{MAJOR}!="", RUN{builtin}+="uaccess"
 {% endif %}
 
 LABEL="seat_late_end"

src/basic/filesystem-sets.py

@@ -80,6 +80,7 @@ NAME_TO_MAGIC = {
     'nsfs':            ['NSFS_MAGIC'],
     'ntfs':            ['NTFS_SB_MAGIC'],
     'ntfs3':           ['NTFS3_SUPER_MAGIC'],
+    'nullfs':          ['NULL_FS_MAGIC'],
     'ocfs2':           ['OCFS2_SUPER_MAGIC'],
     'openpromfs':      ['OPENPROM_SUPER_MAGIC'],
     'orangefs':        ['ORANGEFS_DEVREQ_MAGIC'],

src/basic/generate-errno-list.sh

@@ -3,12 +3,16 @@
 set -eu
 set -o pipefail
 
-# In kernel's arch/parisc/include/uapi/asm/errno.h, ECANCELLED and EREFUSED are defined as aliases of
+# In kernel's arch/parisc/include/uapi/asm/errno.h, The following aliases are defined:
-# ECANCELED and ECONNREFUSED, respectively. Let's drop them.
+# ECANCELLED → ECANCELED
+# EREFUSED → ECONNREFUSED
+# EFSBADCRC → EBADMSG
+# EFSCORRUPTED → EUCLEAN
+# Let's drop them.
 
 CC=${1:?}
 shift
 
 $CC -dM -include errno.h "$@" - </dev/null | \
-       grep -Ev '^#define[[:space:]]+(ECANCELLED|EREFUSED)' | \
+       grep -Ev '^#define[[:space:]]+(ECANCELLED|EREFUSED|EFSBADCRC|EFSCORRUPTED)' | \
        awk '/^#define[ \t]+E[^ _]+[ \t]+/ { print $2; }'

src/include/uapi/linux/bpf.h

@@ -119,6 +119,14 @@ enum bpf_cgroup_iter_order {
 	BPF_CGROUP_ITER_DESCENDANTS_PRE,	/* walk descendants in pre-order. */
 	BPF_CGROUP_ITER_DESCENDANTS_POST,	/* walk descendants in post-order. */
 	BPF_CGROUP_ITER_ANCESTORS_UP,		/* walk ancestors upward. */
+	/*
+	 * Walks the immediate children of the specified parent
+	 * cgroup_subsys_state. Unlike BPF_CGROUP_ITER_DESCENDANTS_PRE,
+	 * BPF_CGROUP_ITER_DESCENDANTS_POST, and BPF_CGROUP_ITER_ANCESTORS_UP
+	 * the iterator does not include the specified parent as one of the
+	 * returned iterator elements.
+	 */
+	BPF_CGROUP_ITER_CHILDREN,
 };
 
 union bpf_iter_link_info {
@@ -918,6 +926,16 @@ union bpf_iter_link_info {
  *		Number of bytes read from the stream on success, or -1 if an
  *		error occurred (in which case, *errno* is set appropriately).
  *
+ * BPF_PROG_ASSOC_STRUCT_OPS
+ * 	Description
+ * 		Associate a BPF program with a struct_ops map. The struct_ops
+ * 		map is identified by *map_fd* and the BPF program is
+ * 		identified by *prog_fd*.
+ *
+ * 	Return
+ * 		0 on success or -1 if an error occurred (in which case,
+ * 		*errno* is set appropriately).
+ *
  * NOTES
  *	eBPF objects (maps and programs) can be shared between processes.
  *
@@ -974,6 +992,7 @@ enum bpf_cmd {
 	BPF_PROG_BIND_MAP,
 	BPF_TOKEN_CREATE,
 	BPF_PROG_STREAM_READ_BY_FD,
+	BPF_PROG_ASSOC_STRUCT_OPS,
 	__MAX_BPF_CMD,
 };
 
@@ -1134,6 +1153,7 @@ enum bpf_attach_type {
 	BPF_NETKIT_PEER,
 	BPF_TRACE_KPROBE_SESSION,
 	BPF_TRACE_UPROBE_SESSION,
+	BPF_TRACE_FSESSION,
 	__MAX_BPF_ATTACH_TYPE
 };
 
@@ -1373,6 +1393,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
@@ -1894,6 +1916,12 @@ union bpf_attr {
 		__u32		prog_fd;
 	} prog_stream_read;
 
+	struct {
+		__u32		map_fd;
+		__u32		prog_fd;
+		__u32		flags;
+	} prog_assoc_struct_ops;
+
 } __attribute__((aligned(8)));
 
 /* The description below is an attempt at providing documentation to eBPF

src/include/uapi/linux/btrfs.h

@@ -334,6 +334,7 @@ struct btrfs_ioctl_fs_info_args {
 #define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2	(1ULL << 13)
 #define BTRFS_FEATURE_INCOMPAT_RAID_STRIPE_TREE	(1ULL << 14)
 #define BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA	(1ULL << 16)
+#define BTRFS_FEATURE_INCOMPAT_REMAP_TREE	(1ULL << 17)
 
 struct btrfs_ioctl_feature_flags {
 	__u64 compat_flags;

src/include/uapi/linux/btrfs_tree.h

@@ -72,6 +72,9 @@
 /* Tracks RAID stripes in block groups. */
 #define BTRFS_RAID_STRIPE_TREE_OBJECTID 12ULL
 
+/* Holds details of remapped addresses after relocation. */
+#define BTRFS_REMAP_TREE_OBJECTID 13ULL
+
 /* device stats in the device tree */
 #define BTRFS_DEV_STATS_OBJECTID 0ULL
 
@@ -278,6 +281,10 @@
 
 #define BTRFS_RAID_STRIPE_KEY	230
 
+#define BTRFS_IDENTITY_REMAP_KEY 	234
+#define BTRFS_REMAP_KEY		 	235
+#define BTRFS_REMAP_BACKREF_KEY	 	236
+
 /*
  * Records the overall state of the qgroups.
  * There's only one instance of this key present,
@@ -710,9 +717,12 @@ struct btrfs_super_block {
 	__u8 metadata_uuid[BTRFS_FSID_SIZE];
 
 	__u64 nr_global_roots;
+	__le64 remap_root;
+	__le64 remap_root_generation;
+	__u8 remap_root_level;
 
 	/* Future expansion */
-	__le64 reserved[27];
+	__u8 reserved[199];
 	__u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE];
 	struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS];
 
@@ -1157,12 +1167,15 @@ struct btrfs_dev_replace_item {
 #define BTRFS_BLOCK_GROUP_RAID6         (1ULL << 8)
 #define BTRFS_BLOCK_GROUP_RAID1C3       (1ULL << 9)
 #define BTRFS_BLOCK_GROUP_RAID1C4       (1ULL << 10)
+#define BTRFS_BLOCK_GROUP_REMAPPED      (1ULL << 11)
+#define BTRFS_BLOCK_GROUP_METADATA_REMAP (1ULL << 12)
 #define BTRFS_BLOCK_GROUP_RESERVED	(BTRFS_AVAIL_ALLOC_BIT_SINGLE | \
 					 BTRFS_SPACE_INFO_GLOBAL_RSV)
 
 #define BTRFS_BLOCK_GROUP_TYPE_MASK	(BTRFS_BLOCK_GROUP_DATA |    \
 					 BTRFS_BLOCK_GROUP_SYSTEM |  \
-					 BTRFS_BLOCK_GROUP_METADATA)
+					 BTRFS_BLOCK_GROUP_METADATA | \
+					 BTRFS_BLOCK_GROUP_METADATA_REMAP)
 
 #define BTRFS_BLOCK_GROUP_PROFILE_MASK	(BTRFS_BLOCK_GROUP_RAID0 |   \
 					 BTRFS_BLOCK_GROUP_RAID1 |   \
@@ -1215,6 +1228,14 @@ struct btrfs_block_group_item {
 	__le64 flags;
 } __attribute__ ((__packed__));
 
+struct btrfs_block_group_item_v2 {
+	__le64 used;
+	__le64 chunk_objectid;
+	__le64 flags;
+	__le64 remap_bytes;
+	__le32 identity_remap_count;
+} __attribute__ ((__packed__));
+
 struct btrfs_free_space_info {
 	__le32 extent_count;
 	__le32 flags;
@@ -1319,4 +1340,13 @@ struct btrfs_verity_descriptor_item {
 	__u8 encryption;
 } __attribute__ ((__packed__));
 
+/*
+ * For a range identified by a BTRFS_REMAP_KEY item in the remap tree, gives
+ * the address that the start of the range will get remapped to.  This
+ * structure is also shared by BTRFS_REMAP_BACKREF_KEY.
+ */
+struct btrfs_remap_item {
+	__le64 address;
+} __attribute__ ((__packed__));
+
 #endif /* _BTRFS_CTREE_H_ */

src/include/uapi/linux/ethtool.h

@@ -15,11 +15,10 @@
 #define _LINUX_ETHTOOL_H
 
 #include <linux/const.h>
+#include <linux/typelimits.h>
 #include <linux/types.h>
 #include <linux/if_ether.h>
 
-#include <limits.h> /* for INT_MAX */
-
 /* All structures exposed to userland should be defined such that they
  * have the same layout for 32-bit and 64-bit userland.
  */
@@ -601,6 +600,8 @@ enum ethtool_link_ext_state {
 	ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
 	ETHTOOL_LINK_EXT_STATE_OVERHEAT,
 	ETHTOOL_LINK_EXT_STATE_MODULE,
+	ETHTOOL_LINK_EXT_STATE_OTP_SPEED_VIOLATION,
+	ETHTOOL_LINK_EXT_STATE_BMC_REQUEST_DOWN,
 };
 
 /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
@@ -1092,13 +1093,20 @@ enum ethtool_module_fw_flash_status {
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
  * @string_set: String set ID; one of &enum ethtool_stringset
- * @len: On return, the number of strings in the string set
+ * @len: Number of strings in the string set
  * @data: Buffer for strings.  Each string is null-padded to a size of
  *	%ETH_GSTRING_LEN.
  *
  * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
  * the string set.  They must allocate a buffer of the appropriate
  * size immediately following this structure.
+ *
+ * Setting @len on input is optional (though preferred), but must be zeroed
+ * otherwise.
+ * When set, @len will return the requested count if it matches the actual
+ * count; otherwise, it will be zero.
+ * This prevents issues when the number of strings is different than the
+ * userspace allocation.
  */
 struct ethtool_gstrings {
 	__u32	cmd;
@@ -1175,13 +1183,20 @@ struct ethtool_test {
 /**
  * struct ethtool_stats - device-specific statistics
  * @cmd: Command number = %ETHTOOL_GSTATS
- * @n_stats: On return, the number of statistics
+ * @n_stats: Number of statistics
  * @data: Array of statistics
  *
  * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
  * number of statistics that will be returned.  They must allocate a
  * buffer of the appropriate size (8 * number of statistics)
  * immediately following this structure.
+ *
+ * Setting @n_stats on input is optional (though preferred), but must be zeroed
+ * otherwise.
+ * When set, @n_stats will return the requested count if it matches the actual
+ * count; otherwise, it will be zero.
+ * This prevents issues when the number of stats is different than the
+ * userspace allocation.
  */
 struct ethtool_stats {
 	__u32	cmd;
@@ -2188,6 +2203,7 @@ enum ethtool_link_mode_bit_indices {
 #define SPEED_40000		40000
 #define SPEED_50000		50000
 #define SPEED_56000		56000
+#define SPEED_80000		80000
 #define SPEED_100000		100000
 #define SPEED_200000		200000
 #define SPEED_400000		400000
@@ -2198,7 +2214,7 @@ enum ethtool_link_mode_bit_indices {
 
 static __inline__ int ethtool_validate_speed(__u32 speed)
 {
-	return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN;
+	return speed <= __KERNEL_INT_MAX || speed == (__u32)SPEED_UNKNOWN;
 }
 
 /* Duplex, half or full. */

src/include/uapi/linux/fs.h

@@ -249,6 +249,7 @@ struct file_attr {
 #define FS_XFLAG_FILESTREAM	0x00004000	/* use filestream allocator */
 #define FS_XFLAG_DAX		0x00008000	/* use DAX for IO */
 #define FS_XFLAG_COWEXTSIZE	0x00010000	/* CoW extent size allocator hint */
+#define FS_XFLAG_VERITY		0x00020000	/* fs-verity enabled */
 #define FS_XFLAG_HASATTR	0x80000000	/* no DIFLAG for this	*/
 
 /* the read-only stuff doesn't really belong here, but any other place is

src/include/uapi/linux/if_link.h

@@ -1441,6 +1441,7 @@ enum {
 	IFLA_GENEVE_DF,
 	IFLA_GENEVE_INNER_PROTO_INHERIT,
 	IFLA_GENEVE_PORT_RANGE,
+	IFLA_GENEVE_GRO_HINT,
 	__IFLA_GENEVE_MAX
 };
 #define IFLA_GENEVE_MAX	(__IFLA_GENEVE_MAX - 1)

src/include/uapi/linux/magic.h

@@ -104,5 +104,6 @@
 #define SECRETMEM_MAGIC		0x5345434d	/* "SECM" */
 #define PID_FS_MAGIC		0x50494446	/* "PIDF" */
 #define GUEST_MEMFD_MAGIC	0x474d454d	/* "GMEM" */
+#define NULL_FS_MAGIC		0x4E554C4C	/* "NULL" */
 
 #endif /* __LINUX_MAGIC_H__ */

src/include/uapi/linux/mempolicy.h

@@ -39,6 +39,9 @@ enum {
 #define MPOL_MODE_FLAGS							\
 	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES | MPOL_F_NUMA_BALANCING)
 
+/* Whether the nodemask is specified by users */
+#define MPOL_USER_NODEMASK_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
 /* Flags for get_mempolicy */
 #define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
 #define MPOL_F_ADDR	(1<<1)	/* look up vma using address */

src/include/uapi/linux/mount.h

@@ -61,7 +61,8 @@
 /*
  * open_tree() flags.
  */
-#define OPEN_TREE_CLONE		1		/* Clone the target tree and attach the clone */
+#define OPEN_TREE_CLONE		(1 << 0)	/* Clone the target tree and attach the clone */
+#define OPEN_TREE_NAMESPACE	(1 << 1)	/* Clone the target tree into a new mount namespace */
 #define OPEN_TREE_CLOEXEC	O_CLOEXEC	/* Close the file on execve() */
 
 /*
@@ -197,7 +198,10 @@ struct statmount {
  */
 struct mnt_id_req {
 	__u32 size;
-	__u32 mnt_ns_fd;
+	union {
+		__u32 mnt_ns_fd;
+		__u32 mnt_fd;
+	};
 	__u64 mnt_id;
 	__u64 param;
 	__u64 mnt_ns_id;
@@ -232,4 +236,9 @@ struct mnt_id_req {
 #define LSMT_ROOT		0xffffffffffffffff	/* root mount */
 #define LISTMOUNT_REVERSE	(1 << 0) /* List later mounts first */
 
+/*
+ * @flag bits for statmount(2)
+ */
+#define STATMOUNT_BY_FD		0x00000001U	/* want mountinfo for given fd */
+
 #endif /* _LINUX_MOUNT_H */

src/include/uapi/linux/netfilter_ipv4.h

@@ -7,11 +7,10 @@
 
 
 #include <linux/netfilter.h>
+#include <linux/typelimits.h>
 
 /* only for userspace compatibility */
 
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
 /* IP Hooks */
 /* After promisc drops, checksum checks. */
 #define NF_IP_PRE_ROUTING	0
@@ -26,7 +25,7 @@
 #define NF_IP_NUMHOOKS		5
 
 enum nf_ip_hook_priorities {
-	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_FIRST = __KERNEL_INT_MIN,
 	NF_IP_PRI_RAW_BEFORE_DEFRAG = -450,
 	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
 	NF_IP_PRI_RAW = -300,
@@ -39,8 +38,8 @@ enum nf_ip_hook_priorities {
 	NF_IP_PRI_NAT_SRC = 100,
 	NF_IP_PRI_SELINUX_LAST = 225,
 	NF_IP_PRI_CONNTRACK_HELPER = 300,
-	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+	NF_IP_PRI_CONNTRACK_CONFIRM = __KERNEL_INT_MAX,
-	NF_IP_PRI_LAST = INT_MAX,
+	NF_IP_PRI_LAST = __KERNEL_INT_MAX,
 };
 
 /* Arguments for setsockopt SOL_IP: */

src/include/uapi/linux/nl80211.h

@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2025 Intel Corporation
+ * Copyright (C) 2018-2026 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -2974,6 +2974,16 @@ enum nl80211_commands {
  *	primary channel is 2 MHz wide, and the control channel designates
  *	the 1 MHz primary subchannel within that 2 MHz primary.
  *
+ * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP
+ *	STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA
+ *
+ * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION). Can be set
+ *	only if HE/EHT are also available.
+ * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable
+ *	this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3542,6 +3552,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_S1G_PRIMARY_2MHZ,
 
+	NL80211_ATTR_EPP_PEER,
+
+	NL80211_ATTR_UHR_CAPABILITY,
+	NL80211_ATTR_DISABLE_UHR,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3894,6 +3909,12 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
  * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
  * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
+ * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23)
+ *	Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS)
+ *	are used in conjunction with this where applicable
+ * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1,
+ *	MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6.
+ * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3927,6 +3948,9 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_4_MHZ_WIDTH,
 	NL80211_RATE_INFO_8_MHZ_WIDTH,
 	NL80211_RATE_INFO_16_MHZ_WIDTH,
+	NL80211_RATE_INFO_UHR_MCS,
+	NL80211_RATE_INFO_UHR_ELR,
+	NL80211_RATE_INFO_UHR_IM,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -4249,6 +4273,10 @@ enum nl80211_mpath_info {
  *	capabilities element
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as
  *	defined in EHT capabilities element
+ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR
+ *	capabilities element
+ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR
+ *	capabilities element
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
  */
@@ -4266,6 +4294,8 @@ enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
+	NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC,
+	NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY,
 
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -4445,6 +4475,11 @@ enum nl80211_wmm_rule {
  *	channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this
  *	channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use
+ *	as a primary channel. Does not prevent the channel from existing
+ *	as a non-primary subchannel. Only applicable to S1G channels.
+ * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel
+ *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4493,6 +4528,8 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_4MHZ,
 	NL80211_FREQUENCY_ATTR_NO_8MHZ,
 	NL80211_FREQUENCY_ATTR_NO_16MHZ,
+	NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY,
+	NL80211_FREQUENCY_ATTR_NO_UHR,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4706,6 +4743,7 @@ enum nl80211_sched_scan_match_attr {
  *	despite NO_IR configuration.
  * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth,
  *	despite NO_IR configuration.
+ * @NL80211_RRF_NO_UHR: UHR operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM                 = 1 << 0,
@@ -4732,6 +4770,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_6GHZ_AFC_CLIENT      = 1 << 23,
 	NL80211_RRF_ALLOW_6GHZ_VLP_AP       = 1 << 24,
 	NL80211_RRF_ALLOW_20MHZ_ACTIVITY    = 1 << 25,
+	NL80211_RRF_NO_UHR		    = 1 << 26,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -5426,6 +5465,7 @@ enum nl80211_bss_status {
  * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
  * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
  * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
+ * @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -5441,6 +5481,7 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FILS_SK,
 	NL80211_AUTHTYPE_FILS_SK_PFS,
 	NL80211_AUTHTYPE_FILS_PK,
+	NL80211_AUTHTYPE_EPPKE,
 
 	/* keep last */
 	__NL80211_AUTHTYPE_NUM,
@@ -6745,6 +6786,15 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate
  *	configuration (AP/mesh) with EHT rates.
  *
+ * @NL80211_EXT_FEATURE_EPPKE: Driver supports Enhanced Privacy Protection
+ *	Key Exchange (EPPKE) with user space SME (NL80211_CMD_AUTHENTICATE)
+ *	in non-AP STA mode.
+ *
+ * @NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION: This specifies that the
+ *	driver supports encryption of (Re)Association Request and Response
+ *	frames in both non‑AP STA and AP mode as specified in
+ *	"IEEE P802.11bi/D3.0, 12.16.6".
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6821,6 +6871,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_DFS_CONCURRENT,
 	NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 	NL80211_EXT_FEATURE_BEACON_RATE_EHT,
+	NL80211_EXT_FEATURE_EPPKE,
+	NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -7433,6 +7485,8 @@ enum nl80211_nan_band_conf_attributes {
  *	address that can take values from 50-6F-9A-01-00-00 to
  *	50-6F-9A-01-FF-FF. This attribute is optional. If not present,
  *	a random Cluster ID will be chosen.
+ *	This attribute will be ignored in NL80211_CMD_CHANGE_NAN_CONFIG
+ *	since after NAN was started, the cluster ID can no longer change.
  * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be
  *	published in the beacons. This is an optional byte array.
  * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will
@@ -7767,6 +7821,30 @@ enum nl80211_peer_measurement_attrs {
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
  *	if non-trigger-based ranging measurement is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT: flag attribute indicating if
+ *	ranging on the 6 GHz band is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP: u32 attribute indicating
+ *	the maximum number of LTF repetitions the device can transmit in the
+ *	preamble of the ranging NDP (zero means only one LTF, no repetitions)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP: u32 attribute indicating
+ *	the maximum number of LTF repetitions the device can receive in the
+ *	preamble of the ranging NDP (zero means only one LTF, no repetitions)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS: u32 attribute indicating
+ *	the maximum number of space-time streams supported for ranging NDP TX
+ *	(zero-based)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS: u32 attribute indicating
+ *	the maximum number of space-time streams supported for ranging NDP RX
+ *	(zero-based)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX: u32 attribute indicating the
+ *	maximum total number of LTFs the device can transmit. The total number
+ *	of LTFs is (number of LTF repetitions) * (number of space-time streams).
+ *	This limits the allowed combinations of LTF repetitions and STS.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX: u32 attribute indicating the
+ *	maximum total number of LTFs the device can receive. The total number
+ *	of LTFs is (number of LTF repetitions) * (number of space-time streams).
+ *	This limits the allowed combinations of LTF repetitions and STS.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the
+ *	device supports operating as the RSTA in PMSR FTM request
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7784,6 +7862,14 @@ enum nl80211_peer_measurement_ftm_capa {
 	NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
 	NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
 	NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
+	NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX,
+	NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX,
+	NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_CAPA_ATTR,
@@ -7799,12 +7885,15 @@ enum nl80211_peer_measurement_ftm_capa {
  *	&enum nl80211_preamble), optional for DMG (u32)
  * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
  *	802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
- *	(u8, 0-15, optional with default 15 i.e. "no preference")
+ *	(u8, 0-15, optional with default 15 i.e. "no preference". No limit for
+ *	 non-EDCA ranging)
  * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
  *	of 100ms (u16, optional with default 0)
  * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
  *	Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
- *	default 15 i.e. "no preference")
+ *	default 15 i.e. "no preference"). For non-EDCA ranging, this is the
+ *	burst duration in milliseconds (optional with default 0, i.e. let the
+ *	device decide).
  * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
  *	requested per burst
  *	(u8, 0-31, optional with default 0 i.e. "no preference")
@@ -7833,6 +7922,14 @@ enum nl80211_peer_measurement_ftm_capa {
  * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
  *	responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
  *	or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_RSTA: optional. Request to perform the measurement
+ *	as the RSTA (flag). When set, the device is expected to dwell on the
+ *	channel specified in %NL80211_PMSR_PEER_ATTR_CHAN until it receives the
+ *	FTM request from the peer or the timeout specified by
+ *	%NL80211_ATTR_TIMEOUT has expired.
+ *	Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the
+ *	RSTA will have the measurement results to report back in the FTM
+ *	response).
  *
  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -7853,6 +7950,7 @@ enum nl80211_peer_measurement_ftm_req {
 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
 	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
 	NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
+	NL80211_PMSR_FTM_REQ_ATTR_RSTA,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -7937,6 +8035,8 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
  *	9.4.2.22.1) starting with the Measurement Token, with Measurement
  *	Type 11.
  * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by
+ *	the responder (similar to request, u16)
  *
  * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
  * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
@@ -7965,6 +8065,7 @@ enum nl80211_peer_measurement_ftm_resp {
 	NL80211_PMSR_FTM_RESP_ATTR_LCI,
 	NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
 	NL80211_PMSR_FTM_RESP_ATTR_PAD,
+	NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD,
 
 	/* keep last */
 	NUM_NL80211_PMSR_FTM_RESP_ATTR,

src/include/uapi/linux/pkt_sched.h

@@ -1036,6 +1036,7 @@ enum {
 	TCA_CAKE_STATS_DROP_NEXT_US,
 	TCA_CAKE_STATS_P_DROP,
 	TCA_CAKE_STATS_BLUE_TIMER_US,
+	TCA_CAKE_STATS_ACTIVE_QUEUES,
 	__TCA_CAKE_STATS_MAX
 };
 #define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1)

src/include/uapi/linux/prctl.h

@@ -386,4 +386,41 @@ struct prctl_mm_map {
 # define PR_FUTEX_HASH_SET_SLOTS	1
 # define PR_FUTEX_HASH_GET_SLOTS	2
 
+/* RSEQ time slice extensions */
+#define PR_RSEQ_SLICE_EXTENSION			79
+# define PR_RSEQ_SLICE_EXTENSION_GET		1
+# define PR_RSEQ_SLICE_EXTENSION_SET		2
+/*
+ * Bits for RSEQ_SLICE_EXTENSION_GET/SET
+ * PR_RSEQ_SLICE_EXT_ENABLE:	Enable
+ */
+# define PR_RSEQ_SLICE_EXT_ENABLE		0x01
+
+/*
+ * Get the current indirect branch tracking configuration for the current
+ * thread, this will be the value configured via PR_SET_INDIR_BR_LP_STATUS.
+ */
+#define PR_GET_INDIR_BR_LP_STATUS      80
+
+/*
+ * Set the indirect branch tracking configuration. PR_INDIR_BR_LP_ENABLE will
+ * enable cpu feature for user thread, to track all indirect branches and ensure
+ * they land on arch defined landing pad instruction.
+ * x86 - If enabled, an indirect branch must land on an ENDBRANCH instruction.
+ * arch64 - If enabled, an indirect branch must land on a BTI instruction.
+ * riscv - If enabled, an indirect branch must land on an lpad instruction.
+ * PR_INDIR_BR_LP_DISABLE will disable feature for user thread and indirect
+ * branches will no more be tracked by cpu to land on arch defined landing pad
+ * instruction.
+ */
+#define PR_SET_INDIR_BR_LP_STATUS      81
+# define PR_INDIR_BR_LP_ENABLE		   (1UL << 0)
+
+/*
+ * Prevent further changes to the specified indirect branch tracking
+ * configuration.  All bits may be locked via this call, including
+ * undefined bits.
+ */
+#define PR_LOCK_INDIR_BR_LP_STATUS      82
+
 #endif /* _LINUX_PRCTL_H */

src/include/uapi/linux/stddef.h

@@ -69,6 +69,10 @@
 #define __counted_by_be(m)
 #endif
 
+#ifndef __counted_by_ptr
+#define __counted_by_ptr(m)
+#endif
+
 #define __kernel_nonstring
 
 #endif /* _LINUX_STDDEF_H */

src/include/uapi/linux/typelimits.h

@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_TYPELIMITS_H
+#define _LINUX_TYPELIMITS_H
+
+#define __KERNEL_INT_MAX ((int)(~0U >> 1))
+#define __KERNEL_INT_MIN (-__KERNEL_INT_MAX - 1)
+
+#endif /* _LINUX_TYPELIMITS_H */

src/login/logind-dbus.c

@@ -2927,7 +2927,6 @@ static int method_can_shutdown_or_sleep(
         _cleanup_(sd_bus_creds_unrefp) sd_bus_creds *creds = NULL;
         bool multiple_sessions, challenge, blocked, check_unit_state = true;
         const HandleActionData *a;
-        const char *result = NULL;
         uid_t uid;
         int r;
 
@@ -2984,12 +2983,27 @@ static int method_can_shutdown_or_sleep(
                 if (r < 0)
                         return r;
 
-                if (!streq(load_state, "loaded")) {
+                if (!streq(load_state, "loaded"))
-                        result = "no";
+                        return sd_bus_reply_method_return(message, "s", "no");
-                        goto finish;
-                }
         }
 
+        const char *result;
+        r = bus_test_polkit(
+                        message,
+                        a->polkit_action,
+                        /* details= */ NULL,
+                        /* good_user= */ UID_INVALID,
+                        &challenge,
+                        error);
+        if (r < 0)
+                return r;
+        if (r > 0)
+                result = "yes";
+        else if (challenge)
+                result = "challenge";
+        else
+                result = "no";
+
         if (multiple_sessions) {
                 r = bus_test_polkit(
                                 message,
@@ -3001,12 +3015,13 @@ static int method_can_shutdown_or_sleep(
                 if (r < 0)
                         return r;
 
-                if (r > 0)
+                if (r == 0) {
-                        result = "yes";
+                        if (challenge) {
-                else if (challenge)
+                                if (streq(result, "yes")) /* Avoid upgrading no -> challenge */
-                        result = "challenge";
+                                        result = "challenge";
-                else
+                        } else
-                        result = "no";
+                                result = "no";
+                }
         }
 
         if (blocked) {
@@ -3020,39 +3035,21 @@ static int method_can_shutdown_or_sleep(
                 if (r < 0)
                         return r;
 
-                if (r > 0) {
+                if (r == 0) {
-                        if (!result)
+                        if (challenge) {
-                                result = "yes";
+                                if (streq(result, "yes"))
-                } else if (challenge) {
+                                        result = "inhibited";
-                        if (!result || streq(result, "yes"))
+                                /* If result is already "challenge" or "no", the held inhibitor has no effect */
-                                result = "challenge";
+                        } else {
-                } else
+                                if (streq(result, "yes"))
-                        result = "no";
+                                        result = "inhibitor-blocked";
+                                else if (streq(result, "challenge"))
+                                        result = "challenge-inhibitor-blocked";
+                                /* If the result is already "no", the held inhibitor has no effect */
+                        }
+                }
         }
 
-        if (!multiple_sessions && !blocked) {
-                /* If neither inhibit nor multiple sessions
-                 * apply then just check the normal policy */
-
-                r = bus_test_polkit(
-                                message,
-                                a->polkit_action,
-                                /* details= */ NULL,
-                                /* good_user= */ UID_INVALID,
-                                &challenge,
-                                error);
-                if (r < 0)
-                        return r;
-
-                if (r > 0)
-                        result = "yes";
-                else if (challenge)
-                        result = "challenge";
-                else
-                        result = "no";
-        }
-
- finish:
         return sd_bus_reply_method_return(message, "s", result);
 }
 
@@ -3963,7 +3960,7 @@ static const sd_bus_vtable manager_vtable[] = {
         SD_BUS_PROPERTY("RuntimeDirectorySize", "t", NULL, offsetof(Manager, runtime_dir_size), SD_BUS_VTABLE_PROPERTY_CONST),
         SD_BUS_PROPERTY("RuntimeDirectoryInodesMax", "t", NULL, offsetof(Manager, runtime_dir_inodes), SD_BUS_VTABLE_PROPERTY_CONST),
         SD_BUS_PROPERTY("InhibitorsMax", "t", NULL, offsetof(Manager, inhibitors_max), SD_BUS_VTABLE_PROPERTY_CONST),
-        SD_BUS_PROPERTY("NCurrentInhibitors", "t", property_get_hashmap_size, offsetof(Manager, inhibitors), 0),
+        SD_BUS_PROPERTY("NCurrentInhibitors", "t", property_get_hashmap_size, offsetof(Manager, inhibitors), SD_BUS_VTABLE_PROPERTY_EMITS_CHANGE),
         SD_BUS_PROPERTY("SessionsMax", "t", NULL, offsetof(Manager, sessions_max), SD_BUS_VTABLE_PROPERTY_CONST),
         SD_BUS_PROPERTY("NCurrentSessions", "t", property_get_hashmap_size, offsetof(Manager, sessions), 0),
         SD_BUS_PROPERTY("UserTasksMax", "t", property_get_compat_user_tasks_max, 0, SD_BUS_VTABLE_PROPERTY_CONST|SD_BUS_VTABLE_HIDDEN),

src/login/logind-inhibit.c

@@ -148,13 +148,11 @@ static int inhibitor_save(Inhibitor *i) {
 }
 
 static int bus_manager_send_inhibited_change(Inhibitor *i) {
-        const char *property;
-
         assert(i);
 
-        property = IN_SET(i->mode, INHIBIT_BLOCK, INHIBIT_BLOCK_WEAK) ? "BlockInhibited" : "DelayInhibited";
+        return manager_send_changed(i->manager,
-
+                                    i->mode == INHIBIT_DELAY ? "DelayInhibited" : "BlockInhibited",
-        return manager_send_changed(i->manager, property);
+                                    "NCurrentInhibitors");
 }
 
 int inhibitor_start(Inhibitor *i) {

src/resolve/resolved-dns-browse-services.c

@@ -155,7 +155,7 @@ static int mdns_maintenance_query(sd_event_source *s, uint64_t usec, void *userd
         return 0;
 }
 
-int dns_add_new_service(DnsServiceBrowser *sb, DnsResourceRecord *rr, int owner_family, usec_t until) {
+int dns_add_new_service(DnsServiceBrowser *sb, DnsResourceRecord *rr, int owner_family, int ifindex, usec_t until) {
         _cleanup_(dnssd_discovered_service_unrefp) DnssdDiscoveredService *s = NULL;
         int r;
 
@@ -173,6 +173,7 @@ int dns_add_new_service(DnsServiceBrowser *sb, DnsResourceRecord *rr, int owner_
                 .service_browser = sb,
                 .rr = dns_resource_record_copy(rr),
                 .family = owner_family,
+                .ifindex = ifindex,
                 .until = until,
                 .query = NULL,
                 .rr_ttl_state = DNS_RECORD_TTL_STATE_80_PERCENT,
@@ -326,6 +327,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
         DNS_ANSWER_FOREACH_ITEM(item, answer) {
                 _cleanup_free_ char *name = NULL, *type = NULL, *domain = NULL;
                 _cleanup_(sd_json_variant_unrefp) sd_json_variant *entry = NULL;
+                int ifindex;
 
                 if (dns_service_match_and_update(sb->dns_services, item->rr, owner_family, item->until))
                         continue;
@@ -349,7 +351,10 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                 if (!type)
                         continue;
 
-                r = dns_add_new_service(sb, item->rr, owner_family, item->until);
+                /* Prefer the per-item ifindex, fall back to the service browser's ifindex */
+                ifindex = item->ifindex > 0 ? item->ifindex : sb->ifindex;
+
+                r = dns_add_new_service(sb, item->rr, owner_family, ifindex, item->until);
                 if (r < 0) {
                         log_error_errno(r, "Failed to add new DNS service: %m");
                         goto finish;
@@ -360,7 +365,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                           strna(type),
                           strna(domain),
                           strna(af_to_ipv4_ipv6(owner_family)),
-                          sb->ifindex);
+                          ifindex);
 
                 r = sd_json_buildo(
                                 &entry,
@@ -375,7 +380,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                                                 !isempty(type), "type", SD_JSON_BUILD_STRING(type)),
                                 SD_JSON_BUILD_PAIR_CONDITION(
                                                 !isempty(domain), "domain", SD_JSON_BUILD_STRING(domain)),
-                                SD_JSON_BUILD_PAIR_INTEGER("ifindex", sb->ifindex));
+                                SD_JSON_BUILD_PAIR_INTEGER("ifindex", ifindex));
                 if (r < 0) {
                         log_error_errno(r, "Failed to build JSON for new service: %m");
                         goto finish;
@@ -392,6 +397,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
         LIST_FOREACH(dns_services, service, sb->dns_services) {
                 _cleanup_free_ char *name = NULL, *type = NULL, *domain = NULL;
                 _cleanup_(sd_json_variant_unrefp) sd_json_variant *entry = NULL;
+                int ifindex;
 
                 if (service->family != owner_family)
                         continue;
@@ -416,6 +422,9 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                         }
                 }
 
+                /* Capture ifindex before removing the service */
+                ifindex = service->ifindex;
+
                 dns_remove_service(sb, service);
 
                 log_debug("Remove from the list %s, %s, %s, %s, %d",
@@ -423,7 +432,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                           strna(type),
                           strna(domain),
                           strna(af_to_ipv4_ipv6(owner_family)),
-                          sb->ifindex);
+                          ifindex);
 
                 r = sd_json_buildo(
                                 &entry,
@@ -435,7 +444,7 @@ int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int ow
                                 SD_JSON_BUILD_PAIR_STRING("name", name ?: ""),
                                 SD_JSON_BUILD_PAIR_STRING("type", type ?: ""),
                                 SD_JSON_BUILD_PAIR_STRING("domain", domain ?: ""),
-                                SD_JSON_BUILD_PAIR_INTEGER("ifindex", sb->ifindex));
+                                SD_JSON_BUILD_PAIR_INTEGER("ifindex", ifindex));
                 if (r < 0) {
                         log_error_errno(r, "Failed to build JSON for removed service: %m");
                         goto finish;
@@ -473,19 +482,61 @@ finish:
 
 int mdns_browser_revisit_cache(DnsServiceBrowser *sb, int owner_family) {
         _cleanup_(dns_answer_unrefp) DnsAnswer *lookup_ret_answer = NULL;
-        DnsScope *scope;
         int r;
 
         assert(sb);
         assert(sb->manager);
 
-        scope = manager_find_scope_from_protocol(sb->manager, sb->ifindex, DNS_PROTOCOL_MDNS, owner_family);
+        /* ifindex=0 means "all interfaces" */
+        if (sb->ifindex == 0) {
+                LIST_FOREACH(scopes, scope, sb->manager->dns_scopes) {
+                        _cleanup_(dns_answer_unrefp) DnsAnswer *answer = NULL;
+
+                        if (scope->protocol != DNS_PROTOCOL_MDNS)
+                                continue;
+
+                        if (scope->family != owner_family)
+                                continue;
+
+                        dns_cache_prune(&scope->cache);
+
+                        r = dns_cache_lookup(
+                                        &scope->cache,
+                                        sb->key,
+                                        sb->flags,
+                                        /* ret_rcode= */ NULL,
+                                        &answer,
+                                        /* ret_full_packet= */ NULL,
+                                        /* ret_query_flags= */ NULL,
+                                        /* ret_dnssec_result= */ NULL);
+                        if (r < 0)
+                                return log_error_errno(r, "Failed to look up DNS cache for service browser key on scope %s: %m",
+                                                       dns_scope_ifname(scope) ?: "global");
+
+                        r = mdns_manage_services_answer(sb, answer, owner_family);
+                        if (r < 0)
+                                return log_error_errno(r, "Failed to manage mDNS services after cache lookup on scope %s: %m",
+                                                       dns_scope_ifname(scope) ?: "global");
+                }
+                return 0;
+        }
+
+        /* Single scope for specifically requested interface */
+        DnsScope *scope = manager_find_scope_from_protocol(sb->manager, sb->ifindex, DNS_PROTOCOL_MDNS, owner_family);
         if (!scope)
                 return 0;
 
         dns_cache_prune(&scope->cache);
 
-        r = dns_cache_lookup(&scope->cache, sb->key, sb->flags, NULL, &lookup_ret_answer, NULL, NULL, NULL);
+        r = dns_cache_lookup(
+                        &scope->cache,
+                        sb->key,
+                        sb->flags,
+                        /* ret_rcode= */ NULL,
+                        &lookup_ret_answer,
+                        /* ret_full_packet= */ NULL,
+                        /* ret_query_flags= */ NULL,
+                        /* ret_dnssec_result= */ NULL);
         if (r < 0)
                 return log_error_errno(r, "Failed to look up DNS cache for service browser key: %m");
 
@@ -667,6 +718,9 @@ int dns_subscribe_browse_service(
         if (ifindex < 0)
                 return sd_varlink_error_invalid_parameter_name(link, "ifindex");
 
+        if (ifindex == 0)
+                log_debug("BrowseServices: browsing all mDNS interfaces");
+
         if (isempty(type))
                 type = NULL;
         else if (!dnssd_srv_type_is_valid(type))

src/resolve/resolved-dns-browse-services.h

@@ -30,6 +30,7 @@ struct DnssdDiscoveredService {
         sd_event_source *schedule_event;
         DnsResourceRecord *rr;
         int family;
+        int ifindex;
         usec_t until;
         DnsRecordTTLState rr_ttl_state;
         DnsQuery *query;
@@ -66,7 +67,7 @@ DEFINE_TRIVIAL_CLEANUP_FUNC(DnssdDiscoveredService *, dnssd_discovered_service_u
 
 bool dns_service_match_and_update(DnssdDiscoveredService *services, DnsResourceRecord *rr, int owner_family, usec_t until);
 int mdns_manage_services_answer(DnsServiceBrowser *sb, DnsAnswer *answer, int owner_family);
-int dns_add_new_service(DnsServiceBrowser *sb, DnsResourceRecord *rr, int owner_family, usec_t until);
+int dns_add_new_service(DnsServiceBrowser *sb, DnsResourceRecord *rr, int owner_family, int ifindex, usec_t until);
 int mdns_service_update(DnssdDiscoveredService *service, DnsResourceRecord *rr, usec_t t, usec_t until);
 int mdns_browser_revisit_cache(DnsServiceBrowser *sb, int owner_family);
 int dns_subscribe_browse_service(

src/test/test-varlink-idl.c

@@ -24,6 +24,7 @@
 #include "varlink-io.systemd.Hostname.h"
 #include "varlink-io.systemd.Import.h"
 #include "varlink-io.systemd.Journal.h"
+#include "varlink-io.systemd.JournalAccess.h"
 #include "varlink-io.systemd.Login.h"
 #include "varlink-io.systemd.Machine.h"
 #include "varlink-io.systemd.MachineImage.h"
@@ -188,6 +189,7 @@ TEST(parse_format) {
                 &vl_interface_io_systemd_Hostname,
                 &vl_interface_io_systemd_Import,
                 &vl_interface_io_systemd_Journal,
+                &vl_interface_io_systemd_JournalAccess,
                 &vl_interface_io_systemd_Login,
                 &vl_interface_io_systemd_Machine,
                 &vl_interface_io_systemd_MachineImage,

test/units/TEST-89-RESOLVED-MDNS.sh

@@ -193,6 +193,50 @@ testcase_single_service_multiple_times() {
     done
 }
 
+# Helper function to run browse services with a custom ifindex
+run_and_check_services_with_ifindex() {
+    local service_id="${1:?}"
+    local check_func="${2:?}"
+    local ifindex="${3:?}"
+    local unit_name="varlinkctl-$service_id-$SRANDOM.service"
+    local i out_file parameters service_type svc tmp_file
+
+    out_file="$(mktemp)"
+    error_file="$(mktemp)"
+    tmp_file="$(mktemp)"
+    service_type="_testService$service_id._udp"
+    parameters="{ \"domain\": \"$service_type.local\", \"type\": \"\", \"ifindex\": $ifindex, \"flags\": 16785432 }"
+
+    systemd-run --unit="$unit_name" --service-type=exec -p StandardOutput="file:$out_file" -p StandardError="file:$error_file" \
+        varlinkctl call --more /run/systemd/resolve/io.systemd.Resolve io.systemd.Resolve.BrowseServices "$parameters"
+
+    # shellcheck disable=SC2064
+    # Note: same as above about unregistering the trap once it's fired
+    trap "trap - RETURN; systemctl stop $unit_name" RETURN
+
+    for _ in {0..14}; do
+        if [[ -s "$out_file" ]]; then
+            grep -o '"name":"[^"]*"' "$out_file" | sed 's/"name":"//;s/"//g' | sort | tee "$tmp_file"
+            if "$check_func" "$service_id" "$tmp_file"; then
+                return 0
+            fi
+        fi
+
+        sleep 2
+    done
+
+    cat "$out_file"
+    cat "$error_file"
+    return 1
+}
+
+testcase_browse_all_interfaces_ifindex_zero() {
+    : "Test browsing all interfaces with ifindex=0"
+    resolvectl flush-caches
+    # Using ifindex=0 should discover services on all mDNS interfaces
+    run_and_check_services_with_ifindex 0 check_both 0
+}
+
 testcase_second_unreachable() {
     : "Test each service type while the second container is unreachable"
     systemd-run -M "$CONTAINER_2" --wait --pipe -- networkctl down host0

units/systemd-journalctl.socket

@@ -12,6 +12,7 @@ Description=Journal Log Access Socket
 Documentation=man:journalctl(1)
 DefaultDependencies=no
 Before=sockets.target
+After=systemd-sysusers.service
 
 [Socket]
 ListenStream=/run/systemd/io.systemd.JournalAccess